[PATCH 3/5] clk: meson: meson8b: add the GPU clock tree
Martin Blumenstingl
martin.blumenstingl at googlemail.com
Sat Dec 8 17:12:45 UTC 2018
Add the GPU clock tree on Meson8, Meson8b and Meson8m2.
The GPU clock tree on Meson8b and Meson8m2 is almost identical to the
one one GXBB:
- there's a glitch-free mux at HHI_MALI_CLK_CNTL[31]
- there are two identical parents for this mux: mali_0 and mali_1, each
with a gate, divider and mux
- the parents of mali_0_sel and mali_1_sel are identical to GXBB except
there's no GP0_PLL on these 32-bit SoCs
Meson8 is different because it does not have the glitch-free mux.
Instead if only has the mali_0 clock tree. The parents of mali_0_sel are
identical to the ones on Meson8b and Meson8m2.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
drivers/clk/meson/meson8b.c | 146 ++++++++++++++++++++++++++++++++++++
drivers/clk/meson/meson8b.h | 9 ++-
2 files changed, 154 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 0b9353d8d4fd..748552c5f6c8 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1573,6 +1573,135 @@ static struct clk_regmap meson8b_hdmi_sys = {
},
};
+/*
+ * The MALI IP is clocked by two identical clocks (mali_0 and mali_1)
+ * muxed by a glitch-free switch on Meson8b and Meson8m2. Meson8 only
+ * has mali_0 and no glitch-free mux.
+ */
+static const char * const meson8b_mali_0_1_parent_names[] = {
+ "xtal", "mpll2", "mpll1", "fclk_div7", "fclk_div4", "fclk_div3",
+ "fclk_div5"
+};
+
+static u32 meson8b_mali_0_1_mux_table[] = { 0, 2, 3, 4, 5, 6, 7 };
+
+static struct clk_regmap meson8b_mali_0_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_MALI_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 9,
+ .table = meson8b_mali_0_1_mux_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_0_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = meson8b_mali_0_1_parent_names,
+ .num_parents = ARRAY_SIZE(meson8b_mali_0_1_parent_names),
+ /*
+ * Don't propagate rate changes up because the only changeable
+ * parents are mpll1 and mpll2 but we need those for audio and
+ * RGMII (Ethernet). We don't want to change the audio or
+ * Ethernet clocks when setting the GPU frequency.
+ */
+ .flags = 0,
+ },
+};
+
+static struct clk_regmap meson8b_mali_0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_MALI_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "mali_0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_mali_0 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_MALI_CLK_CNTL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "mali_0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_mali_1_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_MALI_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 25,
+ .table = meson8b_mali_0_1_mux_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_1_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = meson8b_mali_0_1_parent_names,
+ .num_parents = ARRAY_SIZE(meson8b_mali_0_1_parent_names),
+ /*
+ * Don't propagate rate changes up because the only changeable
+ * parents are mpll1 and mpll2 but we need those for audio and
+ * RGMII (Ethernet). We don't want to change the audio or
+ * Ethernet clocks when setting the GPU frequency.
+ */
+ .flags = 0,
+ },
+};
+
+static struct clk_regmap meson8b_mali_1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_MALI_CLK_CNTL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_1_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "mali_1_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_mali_1 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_MALI_CLK_CNTL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "mali_1_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_mali = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_MALI_CLK_CNTL,
+ .mask = 1,
+ .shift = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = (const char *[]){ "mali_0", "mali_1" },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
/* Everything Else (EE) domain gates */
static MESON_GATE(meson8b_ddr, HHI_GCLK_MPEG0, 0);
@@ -1833,6 +1962,9 @@ static struct clk_hw_onecell_data meson8_hw_onecell_data = {
[CLKID_HDMI_SYS_SEL] = &meson8b_hdmi_sys_sel.hw,
[CLKID_HDMI_SYS_DIV] = &meson8b_hdmi_sys_div.hw,
[CLKID_HDMI_SYS] = &meson8b_hdmi_sys.hw,
+ [CLKID_MALI_0_SEL] = &meson8b_mali_0_sel.hw,
+ [CLKID_MALI_0_DIV] = &meson8b_mali_0_div.hw,
+ [CLKID_MALI] = &meson8b_mali_0.hw,
[CLK_NR_CLKS] = NULL,
},
.num = CLK_NR_CLKS,
@@ -2012,6 +2144,13 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
[CLKID_HDMI_SYS_SEL] = &meson8b_hdmi_sys_sel.hw,
[CLKID_HDMI_SYS_DIV] = &meson8b_hdmi_sys_div.hw,
[CLKID_HDMI_SYS] = &meson8b_hdmi_sys.hw,
+ [CLKID_MALI_0_SEL] = &meson8b_mali_0_sel.hw,
+ [CLKID_MALI_0_DIV] = &meson8b_mali_0_div.hw,
+ [CLKID_MALI_0] = &meson8b_mali_0.hw,
+ [CLKID_MALI_1_SEL] = &meson8b_mali_1_sel.hw,
+ [CLKID_MALI_1_DIV] = &meson8b_mali_1_div.hw,
+ [CLKID_MALI_1] = &meson8b_mali_1.hw,
+ [CLKID_MALI] = &meson8b_mali.hw,
[CLK_NR_CLKS] = NULL,
},
.num = CLK_NR_CLKS,
@@ -2167,6 +2306,13 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
&meson8b_hdmi_sys_sel,
&meson8b_hdmi_sys_div,
&meson8b_hdmi_sys,
+ &meson8b_mali_0_sel,
+ &meson8b_mali_0_div,
+ &meson8b_mali_0,
+ &meson8b_mali_1_sel,
+ &meson8b_mali_1_div,
+ &meson8b_mali_1,
+ &meson8b_mali,
};
static const struct meson8b_clk_reset_line {
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index 87fba739af81..f212e2304ff5 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -33,6 +33,7 @@
#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */
#define HHI_VID_DIVIDER_CNTL 0x198 /* 0x66 offset in data sheet */
#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */
+#define HHI_MALI_CLK_CNTL 0x1b0 /* 0x6c offset in data sheet */
#define HHI_HDMI_CLK_CNTL 0x1cc /* 0x73 offset in data sheet */
#define HHI_NAND_CLK_CNTL 0x25c /* 0x97 offset in data sheet */
#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */
@@ -139,8 +140,14 @@
#define CLKID_HDMI_SYS_SEL 172
#define CLKID_HDMI_SYS_DIV 173
#define CLKID_HDMI_SYS 174
+#define CLKID_MALI_0_SEL 175
+#define CLKID_MALI_0_DIV 176
+#define CLKID_MALI_0 177
+#define CLKID_MALI_1_SEL 178
+#define CLKID_MALI_1_DIV 179
+#define CLKID_MALI_1 180
-#define CLK_NR_CLKS 175
+#define CLK_NR_CLKS 181
/*
* include the CLKID and RESETID that have
--
2.19.2
More information about the dri-devel
mailing list