[PATCH v2 11/12] drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel

Jagan Teki jagan at amarulasolutions.com
Mon Dec 10 16:12:38 UTC 2018


Hi Thierry and David,

On Fri, Nov 16, 2018 at 10:10 PM Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel.
>
> Add panel driver for it.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>  MAINTAINERS                                   |   6 +
>  drivers/gpu/drm/panel/Kconfig                 |   9 +
>  drivers/gpu/drm/panel/Makefile                |   1 +
>  .../drm/panel/panel-feiyang-fy07024di26a30d.c | 286 ++++++++++++++++++
>  4 files changed, 302 insertions(+)
>  create mode 100644 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3dac08d0b3cb..40c8bfc974f4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4620,6 +4620,12 @@ T:       git git://anongit.freedesktop.org/drm/drm-misc
>  S:     Maintained
>  F:     drivers/gpu/drm/tve200/
>
> +DRM DRIVER FOR FEIYANG FY07024DI26A30-D MIPI-DSI LCD PANELS
> +M:     Jagan Teki <jagan at amarulasolutions.com>
> +S:     Maintained
> +F:     drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
> +F:     Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
> +
>  DRM DRIVER FOR ILITEK ILI9225 PANELS
>  M:     David Lechner <david at lechnology.com>
>  S:     Maintained
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index d0d4e60f5153..bc70896fe43c 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -47,6 +47,15 @@ config DRM_PANEL_SIMPLE
>           that it can be automatically turned off when the panel goes into a
>           low power state.
>
> +config DRM_PANEL_FEIYANG_FY07024DI26A30D
> +       tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
> +       depends on OF
> +       depends on DRM_MIPI_DSI
> +       depends on BACKLIGHT_CLASS_DEVICE
> +       help
> +         Say Y if you want to enable support for panels based on the
> +         Feiyang FY07024DI26A30-D MIPI-DSI interface.
> +

Any comments on this?


More information about the dri-devel mailing list