[Freedreno] [PATCH v2] drm/msm/dpu: add display port support in DPU
Sean Paul
sean at poorly.run
Tue Dec 4 13:52:04 UTC 2018
On Mon, Dec 03, 2018 at 07:02:07PM -0800, Jeykumar Sankaran wrote:
> On 2018-12-03 06:47, Sean Paul wrote:
> > On Tue, Nov 27, 2018 at 02:28:30PM -0800, Jeykumar Sankaran wrote:
> > > Add display port support in DPU by creating hooks
> > > for DP encoder enumeration and encoder mode
> > > initialization.
> > >
> > > This change is based on the SDM845 Display port
> > > driver changes[1].
> > >
> > > changes in v2:
> > > - rebase on [2] (Sean Paul)
> > > - remove unwanted error checks and
> > > switch cases (Jordan Crouse)
> > >
> > > [1] https://lwn.net/Articles/768265/
> > > [2] https://lkml.org/lkml/2018/11/17/87
> > >
> > > Signed-off-by: Jeykumar Sankaran <jsanka at codeaurora.org>
> > > ---
> > > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 8 ++---
> > > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 47
> > +++++++++++++++++++++++++----
> > > 2 files changed, 45 insertions(+), 10 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > > index d3f4501..1f6b4b1 100644
> > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > > @@ -2015,7 +2015,7 @@ static int dpu_encoder_setup_display(struct
> > dpu_encoder_virt *dpu_enc,
> > > {
> > > int ret = 0;
> > > int i = 0;
> > > - enum dpu_intf_type intf_type;
> > > + enum dpu_intf_type intf_type = INTF_NONE;
> >
> > dpu_intf_type seems unnecessary, you could just use the
> > DRM_MODE_ENCODER_*
> > value
> > directly?
> >
> > > struct dpu_enc_phys_init_params phys_params;
> > >
> > > if (!dpu_enc || !dpu_kms) {
> > > @@ -2038,9 +2038,9 @@ static int dpu_encoder_setup_display(struct
> > dpu_encoder_virt *dpu_enc,
> > > case DRM_MODE_ENCODER_DSI:
> > > intf_type = INTF_DSI;
> > > break;
> > > - default:
> > > - DPU_ERROR_ENC(dpu_enc, "unsupported display interface
> > type\n");
> > > - return -EINVAL;
> > > + case DRM_MODE_ENCODER_TMDS:
> > > + intf_type = INTF_DP;
> > > + break;
> > > }
> > >
> > > WARN_ON(disp_info->num_of_h_tiles < 1);
> > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > > index 985c855..7d931ae 100644
> > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > > @@ -473,6 +473,32 @@ static void _dpu_kms_initialize_dsi(struct
> > drm_device *dev,
> > > }
> > > }
> > >
> > > +static void _dpu_kms_initialize_displayport(struct drm_device *dev,
> > > + struct msm_drm_private *priv,
> > > + struct dpu_kms *dpu_kms)
> > > +{
> > > + struct drm_encoder *encoder = NULL;
> > > + int rc;
> > > +
> > > + if (!priv->dp)
> > > + return;
> > > +
> > > + encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
> > > + if (IS_ERR(encoder)) {
> > > + DPU_ERROR("encoder init failed for dsi display\n");
> > > + return;
> > > + }
> > > +
> > > + rc = msm_dp_modeset_init(priv->dp, dev, encoder);
> > > + if (rc) {
> > > + DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
> > > + drm_encoder_cleanup(encoder);
> > > + return;
> > > + }
> > > +
> > > + priv->encoders[priv->num_encoders++] = encoder;
> >
> > No need to keep track of drm resources at the driver level, the core
> > will
> > do
> > this for you. So can you please add a patch preceding this one to remove
> > the
> > priv->encoders/crtc/planes/connectors arrays?
> >
> priv arrays for tracking drm components and priv->num_** counters are
> introduced
> by mdp4/5. DPU just adapted the implementation.
>
> De-coupling DPU from these arrays is much easier than fixing them in mdp4/5.
> I see
> mdp5 is using it to track the max resources and also in ./msm_fbdev.c.
Ok, I'll take a look at it
Sean
>
> Thanks and Regards,
> Jeykumar S.
> > > +}
> > > +
> > > /**
> > > * _dpu_kms_setup_displays - create encoders, bridges and connectors
> > > * for underlying displays
> > > @@ -487,6 +513,8 @@ static void _dpu_kms_setup_displays(struct
> > drm_device *dev,
> >
> > Why are these functions voids? Seems like there are plenty of places for
> > them to
> > fail :)
> >
> > Let's add a patch to the beginning of this series to properly handle
> > failures in
> > setup_displays and initialize_dsi
> >
> > > {
> > > _dpu_kms_initialize_dsi(dev, priv, dpu_kms);
> > >
> > > + _dpu_kms_initialize_displayport(dev, priv, dpu_kms);
> > > +
> > > /**
> > > * Extend this function to initialize other
> > > * types of displays
> > > @@ -723,13 +751,20 @@ static void _dpu_kms_set_encoder_mode(struct
> > msm_kms *kms,
> > > info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
> > > MSM_DISPLAY_CAP_VID_MODE;
> > >
> > > - /* TODO: No support for DSI swap */
> > > - for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
> > > - if (priv->dsi[i]) {
> > > - info.h_tile_instance[info.num_of_h_tiles] = i;
> > > - info.num_of_h_tiles++;
> > > + switch (info.intf_type) {
> > > + case DRM_MODE_ENCODER_DSI:
> > > + /* TODO: No support for DSI swap */
> > > + for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
> > > + if (priv->dsi[i]) {
> > > + info.h_tile_instance[info.num_of_h_tiles]
> > = i;
> > > + info.num_of_h_tiles++;
> > > + }
> > > }
> > > - }
> > > + break;
> > > + case DRM_MODE_ENCODER_TMDS:
> > > + info.num_of_h_tiles = 1;
> > > + break;
> > > + };
> > >
> > > rc = dpu_encoder_setup(encoder->dev, encoder, &info);
> > > if (rc)
> > > --
> > > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> > Forum,
> > > a Linux Foundation Collaborative Project
> > >
> > > _______________________________________________
> > > Freedreno mailing list
> > > Freedreno at lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/freedreno
>
> --
> Jeykumar S
--
Sean Paul, Software Engineer, Google / Chromium OS
More information about the dri-devel
mailing list