[PATCH] drm/imx: ipuv3-plane: add zpos property

Philipp Zabel p.zabel at pengutronix.de
Mon Dec 3 09:49:56 UTC 2018


Add a zpos property to planes. Call drm_atomic_helper_check() instead of
calling drm_atomic_helper_check_modeset() and drm_atomic_check_planes()
manually. This effectively adds a call to drm_atoimic_normalize_zpos()
before checking planes. Reorder atomic update to allow changing plane
zpos without modeset.

Note that the initial zpos is set in ipu_plane_state_reset(). The
initial value set in ipu_plane_init() is just for show. The zpos
parameter of drm_plane_create_zpos_property() is ignored because
the newly created plane do not have state yet.

Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
---
 drivers/gpu/drm/imx/imx-drm-core.c |  7 ++--
 drivers/gpu/drm/imx/ipuv3-plane.c  | 56 +++++++++++++++++-------------
 2 files changed, 33 insertions(+), 30 deletions(-)

diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c
index 820c7e3878f0..687cfb9d410e 100644
--- a/drivers/gpu/drm/imx/imx-drm-core.c
+++ b/drivers/gpu/drm/imx/imx-drm-core.c
@@ -49,11 +49,7 @@ static int imx_drm_atomic_check(struct drm_device *dev,
 {
 	int ret;
 
-	ret = drm_atomic_helper_check_modeset(dev, state);
-	if (ret)
-		return ret;
-
-	ret = drm_atomic_helper_check_planes(dev, state);
+	ret = drm_atomic_helper_check(dev, state);
 	if (ret)
 		return ret;
 
@@ -229,6 +225,7 @@ static int imx_drm_bind(struct device *dev)
 	drm->mode_config.funcs = &imx_drm_mode_config_funcs;
 	drm->mode_config.helper_private = &imx_drm_mode_config_helpers;
 	drm->mode_config.allow_fb_modifiers = true;
+	drm->mode_config.normalize_zpos = true;
 
 	drm_mode_config_init(drm);
 
diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c
index d6d9ab5b33db..508ce655d638 100644
--- a/drivers/gpu/drm/imx/ipuv3-plane.c
+++ b/drivers/gpu/drm/imx/ipuv3-plane.c
@@ -273,6 +273,7 @@ static void ipu_plane_destroy(struct drm_plane *plane)
 
 static void ipu_plane_state_reset(struct drm_plane *plane)
 {
+	unsigned int zpos = (plane->type == DRM_PLANE_TYPE_PRIMARY) ? 0 : 1;
 	struct ipu_plane_state *ipu_state;
 
 	if (plane->state) {
@@ -284,8 +285,11 @@ static void ipu_plane_state_reset(struct drm_plane *plane)
 
 	ipu_state = kzalloc(sizeof(*ipu_state), GFP_KERNEL);
 
-	if (ipu_state)
+	if (ipu_state) {
 		__drm_atomic_helper_plane_reset(plane, &ipu_state->base);
+		ipu_state->base.zpos = zpos;
+		ipu_state->base.normalized_zpos = zpos;
+	}
 }
 
 static struct drm_plane_state *
@@ -560,6 +564,25 @@ static void ipu_plane_atomic_update(struct drm_plane *plane,
 	if (ipu_plane->dp_flow == IPU_DP_FLOW_SYNC_FG)
 		ipu_dp_set_window_pos(ipu_plane->dp, dst->x1, dst->y1);
 
+	switch (ipu_plane->dp_flow) {
+	case IPU_DP_FLOW_SYNC_BG:
+		if (state->normalized_zpos == 1) {
+			ipu_dp_set_global_alpha(ipu_plane->dp,
+						!fb->format->has_alpha, 0xff,
+						true);
+		} else {
+			ipu_dp_set_global_alpha(ipu_plane->dp, true, 0, true);
+		}
+		break;
+	case IPU_DP_FLOW_SYNC_FG:
+		if (state->normalized_zpos == 1) {
+			ipu_dp_set_global_alpha(ipu_plane->dp,
+						!fb->format->has_alpha, 0xff,
+						false);
+		}
+		break;
+	}
+
 	eba = drm_plane_state_to_eba(state, 0);
 
 	/*
@@ -596,34 +619,11 @@ static void ipu_plane_atomic_update(struct drm_plane *plane,
 	switch (ipu_plane->dp_flow) {
 	case IPU_DP_FLOW_SYNC_BG:
 		ipu_dp_setup_channel(ipu_plane->dp, ics, IPUV3_COLORSPACE_RGB);
-		ipu_dp_set_global_alpha(ipu_plane->dp, true, 0, true);
 		break;
 	case IPU_DP_FLOW_SYNC_FG:
 		ipu_dp_setup_channel(ipu_plane->dp, ics,
 					IPUV3_COLORSPACE_UNKNOWN);
-		/* Enable local alpha on partial plane */
-		switch (fb->format->format) {
-		case DRM_FORMAT_ARGB1555:
-		case DRM_FORMAT_ABGR1555:
-		case DRM_FORMAT_RGBA5551:
-		case DRM_FORMAT_BGRA5551:
-		case DRM_FORMAT_ARGB4444:
-		case DRM_FORMAT_ARGB8888:
-		case DRM_FORMAT_ABGR8888:
-		case DRM_FORMAT_RGBA8888:
-		case DRM_FORMAT_BGRA8888:
-		case DRM_FORMAT_RGB565_A8:
-		case DRM_FORMAT_BGR565_A8:
-		case DRM_FORMAT_RGB888_A8:
-		case DRM_FORMAT_BGR888_A8:
-		case DRM_FORMAT_RGBX8888_A8:
-		case DRM_FORMAT_BGRX8888_A8:
-			ipu_dp_set_global_alpha(ipu_plane->dp, false, 0, false);
-			break;
-		default:
-			ipu_dp_set_global_alpha(ipu_plane->dp, true, 0, true);
-			break;
-		}
+		break;
 	}
 
 	ipu_dmfc_config_wait4eot(ipu_plane->dmfc, drm_rect_width(dst));
@@ -826,6 +826,7 @@ struct ipu_plane *ipu_plane_init(struct drm_device *dev, struct ipu_soc *ipu,
 {
 	struct ipu_plane *ipu_plane;
 	const uint64_t *modifiers = ipu_format_modifiers;
+	unsigned int zpos = (type == DRM_PLANE_TYPE_PRIMARY) ? 0 : 1;
 	int ret;
 
 	DRM_DEBUG_KMS("channel %d, dp flow %d, possible_crtcs=0x%x\n",
@@ -856,5 +857,10 @@ struct ipu_plane *ipu_plane_init(struct drm_device *dev, struct ipu_soc *ipu,
 
 	drm_plane_helper_add(&ipu_plane->base, &ipu_plane_helper_funcs);
 
+	if (dp == IPU_DP_FLOW_SYNC_BG || dp == IPU_DP_FLOW_SYNC_FG)
+		drm_plane_create_zpos_property(&ipu_plane->base, zpos, 0, 1);
+	else
+		drm_plane_create_zpos_immutable_property(&ipu_plane->base, 0);
+
 	return ipu_plane;
 }
-- 
2.19.1



More information about the dri-devel mailing list