[DPU PATCH] drm/msm/dpu: Clean up dpu hw interrupts

[Jayant Shekhar]

Remove unused functions and macros from dpu hw interrupts
file.

Signed-off-by: Jayant Shekhar <jshekhar at codeaurora.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 30 --------------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 34 -----------------------
 2 files changed, 64 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
index c0b7f00..0f70cee 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
@@ -170,10 +170,6 @@
 /**
  * AD4 interrupt status bit definitions
  */
-#define DPU_INTR_BRIGHTPR_UPDATED BIT(4)
-#define DPU_INTR_DARKENH_UPDATED BIT(3)
-#define DPU_INTR_STREN_OUTROI_UPDATED BIT(2)
-#define DPU_INTR_STREN_INROI_UPDATED BIT(1)
 #define DPU_INTR_BACKLIGHT_UPDATED BIT(0)
 /**
  * struct dpu_intr_reg - array of DPU register sets
@@ -782,18 +778,6 @@ static int dpu_hw_intr_irqidx_lookup(enum dpu_intr_type intr_type,
 	return -EINVAL;
 }
 
-static void dpu_hw_intr_set_mask(struct dpu_hw_intr *intr, uint32_t reg_off,
-		uint32_t mask)
-{
-	if (!intr)
-		return;
-
-	DPU_REG_WRITE(&intr->hw, reg_off, mask);
-
-	/* ensure register writes go through */
-	wmb();
-}
-
 static void dpu_hw_intr_dispatch_irq(struct dpu_hw_intr *intr,
 		void (*cbfunc)(void *, int),
 		void *arg)
@@ -1004,18 +988,6 @@ static int dpu_hw_intr_disable_irqs(struct dpu_hw_intr *intr)
 	return 0;
 }
 
-static int dpu_hw_intr_get_valid_interrupts(struct dpu_hw_intr *intr,
-		uint32_t *mask)
-{
-	if (!intr || !mask)
-		return -EINVAL;
-
-	*mask = IRQ_SOURCE_MDP | IRQ_SOURCE_DSI0 | IRQ_SOURCE_DSI1
-		| IRQ_SOURCE_HDMI | IRQ_SOURCE_EDP;
-
-	return 0;
-}
-
 static void dpu_hw_intr_get_interrupt_statuses(struct dpu_hw_intr *intr)
 {
 	int i;
@@ -1113,14 +1085,12 @@ static u32 dpu_hw_intr_get_interrupt_status(struct dpu_hw_intr *intr,
 
 static void __setup_intr_ops(struct dpu_hw_intr_ops *ops)
 {
-	ops->set_mask = dpu_hw_intr_set_mask;
 	ops->irq_idx_lookup = dpu_hw_intr_irqidx_lookup;
 	ops->enable_irq = dpu_hw_intr_enable_irq;
 	ops->disable_irq = dpu_hw_intr_disable_irq;
 	ops->dispatch_irqs = dpu_hw_intr_dispatch_irq;
 	ops->clear_all_irqs = dpu_hw_intr_clear_irqs;
 	ops->disable_all_irqs = dpu_hw_intr_disable_irqs;
-	ops->get_valid_interrupts = dpu_hw_intr_get_valid_interrupts;
 	ops->get_interrupt_statuses = dpu_hw_intr_get_interrupt_statuses;
 	ops->clear_interrupt_status = dpu_hw_intr_clear_interrupt_status;
 	ops->clear_intr_status_nolock = dpu_hw_intr_clear_intr_status_nolock;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
index 61e4cba..985f873 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
@@ -20,13 +20,6 @@
 #include "dpu_hw_util.h"
 #include "dpu_hw_mdss.h"
 
-#define IRQ_SOURCE_MDP		BIT(0)
-#define IRQ_SOURCE_DSI0		BIT(4)
-#define IRQ_SOURCE_DSI1		BIT(5)
-#define IRQ_SOURCE_HDMI		BIT(8)
-#define IRQ_SOURCE_EDP		BIT(12)
-#define IRQ_SOURCE_MHL		BIT(16)
-
 /**
  * dpu_intr_type - HW Interrupt Type
  * @DPU_IRQ_TYPE_WB_ROT_COMP:		WB rotator done
@@ -96,18 +89,6 @@ enum dpu_intr_type {
  */
 struct dpu_hw_intr_ops {
 	/**
-	 * set_mask - Programs the given interrupt register with the
-	 *            given interrupt mask. Register value will get overwritten.
-	 * @intr:	HW interrupt handle
-	 * @reg_off:	MDSS HW register offset
-	 * @irqmask:	IRQ mask value
-	 */
-	void (*set_mask)(
-			struct dpu_hw_intr *intr,
-			uint32_t reg,
-			uint32_t irqmask);
-
-	/**
 	 * irq_idx_lookup - Lookup IRQ index on the HW interrupt type
 	 *                 Used for all irq related ops
 	 * @intr_type:		Interrupt type defined in dpu_intr_type
@@ -206,21 +187,6 @@ struct dpu_hw_intr_ops {
 			struct dpu_hw_intr *intr,
 			int irq_idx,
 			bool clear);
-
-	/**
-	 * get_valid_interrupts - Gets a mask of all valid interrupt sources
-	 *                        within DPU. These are actually status bits
-	 *                        within interrupt registers that specify the
-	 *                        source of the interrupt in IRQs. For example,
-	 *                        valid interrupt sources can be MDP, DSI,
-	 *                        HDMI etc.
-	 * @intr:	HW interrupt handle
-	 * @mask:	Returning the interrupt source MASK
-	 * @return:	0 for success, otherwise failure
-	 */
-	int (*get_valid_interrupts)(
-			struct dpu_hw_intr *intr,
-			uint32_t *mask);
 };
 
 /**
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project