[PATCH v2 0/9] phy: Add configuration interface for MIPI D-PHY devices

[Kishon Vijay Abraham I]

Maxime,

On 06/11/18 8:24 PM, Maxime Ripard wrote:
> Hi,
> 
> Here is a set of patches to allow the phy framework consumers to test and
> apply runtime configurations.
> 
> This is needed to support more phy classes that require tuning based on
> parameters depending on the current use case of the device, in addition to
> the power state management already provided by the current functions.
> 
> A first test bed for that API are the MIPI D-PHY devices. There's a number
> of solutions that have been used so far to support these phy, most of the
> time being an ad-hoc driver in the consumer.
> 
> That approach has a big shortcoming though, which is that this is quite
> difficult to deal with consumers integrated with multiple variants of phy,
> of multiple consumers integrated with the same phy.
> 
> The latter case can be found in the Cadence DSI bridge, and the CSI
> transceiver and receivers. All of them are integrated with the same phy, or
> can be integrated with different phy, depending on the implementation.
> 
> I've looked at all the MIPI DSI drivers I could find, and gathered all the
> parameters I could find. The interface should be complete, and most of the
> drivers can be converted in the future. The current set converts two of
> them: the above mentionned Cadence DSI driver so that the v4l2 drivers can
> use them, and the Allwinner MIPI-DSI driver.

Are you planning to send one more revision of this series after fixing the
comments?

Thanks
Kishon
> 
> Let me know what you think,
> Maxime
> 
> Changes from v1:
>   - Rebased on top of 4.20-rc1
>   - Removed the bus mode and timings parameters from the MIPI D-PHY
>     parameters, since that shouldn't have any impact on the PHY itself.
>   - Reworked the Cadence DSI and D-PHY drivers to take this into account.
>   - Remove the mode parameter from phy_configure
>   - Added phy_configure and phy_validate stubs
>   - Return -EOPNOTSUPP in phy_configure and phy_validate when the operation
>     is not implemented
> 
> Maxime Ripard (9):
>   phy: Add MIPI D-PHY mode
>   phy: Add configuration interface
>   phy: Add MIPI D-PHY configuration options
>   phy: dphy: Add configuration helpers
>   sun6i: dsi: Convert to generic phy handling
>   phy: Move Allwinner A31 D-PHY driver to drivers/phy/
>   drm/bridge: cdns: Separate DSI and D-PHY configuration
>   phy: Add Cadence D-PHY support
>   drm/bridge: cdns: Convert to phy framework
> 
>  Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt |  21 +-
>  Documentation/devicetree/bindings/phy/cdns,dphy.txt           |  20 +-
>  drivers/gpu/drm/bridge/cdns-dsi.c                             | 535 +------
>  drivers/gpu/drm/sun4i/Kconfig                                 |   3 +-
>  drivers/gpu/drm/sun4i/Makefile                                |   5 +-
>  drivers/gpu/drm/sun4i/sun6i_mipi_dphy.c                       | 292 +----
>  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c                        |  31 +-
>  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h                        |  17 +-
>  drivers/phy/Kconfig                                           |   8 +-
>  drivers/phy/Makefile                                          |   1 +-
>  drivers/phy/allwinner/Kconfig                                 |  12 +-
>  drivers/phy/allwinner/Makefile                                |   1 +-
>  drivers/phy/allwinner/phy-sun6i-mipi-dphy.c                   | 318 ++++-
>  drivers/phy/cadence/Kconfig                                   |  13 +-
>  drivers/phy/cadence/Makefile                                  |   1 +-
>  drivers/phy/cadence/cdns-dphy.c                               | 459 ++++++-
>  drivers/phy/phy-core-mipi-dphy.c                              | 160 ++-
>  drivers/phy/phy-core.c                                        |  61 +-
>  include/linux/phy/phy-mipi-dphy.h                             | 238 +++-
>  include/linux/phy/phy.h                                       |  65 +-
>  20 files changed, 1482 insertions(+), 779 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt
>  delete mode 100644 drivers/gpu/drm/sun4i/sun6i_mipi_dphy.c
>  create mode 100644 drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
>  create mode 100644 drivers/phy/cadence/cdns-dphy.c
>  create mode 100644 drivers/phy/phy-core-mipi-dphy.c
>  create mode 100644 include/linux/phy/phy-mipi-dphy.h
> 
> base-commit: 651022382c7f8da46cb4872a545ee1da6d097d2a
>