[PATCH 5/6] drm/omap: Remove TFP410 and DVI connector drivers

Laurent Pinchart laurent.pinchart at ideasonboard.com
Mon Dec 10 01:06:22 UTC 2018


Those components are supported by the drm_bridge infrastructure, remove
the omapdrm-specific driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 drivers/gpu/drm/omapdrm/displays/Kconfig      |  11 -
 drivers/gpu/drm/omapdrm/displays/Makefile     |   2 -
 .../gpu/drm/omapdrm/displays/connector-dvi.c  | 292 ------------------
 .../gpu/drm/omapdrm/displays/encoder-tfp410.c | 141 ---------
 .../gpu/drm/omapdrm/dss/omapdss-boot-init.c   |   2 -
 5 files changed, 448 deletions(-)
 delete mode 100644 drivers/gpu/drm/omapdrm/displays/connector-dvi.c
 delete mode 100644 drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c

diff --git a/drivers/gpu/drm/omapdrm/displays/Kconfig b/drivers/gpu/drm/omapdrm/displays/Kconfig
index a349cb61961e..38d066ac966e 100644
--- a/drivers/gpu/drm/omapdrm/displays/Kconfig
+++ b/drivers/gpu/drm/omapdrm/displays/Kconfig
@@ -6,23 +6,12 @@ config DRM_OMAP_ENCODER_OPA362
 	  Driver for OPA362 external analog TV amplifier controlled
 	  through a GPIO.
 
-config DRM_OMAP_ENCODER_TFP410
-        tristate "TFP410 DPI to DVI Encoder"
-	help
-	  Driver for TFP410 DPI to DVI encoder.
-
 config DRM_OMAP_ENCODER_TPD12S015
         tristate "TPD12S015 HDMI ESD protection and level shifter"
 	help
 	  Driver for TPD12S015, which offers HDMI ESD protection and level
 	  shifting.
 
-config DRM_OMAP_CONNECTOR_DVI
-        tristate "DVI Connector"
-	depends on I2C
-	help
-	  Driver for a generic DVI connector.
-
 config DRM_OMAP_CONNECTOR_HDMI
         tristate "HDMI Connector"
 	help
diff --git a/drivers/gpu/drm/omapdrm/displays/Makefile b/drivers/gpu/drm/omapdrm/displays/Makefile
index d99659e1381b..da1d5321ef50 100644
--- a/drivers/gpu/drm/omapdrm/displays/Makefile
+++ b/drivers/gpu/drm/omapdrm/displays/Makefile
@@ -1,8 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_DRM_OMAP_ENCODER_OPA362) += encoder-opa362.o
-obj-$(CONFIG_DRM_OMAP_ENCODER_TFP410) += encoder-tfp410.o
 obj-$(CONFIG_DRM_OMAP_ENCODER_TPD12S015) += encoder-tpd12s015.o
-obj-$(CONFIG_DRM_OMAP_CONNECTOR_DVI) += connector-dvi.o
 obj-$(CONFIG_DRM_OMAP_CONNECTOR_HDMI) += connector-hdmi.o
 obj-$(CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV) += connector-analog-tv.o
 obj-$(CONFIG_DRM_OMAP_PANEL_DPI) += panel-dpi.o
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
deleted file mode 100644
index bf5ee50ce5fe..000000000000
--- a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * Generic DVI Connector driver
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- * Author: Tomi Valkeinen <tomi.valkeinen at ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/gpio/consumer.h>
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <drm/drm_edid.h>
-
-#include "../dss/omapdss.h"
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-
-	struct i2c_adapter *i2c_adapter;
-
-	struct gpio_desc *hpd_gpio;
-
-	void (*hpd_cb)(void *cb_data, enum drm_connector_status status);
-	void *hpd_cb_data;
-	bool hpd_enabled;
-	/* mutex for hpd fields above */
-	struct mutex hpd_lock;
-};
-
-#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
-
-static int dvic_connect(struct omap_dss_device *src,
-			struct omap_dss_device *dst)
-{
-	return 0;
-}
-
-static void dvic_disconnect(struct omap_dss_device *src,
-			    struct omap_dss_device *dst)
-{
-}
-
-static int dvic_ddc_read(struct i2c_adapter *adapter,
-		unsigned char *buf, u16 count, u8 offset)
-{
-	int r, retries;
-
-	for (retries = 3; retries > 0; retries--) {
-		struct i2c_msg msgs[] = {
-			{
-				.addr   = DDC_ADDR,
-				.flags  = 0,
-				.len    = 1,
-				.buf    = &offset,
-			}, {
-				.addr   = DDC_ADDR,
-				.flags  = I2C_M_RD,
-				.len    = count,
-				.buf    = buf,
-			}
-		};
-
-		r = i2c_transfer(adapter, msgs, 2);
-		if (r == 2)
-			return 0;
-
-		if (r != -EAGAIN)
-			break;
-	}
-
-	return r < 0 ? r : -EIO;
-}
-
-static int dvic_read_edid(struct omap_dss_device *dssdev,
-		u8 *edid, int len)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	int r, l, bytes_read;
-
-	l = min(EDID_LENGTH, len);
-	r = dvic_ddc_read(ddata->i2c_adapter, edid, l, 0);
-	if (r)
-		return r;
-
-	bytes_read = l;
-
-	/* if there are extensions, read second block */
-	if (len > EDID_LENGTH && edid[0x7e] > 0) {
-		l = min(EDID_LENGTH, len - EDID_LENGTH);
-
-		r = dvic_ddc_read(ddata->i2c_adapter, edid + EDID_LENGTH,
-				l, EDID_LENGTH);
-		if (r)
-			return r;
-
-		bytes_read += l;
-	}
-
-	return bytes_read;
-}
-
-static bool dvic_detect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	unsigned char out;
-	int r;
-
-	if (ddata->hpd_gpio)
-		return gpiod_get_value_cansleep(ddata->hpd_gpio);
-
-	if (!ddata->i2c_adapter)
-		return true;
-
-	r = dvic_ddc_read(ddata->i2c_adapter, &out, 1, 0);
-
-	return r == 0;
-}
-
-static void dvic_register_hpd_cb(struct omap_dss_device *dssdev,
-				 void (*cb)(void *cb_data,
-					    enum drm_connector_status status),
-				 void *cb_data)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	mutex_lock(&ddata->hpd_lock);
-	ddata->hpd_cb = cb;
-	ddata->hpd_cb_data = cb_data;
-	mutex_unlock(&ddata->hpd_lock);
-}
-
-static void dvic_unregister_hpd_cb(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	mutex_lock(&ddata->hpd_lock);
-	ddata->hpd_cb = NULL;
-	ddata->hpd_cb_data = NULL;
-	mutex_unlock(&ddata->hpd_lock);
-}
-
-static const struct omap_dss_device_ops dvic_ops = {
-	.connect	= dvic_connect,
-	.disconnect	= dvic_disconnect,
-
-	.read_edid	= dvic_read_edid,
-	.detect		= dvic_detect,
-
-	.register_hpd_cb	= dvic_register_hpd_cb,
-	.unregister_hpd_cb	= dvic_unregister_hpd_cb,
-};
-
-static irqreturn_t dvic_hpd_isr(int irq, void *data)
-{
-	struct panel_drv_data *ddata = data;
-
-	mutex_lock(&ddata->hpd_lock);
-	if (ddata->hpd_enabled && ddata->hpd_cb) {
-		enum drm_connector_status status;
-
-		if (dvic_detect(&ddata->dssdev))
-			status = connector_status_connected;
-		else
-			status = connector_status_disconnected;
-
-		ddata->hpd_cb(ddata->hpd_cb_data, status);
-	}
-	mutex_unlock(&ddata->hpd_lock);
-
-	return IRQ_HANDLED;
-}
-
-static int dvic_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct device_node *adapter_node;
-	struct i2c_adapter *adapter;
-	struct gpio_desc *gpio;
-	int r;
-
-	gpio = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
-	if (IS_ERR(gpio)) {
-		dev_err(&pdev->dev, "failed to parse HPD gpio\n");
-		return PTR_ERR(gpio);
-	}
-
-	ddata->hpd_gpio = gpio;
-
-	mutex_init(&ddata->hpd_lock);
-
-	if (ddata->hpd_gpio) {
-		r = devm_request_threaded_irq(&pdev->dev,
-			gpiod_to_irq(ddata->hpd_gpio), NULL, dvic_hpd_isr,
-			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-			"DVI HPD", ddata);
-		if (r)
-			return r;
-	}
-
-	adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0);
-	if (adapter_node) {
-		adapter = of_get_i2c_adapter_by_node(adapter_node);
-		of_node_put(adapter_node);
-		if (adapter == NULL) {
-			dev_err(&pdev->dev, "failed to parse ddc-i2c-bus\n");
-			return -EPROBE_DEFER;
-		}
-
-		ddata->i2c_adapter = adapter;
-	}
-
-	return 0;
-}
-
-static int dvic_probe(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, ddata);
-
-	r = dvic_probe_of(pdev);
-	if (r)
-		return r;
-
-	dssdev = &ddata->dssdev;
-	dssdev->ops = &dvic_ops;
-	dssdev->dev = &pdev->dev;
-	dssdev->type = OMAP_DISPLAY_TYPE_DVI;
-	dssdev->owner = THIS_MODULE;
-	dssdev->of_ports = BIT(0);
-
-	if (ddata->hpd_gpio)
-		dssdev->ops_flags |= OMAP_DSS_DEVICE_OP_DETECT
-				  |  OMAP_DSS_DEVICE_OP_HPD;
-	if (ddata->i2c_adapter)
-		dssdev->ops_flags |= OMAP_DSS_DEVICE_OP_DETECT
-				  |  OMAP_DSS_DEVICE_OP_EDID;
-
-	omapdss_display_init(dssdev);
-	omapdss_device_register(dssdev);
-
-	return 0;
-}
-
-static int __exit dvic_remove(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-
-	omapdss_device_unregister(&ddata->dssdev);
-
-	i2c_put_adapter(ddata->i2c_adapter);
-
-	mutex_destroy(&ddata->hpd_lock);
-
-	return 0;
-}
-
-static const struct of_device_id dvic_of_match[] = {
-	{ .compatible = "omapdss,dvi-connector", },
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, dvic_of_match);
-
-static struct platform_driver dvi_connector_driver = {
-	.probe	= dvic_probe,
-	.remove	= __exit_p(dvic_remove),
-	.driver	= {
-		.name	= "connector-dvi",
-		.of_match_table = dvic_of_match,
-		.suppress_bind_attrs = true,
-	},
-};
-
-module_platform_driver(dvi_connector_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen at ti.com>");
-MODULE_DESCRIPTION("Generic DVI Connector driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c b/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
deleted file mode 100644
index 177b44ffdcb5..000000000000
--- a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * TFP410 DPI-to-DVI encoder driver
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- * Author: Tomi Valkeinen <tomi.valkeinen at ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/gpio/consumer.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include "../dss/omapdss.h"
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-
-	struct gpio_desc *pd_gpio;
-};
-
-#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
-
-static int tfp410_connect(struct omap_dss_device *src,
-			  struct omap_dss_device *dst)
-{
-	return omapdss_device_connect(dst->dss, dst, dst->next);
-}
-
-static void tfp410_disconnect(struct omap_dss_device *src,
-			      struct omap_dss_device *dst)
-{
-	omapdss_device_disconnect(dst, dst->next);
-}
-
-static void tfp410_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	if (ddata->pd_gpio)
-		gpiod_set_value_cansleep(ddata->pd_gpio, 0);
-}
-
-static void tfp410_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	if (ddata->pd_gpio)
-		gpiod_set_value_cansleep(ddata->pd_gpio, 0);
-}
-
-static const struct omap_dss_device_ops tfp410_ops = {
-	.connect	= tfp410_connect,
-	.disconnect	= tfp410_disconnect,
-	.enable		= tfp410_enable,
-	.disable	= tfp410_disable,
-};
-
-static int tfp410_probe(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	struct gpio_desc *gpio;
-
-	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, ddata);
-
-	/* Powerdown GPIO */
-	gpio = devm_gpiod_get_optional(&pdev->dev, "powerdown", GPIOD_OUT_HIGH);
-	if (IS_ERR(gpio)) {
-		dev_err(&pdev->dev, "failed to parse powerdown gpio\n");
-		return PTR_ERR(gpio);
-	}
-
-	ddata->pd_gpio = gpio;
-
-	dssdev = &ddata->dssdev;
-	dssdev->ops = &tfp410_ops;
-	dssdev->dev = &pdev->dev;
-	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
-	dssdev->output_type = OMAP_DISPLAY_TYPE_DVI;
-	dssdev->owner = THIS_MODULE;
-	dssdev->of_ports = BIT(1) | BIT(0);
-	dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
-			  | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
-			  | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
-
-	dssdev->next = omapdss_of_find_connected_device(pdev->dev.of_node, 1);
-	if (IS_ERR(dssdev->next)) {
-		if (PTR_ERR(dssdev->next) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "failed to find video sink\n");
-		return PTR_ERR(dssdev->next);
-	}
-
-	omapdss_device_register(dssdev);
-
-	return 0;
-}
-
-static int __exit tfp410_remove(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-
-	if (dssdev->next)
-		omapdss_device_put(dssdev->next);
-	omapdss_device_unregister(&ddata->dssdev);
-
-	tfp410_disable(dssdev);
-
-	return 0;
-}
-
-static const struct of_device_id tfp410_of_match[] = {
-	{ .compatible = "omapdss,ti,tfp410", },
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, tfp410_of_match);
-
-static struct platform_driver tfp410_driver = {
-	.probe	= tfp410_probe,
-	.remove	= __exit_p(tfp410_remove),
-	.driver	= {
-		.name	= "tfp410",
-		.of_match_table = tfp410_of_match,
-		.suppress_bind_attrs = true,
-	},
-};
-
-module_platform_driver(tfp410_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen at ti.com>");
-MODULE_DESCRIPTION("TFP410 DPI to DVI encoder driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
index 309b7b453e98..dfeaea639920 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
@@ -186,7 +186,6 @@ static const struct of_device_id omapdss_of_match[] __initconst = {
 
 static const struct of_device_id omapdss_of_fixups_whitelist[] __initconst = {
 	{ .compatible = "composite-video-connector" },
-	{ .compatible = "dvi-connector" },
 	{ .compatible = "hdmi-connector" },
 	{ .compatible = "lgphilips,lb035q02" },
 	{ .compatible = "nec,nl8048hl11" },
@@ -196,7 +195,6 @@ static const struct of_device_id omapdss_of_fixups_whitelist[] __initconst = {
 	{ .compatible = "sony,acx565akm" },
 	{ .compatible = "svideo-connector" },
 	{ .compatible = "ti,opa362" },
-	{ .compatible = "ti,tfp410" },
 	{ .compatible = "ti,tpd12s015" },
 	{ .compatible = "toppoly,td028ttec1" },
 	{ .compatible = "tpo,td028ttec1" },
-- 
Regards,

Laurent Pinchart



More information about the dri-devel mailing list