[PATCH v8 06/35] drm/i915: Enable and Disable of HDCP2.2

Daniel Vetter daniel at ffwll.ch
Fri Dec 7 14:33:25 UTC 2018


On Fri, Dec 07, 2018 at 11:52:21AM +0530, C, Ramalingam wrote:
> 
> On 12/6/2018 4:00 PM, Daniel Vetter wrote:
> > On Tue, Nov 27, 2018 at 04:13:04PM +0530, Ramalingam C wrote:
> > > Considering that HDCP2.2 is more secure than HDCP1.4, When a setup
> > > supports HDCP2.2 and HDCP1.4, HDCP2.2 will be enabled.
> > > 
> > > When HDCP2.2 enabling fails and HDCP1.4 is supported, HDCP1.4 is
> > > enabled.
> > > 
> > > This change implements a sequence of enabling and disabling of
> > > HDCP2.2 authentication and HDCP2.2 port encryption.
> > Patch series suggestion for next time around: First build out the helper
> > functions, then time them into the big picture like here. Personally I
> > think that makes it easier to understand, but it's kinda personal choice.
> 
> Tried that already. But bisecting will give warnings as "defined but unused
> functions"
> 
> Hence moved to this approach.

Ah right, that's the annoying part with that approach. I tend to just
ignore that until the series is built up (it's just a warning), but good
point. As mentioned, there's pro/cons to each approach.
-Daniel

> 
> > I guess this here works too.
> > 
> > > v2:
> > >    Included few optimization suggestions [Chris Wilson]
> > >    Commit message is updated as per the rebased version.
> > >    intel_wait_for_register is used instead of wait_for. [Chris Wilson]
> > > v3:
> > >    No changes.
> > > v4:
> > >    Extra comment added and Style issue fixed [Uma]
> > > v5:
> > >    Rebased as part of patch reordering.
> > >    HDCP2 encryption status is tracked.
> > >    HW state check is moved into WARN_ON [Daniel]
> > > v6:
> > >    Redefined the mei service functions as per comp redesign.
> > >    Merged patches related to hdcp2.2 enabling and disabling [Sean Paul].
> > >    Required shim functionality is defined [Sean Paul]
> > > v7:
> > >    Return values are handles [Uma]
> > >    Realigned the code.
> > >    Check for comp_master is removed.
> > > v8:
> > >    HDCP2.2 is attempted only if mei interface is up.
> > >    Adjust to the new interface
> > >    Avoid bool usage in struct [Tomas]
> > > 
> > > Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
> > > ---
> > >   drivers/gpu/drm/i915/intel_drv.h  |   5 +
> > >   drivers/gpu/drm/i915/intel_hdcp.c | 223 +++++++++++++++++++++++++++++++++++---
> > >   2 files changed, 214 insertions(+), 14 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > > index bde82f3ada85..3e9f21d23442 100644
> > > --- a/drivers/gpu/drm/i915/intel_drv.h
> > > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > > @@ -383,6 +383,10 @@ struct intel_hdcp_shim {
> > >   	/* Detects the HDCP protocol(DP/HDMI) required on the port */
> > >   	enum mei_hdcp_wired_protocol (*hdcp_protocol)(void);
> > > +
> > > +	/* Detects whether Panel is HDCP2.2 capable */
> > > +	int (*hdcp_2_2_capable)(struct intel_digital_port *intel_dig_port,
> > > +				bool *capable);
> > >   };
> > >   struct intel_hdcp {
> > > @@ -396,6 +400,7 @@ struct intel_hdcp {
> > >   	/* HDCP2.2 related definitions */
> > >   	/* Flag indicates whether this connector supports HDCP2.2 or not. */
> > >   	u8 hdcp2_supported;
> > > +	u8 hdcp2_in_use;
> > >   	/*
> > >   	 * Content Stream Type defined by content owner. TYPE0(0x0) content can
> > > diff --git a/drivers/gpu/drm/i915/intel_hdcp.c b/drivers/gpu/drm/i915/intel_hdcp.c
> > > index 760780f1105c..c1bd1ccd47cd 100644
> > > --- a/drivers/gpu/drm/i915/intel_hdcp.c
> > > +++ b/drivers/gpu/drm/i915/intel_hdcp.c
> > > @@ -79,6 +79,43 @@ bool intel_hdcp_capable(struct intel_connector *connector)
> > >   	return capable;
> > >   }
> > > +/* At present whether mei_hdcp component is binded with i915 master component */
> > > +static bool intel_hdcp2_mei_binded(struct intel_connector *connector)
> > > +{
> > > +	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> > > +	struct i915_hdcp_component_master *comp = dev_priv->hdcp_comp;
> > > +
> > > +	mutex_lock(&comp->mutex);
> > > +	if (!comp->ops || !comp->dev) {
> > > +		mutex_unlock(&comp->mutex);
> > > +		return false;
> > > +	}
> > > +	mutex_unlock(&comp->mutex);
> > > +
> > > +	return true;
> > > +}
> > > +
> > > +/* Is HDCP2.2 capable on Platform and Sink */
> > > +static bool intel_hdcp2_capable(struct intel_connector *connector)
> > > +{
> > > +	struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
> > > +	struct intel_hdcp *hdcp = &connector->hdcp;
> > > +	bool capable = false;
> > > +
> > > +	/* I915 support for HDCP2.2 */
> > > +	if (!hdcp->hdcp2_supported)
> > > +		return false;
> > > +
> > > +	/* MEI services for HDCP2.2 */
> > > +	if (!intel_hdcp2_mei_binded(connector))
> > > +		return false;
> > Why do we still need this with component? Driver load should be stalled
> > out until it's all there, that was kinda the entire point of component,
> > so we don't have to recheck all the time whether hdcp2 is still there or
> > not.
> 
> We discussed this in previous patches. Lets decide whether this approach is
> good enough or not.
> 
> --Ram
> 
> > 
> > > +
> > > +	/* Sink's capability for HDCP2.2 */
> > > +	hdcp->shim->hdcp_2_2_capable(intel_dig_port, &capable);
> > > +
> > > +	return capable;
> > > +}
> > > +
> > >   static int intel_hdcp_poll_ksv_fifo(struct intel_digital_port *intel_dig_port,
> > >   				    const struct intel_hdcp_shim *shim)
> > >   {
> > > @@ -1114,8 +1151,7 @@ int hdcp2_authenticate_port(struct intel_connector *connector)
> > >   	return ret;
> > >   }
> > > -static __attribute__((unused))
> > > -int hdcp2_close_mei_session(struct intel_connector *connector)
> > > +static int hdcp2_close_mei_session(struct intel_connector *connector)
> > >   {
> > >   	struct mei_hdcp_data *data = &connector->hdcp.mei_data;
> > >   	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> > > @@ -1137,12 +1173,157 @@ int hdcp2_close_mei_session(struct intel_connector *connector)
> > >   	return ret;
> > >   }
> > > -static __attribute__((unused))
> > > -int hdcp2_deauthenticate_port(struct intel_connector *connector)
> > > +static int hdcp2_deauthenticate_port(struct intel_connector *connector)
> > >   {
> > >   	return hdcp2_close_mei_session(connector);
> > >   }
> > > +static int hdcp2_authenticate_sink(struct intel_connector *connector)
> > > +{
> > > +	DRM_ERROR("Sink authentication is done in subsequent patches\n");
> > > +
> > > +	return -EINVAL;
> > > +}
> > > +
> > > +static int hdcp2_enable_encryption(struct intel_connector *connector)
> > > +{
> > > +	struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
> > > +	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> > > +	struct intel_hdcp *hdcp = &connector->hdcp;
> > > +	enum port port = connector->encoder->port;
> > > +	int ret;
> > > +
> > > +	WARN_ON(I915_READ(HDCP2_STATUS_DDI(port)) & LINK_ENCRYPTION_STATUS);
> > > +
> > > +	if (hdcp->shim->toggle_signalling) {
> > > +		ret = hdcp->shim->toggle_signalling(intel_dig_port, true);
> > > +		if (ret) {
> > > +			DRM_ERROR("Failed to enable HDCP signalling. %d\n",
> > > +				  ret);
> > > +			return ret;
> > > +		}
> > > +	}
> > > +
> > > +	if (I915_READ(HDCP2_STATUS_DDI(port)) & LINK_AUTH_STATUS) {
> > > +		/* Link is Authenticated. Now set for Encryption */
> > > +		I915_WRITE(HDCP2_CTL_DDI(port),
> > > +			   I915_READ(HDCP2_CTL_DDI(port)) |
> > > +			   CTL_LINK_ENCRYPTION_REQ);
> > > +	}
> > > +
> > > +	ret = intel_wait_for_register(dev_priv, HDCP2_STATUS_DDI(port),
> > > +				      LINK_ENCRYPTION_STATUS,
> > > +				      LINK_ENCRYPTION_STATUS,
> > > +				      TIME_FOR_ENCRYPT_STATUS_CHANGE);
> > > +
> > > +	return ret;
> > > +}
> > > +
> > > +static int hdcp2_disable_encryption(struct intel_connector *connector)
> > > +{
> > > +	struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
> > > +	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> > > +	struct intel_hdcp *hdcp = &connector->hdcp;
> > > +	enum port port = connector->encoder->port;
> > > +	int ret;
> > > +
> > > +	WARN_ON(!(I915_READ(HDCP2_STATUS_DDI(port)) & LINK_ENCRYPTION_STATUS));
> > > +
> > > +	I915_WRITE(HDCP2_CTL_DDI(port),
> > > +		   I915_READ(HDCP2_CTL_DDI(port)) & ~CTL_LINK_ENCRYPTION_REQ);
> > > +
> > > +	ret = intel_wait_for_register(dev_priv, HDCP2_STATUS_DDI(port),
> > > +				      LINK_ENCRYPTION_STATUS, 0x0,
> > > +				      TIME_FOR_ENCRYPT_STATUS_CHANGE);
> > > +	if (ret == -ETIMEDOUT)
> > > +		DRM_DEBUG_KMS("Disable Encryption Timedout");
> > > +
> > > +	if (hdcp->shim->toggle_signalling) {
> > > +		ret = hdcp->shim->toggle_signalling(intel_dig_port, false);
> > > +		if (ret) {
> > > +			DRM_ERROR("Failed to disable HDCP signalling. %d\n",
> > > +				  ret);
> > > +			return ret;
> > > +		}
> > > +	}
> > > +
> > > +	return ret;
> > > +}
> > > +
> > > +static int hdcp2_authenticate_and_encrypt(struct intel_connector *connector)
> > > +{
> > > +	int ret, i, tries = 3;
> > > +
> > > +	for (i = 0; i < tries; i++) {
> > > +		ret = hdcp2_authenticate_sink(connector);
> > > +		if (!ret)
> > > +			break;
> > > +
> > > +		/* Clearing the mei hdcp session */
> > > +		DRM_DEBUG_KMS("HDCP2.2 Auth %d of %d Failed.(%d)\n",
> > > +			      i + 1, tries, ret);
> > > +		if (hdcp2_deauthenticate_port(connector) < 0)
> > > +			DRM_DEBUG_KMS("Port deauth failed.\n");
> > > +	}
> > > +
> > > +	if (i != tries) {
> > > +		/*
> > > +		 * Ensuring the required 200mSec min time interval between
> > > +		 * Session Key Exchange and encryption.
> > > +		 */
> > > +		msleep(HDCP_2_2_DELAY_BEFORE_ENCRYPTION_EN);
> > > +		ret = hdcp2_enable_encryption(connector);
> > > +		if (ret < 0) {
> > > +			DRM_DEBUG_KMS("Encryption Enable Failed.(%d)\n", ret);
> > > +			if (hdcp2_deauthenticate_port(connector) < 0)
> > > +				DRM_DEBUG_KMS("Port deauth failed.\n");
> > > +		}
> > > +	}
> > > +
> > > +	return ret;
> > > +}
> > > +
> > > +static int _intel_hdcp2_enable(struct intel_connector *connector)
> > > +{
> > > +	struct intel_hdcp *hdcp = &connector->hdcp;
> > > +	int ret;
> > > +
> > > +	DRM_DEBUG_KMS("[%s:%d] HDCP2.2 is being enabled. Type: %d\n",
> > > +		      connector->base.name, connector->base.base.id,
> > > +		      hdcp->content_type);
> > > +
> > > +	ret = hdcp2_authenticate_and_encrypt(connector);
> > > +	if (ret) {
> > > +		DRM_DEBUG_KMS("HDCP2 Type%d  Enabling Failed. (%d)\n",
> > > +			      hdcp->content_type, ret);
> > > +		return ret;
> > > +	}
> > > +
> > > +	DRM_DEBUG_KMS("[%s:%d] HDCP2.2 is enabled. Type %d\n",
> > > +		      connector->base.name, connector->base.base.id,
> > > +		      hdcp->content_type);
> > > +
> > > +	hdcp->hdcp2_in_use = true;
> > > +	return 0;
> > > +}
> > > +
> > > +static int _intel_hdcp2_disable(struct intel_connector *connector)
> > > +{
> > > +	int ret;
> > > +
> > > +	DRM_DEBUG_KMS("[%s:%d] HDCP2.2 is being Disabled\n",
> > > +		      connector->base.name, connector->base.base.id);
> > > +
> > > +	ret = hdcp2_disable_encryption(connector);
> > > +
> > > +	if (hdcp2_deauthenticate_port(connector) < 0)
> > > +		DRM_DEBUG_KMS("Port deauth failed.\n");
> > > +
> > > +	connector->hdcp.hdcp2_in_use = false;
> > > +
> > > +	return ret;
> > > +}
> > > +
> > >   static int i915_hdcp_component_master_bind(struct device *dev)
> > >   {
> > >   	struct drm_i915_private *dev_priv = kdev_to_i915(dev);
> > > @@ -1342,22 +1523,33 @@ void intel_hdcp_exit(struct drm_i915_private *dev_priv)
> > >   int intel_hdcp_enable(struct intel_connector *connector)
> > >   {
> > >   	struct intel_hdcp *hdcp = &connector->hdcp;
> > > -	int ret;
> > > +	int ret = -EINVAL;
> > >   	if (!hdcp->shim)
> > >   		return -ENOENT;
> > >   	mutex_lock(&hdcp->mutex);
> > > -	ret = _intel_hdcp_enable(connector);
> > > -	if (ret)
> > > -		goto out;
> > > +	/*
> > > +	 * Considering that HDCP2.2 is more secure than HDCP1.4, If the setup
> > > +	 * is capable of HDCP2.2, it is preferred to use HDCP2.2.
> > > +	 */
> > > +	if (intel_hdcp2_capable(connector))
> > > +		ret = _intel_hdcp2_enable(connector);
> > > +
> > > +	/* When HDCP2.2 fails, HDCP1.4 will be attempted */
> > > +	if (ret && intel_hdcp_capable(connector)) {
> > > +		ret = _intel_hdcp_enable(connector);
> > > +		if (!ret)
> > > +			schedule_delayed_work(&hdcp->check_work,
> > > +					      DRM_HDCP_CHECK_PERIOD_MS);
> > > +	}
> > > +
> > > +	if (!ret) {
> > > +		hdcp->value = DRM_MODE_CONTENT_PROTECTION_ENABLED;
> > > +		schedule_work(&hdcp->prop_work);
> > > +	}
> > > -	hdcp->value = DRM_MODE_CONTENT_PROTECTION_ENABLED;
> > > -	schedule_work(&hdcp->prop_work);
> > > -	schedule_delayed_work(&hdcp->check_work,
> > > -			      DRM_HDCP_CHECK_PERIOD_MS);
> > > -out:
> > >   	mutex_unlock(&hdcp->mutex);
> > >   	return ret;
> > >   }
> > > @@ -1374,7 +1566,10 @@ int intel_hdcp_disable(struct intel_connector *connector)
> > >   	if (hdcp->value != DRM_MODE_CONTENT_PROTECTION_UNDESIRED) {
> > >   		hdcp->value = DRM_MODE_CONTENT_PROTECTION_UNDESIRED;
> > > -		ret = _intel_hdcp_disable(connector);
> > > +		if (hdcp->hdcp2_in_use)
> > > +			ret = _intel_hdcp2_disable(connector);
> > > +		else
> > > +			ret = _intel_hdcp_disable(connector);
> > Looks reasonable. So one thing we could be doing is already internally
> > have a DRM_MODE_CONTENT_PROTECTION_ENABLED_TYPE1 for hdcp2.But the uapi
> > would only return _ENABLED to userspace. But for internal tracking this
> > would avoid the need for the separate hdcp2_in_use variable.
> > 
> > Probably good cleanup/prep patch for the type0/1 uapi extension, once we
> > get there.
> > 
> > Aside from the component intergration question seems all reasonable. But I
> > didn't yet review the hdcp2 flow, will do that once it's more complete in
> > later patches.
> > -Daniel
> > 
> > >   	}
> > >   	mutex_unlock(&hdcp->mutex);
> > > -- 
> > > 2.7.4
> > > 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch


More information about the dri-devel mailing list