[PATCH v5 15/17] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI

[Maxime Ripard]

On Mon, Dec 10, 2018 at 09:47:27PM +0530, Jagan Teki wrote:
> Minimum PLL used for MIPI is 500MHz, as per manual, but
> lowering the min rate by 300MHz can result proper working
> nkms divider with the help of desired dclock rate from
> panel driver.
> 
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> Acked-by: Stephen Boyd <sboyd at kernel.org>
> ---
>  drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> index 181b599dc163..b623c8150b4f 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> @@ -183,6 +183,7 @@ static struct ccu_nkm pll_mipi_clk = {
>  	.n		= _SUNXI_CCU_MULT(8, 4),
>  	.k		= _SUNXI_CCU_MULT_MIN(4, 2, 2),
>  	.m		= _SUNXI_CCU_DIV(0, 4),
> +	.min_rate	= 300000000,		/* Actual rate is 500MHz */

That comment still doesn't make any sense. Is it running at 500MHz or 300?

Also, IIRC you had a patch adding support for maximum boundaries in
your previous patch, where did it go?

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20181211/5e065b7e/attachment.sig>