[PATCH 2/5] drm: rcar-du: Move CRTC outputs bitmask to private CRTC state
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Sun Dec 9 20:40:10 UTC 2018
Hi Kieran,
On Friday, 7 December 2018 14:34:58 EET Kieran Bingham wrote:
> On 25/11/2018 14:40, Laurent Pinchart wrote:
> > The rcar_du_crtc outputs field stores a bitmask of the outputs driven by
> > the CRTC. This changes based on the configuration requested by
> > userspace, and is used for the sole purpose of configuring the hardware.
> > The field thus belongs to the CRTC state. Move it to the
> > rcar_du_crtc_state structure.
> >
> > As a result the rcar_du_crtc_route_output() function loses most of its
> > purpose. In order to remove it, move dpad0_source calculation to
> > rcar_du_atomic_commit_tail(), until the field gets moved to a state
> > structure. In order to simplify the rcar_du_group_set_routing()
> > implementation, we also store the DPAD1 source in a new dpad1_source
> > field which will move to a state structure with dpad0_source.
> >
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas at ideasonboard.com>
>
> that was a fairly tough read - but aside from one comment near the
> bottom regarding initialising dpad0 which I'm sure you can handle
> correctly, and another comment which I think we could improve things
> outside of this patch:
>
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
>
> > ---
> >
> > drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 42 +++++++++++------------
> > drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 7 ++--
> > drivers/gpu/drm/rcar-du/rcar_du_drv.h | 1 +
> > drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 10 ------
> > drivers/gpu/drm/rcar-du/rcar_du_group.c | 4 +--
> > drivers/gpu/drm/rcar-du/rcar_du_kms.c | 22 ++++++++++++
> > 6 files changed, 47 insertions(+), 39 deletions(-)
>
> +8 ... It's a good job you bought -13 lines in the previous patch ;)
>
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> > b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index 90dacab67be5..40b7f17159b0
> > 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> > @@ -22,6 +22,7 @@
> >
> > #include "rcar_du_crtc.h"
> > #include "rcar_du_drv.h"
> > +#include "rcar_du_encoder.h"
> > #include "rcar_du_kms.h"
> > #include "rcar_du_plane.h"
> > #include "rcar_du_regs.h"
> > @@ -316,26 +317,6 @@ static void rcar_du_crtc_set_display_timing(struct
> > rcar_du_crtc *rcrtc)
> > rcar_du_crtc_write(rcrtc, DEWR, mode->hdisplay);
> > }
> >
> > -void rcar_du_crtc_route_output(struct drm_crtc *crtc,
> > - enum rcar_du_output output)
> > -{
> > - struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
> > - struct rcar_du_device *rcdu = rcrtc->group->dev;
> > -
> > - /*
> > - * Store the route from the CRTC output to the DU output. The DU will
be
> > - * configured when starting the CRTC.
> > - */
> > - rcrtc->outputs |= BIT(output);
> > -
> > - /*
> > - * Store RGB routing to DPAD0, the hardware will be configured when
> > - * starting the CRTC.
> > - */
> > - if (output == RCAR_DU_OUTPUT_DPAD0)
> > - rcdu->dpad0_source = rcrtc->index;
> > -}
> > -
> > static unsigned int plane_zpos(struct rcar_du_plane *plane)
> > {
> > return plane->plane.state->normalized_zpos;
> > @@ -655,6 +636,24 @@ static void rcar_du_crtc_stop(struct rcar_du_crtc
> > *rcrtc)
> > * CRTC Functions
> > */
> >
> > +static int rcar_du_crtc_atomic_check(struct drm_crtc *crtc,
> > + struct drm_crtc_state *state)
> > +{
> > + struct rcar_du_crtc_state *rstate = to_rcar_crtc_state(state);
> > + struct drm_encoder *encoder;
> > +
> > + /* Store the routes from the CRTC output to the DU outputs. */
> > + rstate->outputs = 0;
> > +
> > + drm_for_each_encoder_mask(encoder, crtc->dev, state->encoder_mask) {
> > + struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
> > +
> > + rstate->outputs |= BIT(renc->output);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static void rcar_du_crtc_atomic_enable(struct drm_crtc *crtc,
> > struct drm_crtc_state *old_state)
> > {
> > @@ -678,8 +677,6 @@ static void rcar_du_crtc_atomic_disable(struct
> > drm_crtc *crtc,
> > crtc->state->event = NULL;
> > }
> > spin_unlock_irq(&crtc->dev->event_lock);
> > -
> > - rcrtc->outputs = 0;
> > }
> >
> > static void rcar_du_crtc_atomic_begin(struct drm_crtc *crtc,
> > @@ -755,6 +752,7 @@ enum drm_mode_status rcar_du_crtc_mode_valid(struct
> > drm_crtc *crtc,
> > }
> >
> > static const struct drm_crtc_helper_funcs crtc_helper_funcs = {
> > + .atomic_check = rcar_du_crtc_atomic_check,
> > .atomic_begin = rcar_du_crtc_atomic_begin,
> > .atomic_flush = rcar_du_crtc_atomic_flush,
> > .atomic_enable = rcar_du_crtc_atomic_enable,
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> > b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h index 59ac6e7d22c9..ec47f164e69b
> > 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> > @@ -37,7 +37,6 @@ struct rcar_du_vsp;
> > * @vblank_lock: protects vblank_wait and vblank_count
> > * @vblank_wait: wait queue used to signal vertical blanking
> > * @vblank_count: number of vertical blanking interrupts to wait for
> > - * @outputs: bitmask of the outputs (enum rcar_du_output) driven by this
> > CRTC
> > * @group: CRTC group this CRTC belongs to
> > * @vsp: VSP feeding video to this CRTC
> > * @vsp_pipe: index of the VSP pipeline feeding video to this CRTC
> > @@ -61,8 +60,6 @@ struct rcar_du_crtc {
> > wait_queue_head_t vblank_wait;
> > unsigned int vblank_count;
> >
> > - unsigned int outputs;
> > -
> > struct rcar_du_group *group;
> > struct rcar_du_vsp *vsp;
> > unsigned int vsp_pipe;
> >
> > @@ -77,11 +74,13 @@ struct rcar_du_crtc {
> > * struct rcar_du_crtc_state - Driver-specific CRTC state
> > * @state: base DRM CRTC state
> > * @crc: CRC computation configuration
> > + * @outputs: bitmask of the outputs (enum rcar_du_output) driven by this
> > CRTC
> > */
> > struct rcar_du_crtc_state {
> struct drm_crtc_state state;
> > struct vsp1_du_crc_config crc;
> > + unsigned int outputs;
> > };
> >
> > #define to_rcar_crtc_state(s) container_of(s, struct rcar_du_crtc_state,
> > state)
> > @@ -102,8 +101,6 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp,
> > unsigned int swindex,
> > void rcar_du_crtc_suspend(struct rcar_du_crtc *rcrtc);
> > void rcar_du_crtc_resume(struct rcar_du_crtc *rcrtc);
> >
> > -void rcar_du_crtc_route_output(struct drm_crtc *crtc,
> > - enum rcar_du_output output);
> > void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc);
> >
> > void rcar_du_crtc_dsysr_clr_set(struct rcar_du_crtc *rcrtc, u32 clr, u32
> > set);
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> > b/drivers/gpu/drm/rcar-du/rcar_du_drv.h index 8ef9165957cb..8b47b8546fc8
> > 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> > @@ -90,6 +90,7 @@ struct rcar_du_device {
> > } props;
> >
> > unsigned int dpad0_source;
> > + unsigned int dpad1_source;
> > unsigned int vspd1_sink;
> > };
> >
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> > b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c index
> > 1877764bd6d9..a123c28ea6ed 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> > @@ -22,17 +22,7 @@
> > * Encoder
> > */
> >
> > -static void rcar_du_encoder_mode_set(struct drm_encoder *encoder,
> > - struct drm_crtc_state *crtc_state,
> > - struct drm_connector_state *conn_state)
> > -{
> > - struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
> > -
> > - rcar_du_crtc_route_output(crtc_state->crtc, renc->output);
> > -}
> > -
> > static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
> > - .atomic_mode_set = rcar_du_encoder_mode_set,
> > };
> >
> > static const struct drm_encoder_funcs encoder_funcs = {
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c
> > b/drivers/gpu/drm/rcar-du/rcar_du_group.c index
> > 3366cda6086c..7e440f61977f 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
> > @@ -289,7 +289,7 @@ int rcar_du_set_dpad0_vsp1_routing(struct
> > rcar_du_device *rcdu)
> > int rcar_du_group_set_routing(struct rcar_du_group *rgrp)
> > {
> >
> > - struct rcar_du_crtc *crtc0 = &rgrp->dev->crtcs[rgrp->index * 2];
> > + struct rcar_du_device *rcdu = rgrp->dev;
> > u32 dorcr = rcar_du_group_read(rgrp, DORCR);
> >
> > dorcr &= ~(DORCR_PG2T | DORCR_DK2S | DORCR_PG2D_MASK);
> > @@ -299,7 +299,7 @@ int rcar_du_group_set_routing(struct rcar_du_group
> > *rgrp)
> > * CRTC 1 in all other cases to avoid cloning CRTC 0 to DPAD0 and DPAD1
> > * by default.
> > */
> > - if (crtc0->outputs & BIT(RCAR_DU_OUTPUT_DPAD1))
> > + if (rcdu->dpad1_source == rgrp->index * 2)
>
> The magic of getting (rgrp->index * 2) is a little bit ... magic ...
>
> The what is happening ( ({0,1} => {0,2}) ) is clear - but not the why.
>
> This happens a bit throughout as a means to convert from CRTC to Group
> indexes, and back. But it could be clearer with a helper.
> (not in this patch)
I agree. Let's see what happens first, a helper function or a complete rewrite
of group handling based on atomic states :-)
> > dorcr |= DORCR_PG2D_DS1;
> > else
> > dorcr |= DORCR_PG2T | DORCR_DK2S | DORCR_PG2D_DS2;
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> > b/drivers/gpu/drm/rcar-du/rcar_du_kms.c index fe6f65c94eef..bd3c2c5ea66f
> > 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> > @@ -285,6 +285,28 @@ static int rcar_du_atomic_check(struct drm_device
> > *dev,
> > static void rcar_du_atomic_commit_tail(struct drm_atomic_state
> > *old_state)
> > {
> > struct drm_device *dev = old_state->dev;
> > + struct rcar_du_device *rcdu = dev->dev_private;
> > + struct drm_crtc_state *crtc_state;
> > + struct drm_crtc *crtc;
> > + unsigned int i;
> > +
> > + /*
> > + * Store RGB routing to DPAD0 and DPAD1, the hardware will be
configured
> > + * when starting the CRTCs.
> > + */
> > + rcdu->dpad1_source = -1;
>
> Why do we initialise dpad1_source but not dpad0_source?
>
> Are we *guaranteed* to always have RCAR_DU_OUTPUT_DPAD0 set in one of
> the rcrtc_state->outputs ?
>
> If so - then this isn't an issue.
No, there's no guarantee, but it's still not an issue :-) If none of the CRTCs
in this commit output to DPAD0, the value of rcdu->dpad0_source will remain
unchanged, which is what we want.
For DPAD1 the situation is a bit different. The only R-Car SoCs to have DPAD1
are H1, V2H and E2, and they all have fixed output routing (DU0 to DPAD0 and
DU1 to DPAD1). There's however a way to route the output of the composer
inside DU0 to the DU1 output, and vice-versa. The DU driver uses this feature
to configure the routing of the DPAD1 on H1 only (I don't remember the
historical reason, or perhaps the historical mistake). We need to only route
DU0 to DPAD1 when explicitly requested (as explained in
rcar_du_group_set_routing()) and DU1 to DPAD1 in all other cases. Initializing
dpad1_source to -1 will ensure that.
The group code really needs to be rewritten to use atomic states (and I wonder
whether the DU0 -> DPAD1 routing should be kept).
> > +
> > + for_each_new_crtc_in_state(old_state, crtc, crtc_state, i) {
> > + struct rcar_du_crtc_state *rcrtc_state =
> > + to_rcar_crtc_state(crtc_state);
> > + struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
> > +
> > + if (rcrtc_state->outputs & BIT(RCAR_DU_OUTPUT_DPAD0))
> > + rcdu->dpad0_source = rcrtc->index;
> > +
> > + if (rcrtc_state->outputs & BIT(RCAR_DU_OUTPUT_DPAD1))
> > + rcdu->dpad1_source = rcrtc->index;
> > + }
> >
> > /* Apply the atomic update. */
> > drm_atomic_helper_commit_modeset_disables(dev, old_state);
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list