[RFC v3 AFBC 04/12] drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier
Liviu Dudau
Liviu.Dudau at arm.com
Mon Dec 17 14:01:09 UTC 2018
On Fri, Dec 14, 2018 at 01:45:13PM +0000, Ayan Halder wrote:
> On Tue, Dec 04, 2018 at 04:50:51PM +0000, Liviu Dudau wrote:
>
> Hi Liviu,
>
> Please let me know if you agree with my comments. Then I will send a
> v4 patch for this.
> > On Mon, Dec 03, 2018 at 11:31:58AM +0000, Ayan Halder wrote:
> > > Added the AFBC decoder registers for DP500 , DP550 and DP650.
> > > These registers control the processing of AFBC buffers. It controls various
> > > features like AFBC decoder enable, lossless transformation and block split
> > > as well as setting of the left, right, top and bottom cropping of AFBC buffers
> > > (in number of pixels).
> > > All the layers (except DE_SMART) support framebuffers with AFBC modifiers.
> > > One needs to set the pixel values of the top, left, bottom and right cropping
> > > for the AFBC framebuffer.
> > > Cropping an AFBC framebuffer is controlled by the AFBC crop registers.
> > > In that case, the layer input size registers should be configured with
> > > framebuffer's dimensions and not with drm_plane_state source width/height
> > > values (which is used for non AFBC framebuffer to denote cropping).
> > >
> > > Changes from v1:
> > > - Removed the "if (fb->modifier)" check from malidp_de_plane_update()
> > > and added it in malidp_de_set_plane_afbc(). This will consolidate all the
> > > AFBC specific register configurations in a single function ie
> > > malidp_de_set_plane_afbc().
> > >
> > > Changes from v2:
> > > - For AFBC framebuffer, layer input size register should be set to framebuffer's
> > > width and height
> > >
> > > Signed-off-by: Ayan Kumar Halder <ayan.halder at arm.com>
> > > ---
> > > drivers/gpu/drm/arm/malidp_hw.c | 25 +++++----
> > > drivers/gpu/drm/arm/malidp_hw.h | 2 +
> > > drivers/gpu/drm/arm/malidp_planes.c | 109 +++++++++++++++++++++++++++++++-----
> > > drivers/gpu/drm/arm/malidp_regs.h | 20 +++++++
> > > 4 files changed, 130 insertions(+), 26 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/arm/malidp_hw.c b/drivers/gpu/drm/arm/malidp_hw.c
> > > index b9bed11..87b7b12 100644
> > > --- a/drivers/gpu/drm/arm/malidp_hw.c
> > > +++ b/drivers/gpu/drm/arm/malidp_hw.c
> > > @@ -94,11 +94,12 @@ static const struct malidp_layer malidp500_layers[] = {
> > > * yuv2rgb matrix offset, mmu control register offset, rotation_features
> > > */
> > > { DE_VIDEO1, MALIDP500_DE_LV_BASE, MALIDP500_DE_LV_PTR_BASE,
> > > - MALIDP_DE_LV_STRIDE0, MALIDP500_LV_YUV2RGB, 0, ROTATE_ANY },
> > > + MALIDP_DE_LV_STRIDE0, MALIDP500_LV_YUV2RGB, 0, ROTATE_ANY,
> > > + MALIDP500_DE_LV_AD_CTRL },
> > > { DE_GRAPHICS1, MALIDP500_DE_LG1_BASE, MALIDP500_DE_LG1_PTR_BASE,
> > > - MALIDP_DE_LG_STRIDE, 0, 0, ROTATE_ANY },
> > > + MALIDP_DE_LG_STRIDE, 0, 0, ROTATE_ANY, MALIDP500_DE_LG1_AD_CTRL },
> > > { DE_GRAPHICS2, MALIDP500_DE_LG2_BASE, MALIDP500_DE_LG2_PTR_BASE,
> > > - MALIDP_DE_LG_STRIDE, 0, 0, ROTATE_ANY },
> > > + MALIDP_DE_LG_STRIDE, 0, 0, ROTATE_ANY, MALIDP500_DE_LG2_AD_CTRL },
> > > };
> > >
> > > static const struct malidp_layer malidp550_layers[] = {
> > > @@ -106,13 +107,15 @@ static const struct malidp_layer malidp550_layers[] = {
> > > * yuv2rgb matrix offset, mmu control register offset, rotation_features
> > > */
> > > { DE_VIDEO1, MALIDP550_DE_LV1_BASE, MALIDP550_DE_LV1_PTR_BASE,
> > > - MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB, 0, ROTATE_ANY },
> > > + MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB, 0, ROTATE_ANY,
> > > + MALIDP550_DE_LV1_AD_CTRL },
> > > { DE_GRAPHICS1, MALIDP550_DE_LG_BASE, MALIDP550_DE_LG_PTR_BASE,
> > > - MALIDP_DE_LG_STRIDE, 0, 0, ROTATE_ANY },
> > > + MALIDP_DE_LG_STRIDE, 0, 0, ROTATE_ANY, MALIDP550_DE_LG_AD_CTRL },
> > > { DE_VIDEO2, MALIDP550_DE_LV2_BASE, MALIDP550_DE_LV2_PTR_BASE,
> > > - MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB, 0, ROTATE_ANY },
> > > + MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB, 0, ROTATE_ANY,
> > > + MALIDP550_DE_LV2_AD_CTRL },
> > > { DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE,
> > > - MALIDP550_DE_LS_R1_STRIDE, 0, 0, ROTATE_NONE },
> > > + MALIDP550_DE_LS_R1_STRIDE, 0, 0, ROTATE_NONE, 0 },
> > > };
> > >
> > > static const struct malidp_layer malidp650_layers[] = {
> > > @@ -122,16 +125,16 @@ static const struct malidp_layer malidp650_layers[] = {
> > > */
> > > { DE_VIDEO1, MALIDP550_DE_LV1_BASE, MALIDP550_DE_LV1_PTR_BASE,
> > > MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB,
> > > - MALIDP650_DE_LV_MMU_CTRL, ROTATE_ANY },
> > > + MALIDP650_DE_LV_MMU_CTRL, ROTATE_ANY, MALIDP550_DE_LV1_AD_CTRL },
> > > { DE_GRAPHICS1, MALIDP550_DE_LG_BASE, MALIDP550_DE_LG_PTR_BASE,
> > > MALIDP_DE_LG_STRIDE, 0, MALIDP650_DE_LG_MMU_CTRL,
> > > - ROTATE_COMPRESSED },
> > > + ROTATE_COMPRESSED, MALIDP550_DE_LG_AD_CTRL },
> > > { DE_VIDEO2, MALIDP550_DE_LV2_BASE, MALIDP550_DE_LV2_PTR_BASE,
> > > MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB,
> > > - MALIDP650_DE_LV_MMU_CTRL, ROTATE_ANY },
> > > + MALIDP650_DE_LV_MMU_CTRL, ROTATE_ANY, MALIDP550_DE_LV2_AD_CTRL },
> > > { DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE,
> > > MALIDP550_DE_LS_R1_STRIDE, 0, MALIDP650_DE_LS_MMU_CTRL,
> > > - ROTATE_NONE },
> > > + ROTATE_NONE, 0 },
> > > };
> > >
> > > #define SE_N_SCALING_COEFFS 96
> > > diff --git a/drivers/gpu/drm/arm/malidp_hw.h b/drivers/gpu/drm/arm/malidp_hw.h
> > > index 40155e2..651558f 100644
> > > --- a/drivers/gpu/drm/arm/malidp_hw.h
> > > +++ b/drivers/gpu/drm/arm/malidp_hw.h
> > > @@ -70,6 +70,8 @@ struct malidp_layer {
> > > s16 yuv2rgb_offset; /* offset to the YUV->RGB matrix entries */
> > > u16 mmu_ctrl_offset; /* offset to the MMU control register */
> > > enum rotation_features rot; /* type of rotation supported */
> > > + /* address offset for the AFBC decoder registers */
> > > + u16 afbc_decoder_offset;
> > > };
> > >
> > > enum malidp_scaling_coeff_set {
> > > diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c
> > > index c9a6d3e..cd60f73 100644
> > > --- a/drivers/gpu/drm/arm/malidp_planes.c
> > > +++ b/drivers/gpu/drm/arm/malidp_planes.c
> > > @@ -592,6 +592,80 @@ static void malidp_de_set_mmu_control(struct malidp_plane *mp,
> > > mp->layer->base + mp->layer->mmu_ctrl_offset);
> > > }
> > >
> > > +static void malidp_set_plane_base_addr(struct drm_framebuffer *fb,
> > > + struct malidp_plane *mp,
> > > + int plane_index)
> > > +{
> > > + dma_addr_t paddr;
> > > + u16 ptr;
> > > + struct drm_plane *plane = &mp->base;
> > > + bool afbc = fb->modifier ? true : false;
> > > +
> > > + ptr = mp->layer->ptr + (plane_index << 4);
> > > +
> > > + /*
> > > + * For AFBC buffers, cropping is handled by AFBC decoder rather than
> > > + * pointer manipulation.
> > > + */
> >
> > I think this comment needs to go in malidp_de_plane_update, not in this function.
> > This function only updates the plane's base address.
> >
> I will reword the comment like this if it sounds sane :-
>
> drm_fb_cma_get_gem_addr() alters the physical base address of the framebuffer
> as per the plane's src_x, src_y co-ordinates (ie to take care of source cropping).
> For AFBC, this is not needed as the cropping is handled by _AD_CROP_H
> and _AD_CROP_V registers.
Yeah, that sounds more in line with what the code does.
>
> > > + if (!afbc) {
> > > + paddr = drm_fb_cma_get_gem_addr(fb, plane->state,
> > > + plane_index);
> > > + } else {
> > > + struct drm_gem_cma_object *obj;
> > > +
> > > + obj = drm_fb_cma_get_gem_obj(fb, plane_index);
> > > +
> > > + if (WARN_ON(!obj))
> > > + return;
> > > + paddr = obj->paddr;
> > > + }
> > > +
> > > + malidp_hw_write(mp->hwdev, lower_32_bits(paddr), ptr);
> > > + malidp_hw_write(mp->hwdev, upper_32_bits(paddr), ptr + 4);
> > > +}
> > > +
> > > +static void malidp_de_set_plane_afbc(struct drm_plane *plane)
> > > +{
> > > + struct malidp_plane *mp;
> > > + u32 src_w, src_h, val = 0, src_x, src_y;
> > > + struct drm_framebuffer *fb = plane->state->fb;
> > > +
> > > + mp = to_malidp_plane(plane);
> > > +
> > > + /* no afbc_decoder_offset means AFBC is not supported on this plane */
> > > + if (!mp->layer->afbc_decoder_offset)
> > > + return;
> > > +
> > > + if (!fb->modifier) {
> > > + malidp_hw_write(mp->hwdev, 0, mp->layer->afbc_decoder_offset);
> > > + return;
> > > + }
> > > +
> > > + /* convert src values from Q16 fixed point to integer */
> > > + src_w = plane->state->src_w >> 16;
> > > + src_h = plane->state->src_h >> 16;
> > > + src_x = plane->state->src_x >> 16;
> > > + src_y = plane->state->src_y >> 16;
> > > +
> > > + val = ((fb->width - (src_x + src_w)) << MALIDP_AD_CROP_RIGHT_OFFSET) |
> > > + src_x;
> > > + malidp_hw_write(mp->hwdev, val,
> > > + mp->layer->afbc_decoder_offset + MALIDP_AD_CROP_H);
> > > +
> > > + val = ((fb->height - (src_y + src_h)) << MALIDP_AD_CROP_BOTTOM_OFFSET) |
> > > + src_y;
> > > + malidp_hw_write(mp->hwdev, val,
> > > + mp->layer->afbc_decoder_offset + MALIDP_AD_CROP_V);
> > > +
> > > + val = MALIDP_AD_EN;
> > > + if (fb->modifier & AFBC_FORMAT_MOD_SPLIT)
> > > + val |= MALIDP_AD_BS;
> > > + if (fb->modifier & AFBC_FORMAT_MOD_YTR)
> > > + val |= MALIDP_AD_YTR;
> > > +
> > > + malidp_hw_write(mp->hwdev, val, mp->layer->afbc_decoder_offset);
> > > +}
> > > +
> > > static void malidp_de_plane_update(struct drm_plane *plane,
> > > struct drm_plane_state *old_state)
> > > {
> > > @@ -600,30 +674,33 @@ static void malidp_de_plane_update(struct drm_plane *plane,
> > > struct drm_plane_state *state = plane->state;
> > > u16 pixel_alpha = state->pixel_blend_mode;
> > > u8 plane_alpha = state->alpha >> 8;
> > > + bool format_has_alpha = state->fb->format->has_alpha;
> > > u32 src_w, src_h, dest_w, dest_h, val;
> > > int i;
> > > + struct drm_framebuffer *fb = plane->state->fb;
> > >
> > > mp = to_malidp_plane(plane);
> > >
> > > - /* convert src values from Q16 fixed point to integer */
> > > - src_w = state->src_w >> 16;
> > > - src_h = state->src_h >> 16;
> > > - dest_w = state->crtc_w;
> > > - dest_h = state->crtc_h;
> > > + /* For AFBC framebuffer, use the framebuffer width and height for configuring
> > > + * layer input size register.
> > > + */
> > > + if (fb->modifier) {
> > > + src_w = fb->width;
> > > + src_h = fb->height;
> > > + } else {
> > > + /* convert src values from Q16 fixed point to integer */
> > > + src_w = ms->base.src_w >> 16;
> > > + src_h = ms->base.src_h >> 16;
> > > + }
> > > + dest_w = ms->base.crtc_w;
> > > + dest_h = ms->base.crtc_h;
> >
> > These two lines above are equivalent to the last two lines you deleted. Why you need this change?
> >
> Agreed, I will remove this change.
> > >
> > > val = malidp_hw_read(mp->hwdev, mp->layer->base);
> > > val = (val & ~LAYER_FORMAT_MASK) | ms->format;
> > > malidp_hw_write(mp->hwdev, val, mp->layer->base);
> > >
> > > - for (i = 0; i < ms->n_planes; i++) {
> > > - /* calculate the offset for the layer's plane registers */
> > > - u16 ptr = mp->layer->ptr + (i << 4);
> > > - dma_addr_t fb_addr = drm_fb_cma_get_gem_addr(state->fb,
> > > - state, i);
> > > -
> > > - malidp_hw_write(mp->hwdev, lower_32_bits(fb_addr), ptr);
> > > - malidp_hw_write(mp->hwdev, upper_32_bits(fb_addr), ptr + 4);
> > > - }
> > > + for (i = 0; i < ms->n_planes; i++)
> > > + malidp_set_plane_base_addr(fb, mp, i);
> > >
> > > malidp_de_set_mmu_control(mp, ms);
> > >
> > > @@ -657,6 +734,8 @@ static void malidp_de_plane_update(struct drm_plane *plane,
> > > mp->layer->base + MALIDP550_LS_R1_IN_SIZE);
> > > }
> > >
> > > + malidp_de_set_plane_afbc(plane);
> >
> > I feel like this function call should be done only if (fb->modifier) is
> > true.
> We need to call this function even is fb->modifier = 0. Please refer
> to the following snippet in malidp_de_set_plane_afbc()
>
> if (!fb->modifier) {
> malidp_hw_write(mp->hwdev, 0, mp->layer->afbc_decoder_offset);
> return;
> }
Right, that is to reset the afbc_decoder_offset, correct? Still, it
would look a bit more obvious if the code looked like this here:
if (!fb->modifier)
malidp_hw_write(mp->hwdev, 0, mp->layer->afbc_decoder_offset);
else
malidp_de_set_plane_afbc(plane);
> I will prefer to keep all the AFBC register configuration in a single
> function.
But I agree, it is probably easier to keep them all together. Please
discard my previous comment.
Best regards,
Liviu
>
> Thanks,
> Ayan Kumar Halder
> >
> > > +
> > > /* first clear the rotation bits */
> > > val = malidp_hw_read(mp->hwdev, mp->layer->base + MALIDP_LAYER_CONTROL);
> > > val &= ~LAYER_ROT_MASK;
> > > @@ -674,7 +753,7 @@ static void malidp_de_plane_update(struct drm_plane *plane,
> > >
> > > if (state->alpha != DRM_BLEND_ALPHA_OPAQUE) {
> > > val |= LAYER_COMP_PLANE;
> > > - } else if (state->fb->format->has_alpha) {
> > > + } else if (format_has_alpha) {
> >
> > This change has nothing to do with AFBC, it should not be in this patch.
> >
> > > /* We only care about blend mode if the format has alpha */
> > > switch (pixel_alpha) {
> > > case DRM_MODE_BLEND_PREMULTI:
> > > diff --git a/drivers/gpu/drm/arm/malidp_regs.h b/drivers/gpu/drm/arm/malidp_regs.h
> > > index 7ce3e14..a0dd6e1 100644
> > > --- a/drivers/gpu/drm/arm/malidp_regs.h
> > > +++ b/drivers/gpu/drm/arm/malidp_regs.h
> > > @@ -198,10 +198,13 @@
> > > #define MALIDP500_LV_YUV2RGB ((s16)(-0xB8))
> > > #define MALIDP500_DE_LV_BASE 0x00100
> > > #define MALIDP500_DE_LV_PTR_BASE 0x00124
> > > +#define MALIDP500_DE_LV_AD_CTRL 0x00400
> > > #define MALIDP500_DE_LG1_BASE 0x00200
> > > #define MALIDP500_DE_LG1_PTR_BASE 0x0021c
> > > +#define MALIDP500_DE_LG1_AD_CTRL 0x0040c
> > > #define MALIDP500_DE_LG2_BASE 0x00300
> > > #define MALIDP500_DE_LG2_PTR_BASE 0x0031c
> > > +#define MALIDP500_DE_LG2_AD_CTRL 0x00418
> > > #define MALIDP500_SE_BASE 0x00c00
> > > #define MALIDP500_SE_CONTROL 0x00c0c
> > > #define MALIDP500_SE_MEMWRITE_OUT_SIZE 0x00c2c
> > > @@ -228,10 +231,13 @@
> > > #define MALIDP550_LV_YUV2RGB 0x00084
> > > #define MALIDP550_DE_LV1_BASE 0x00100
> > > #define MALIDP550_DE_LV1_PTR_BASE 0x00124
> > > +#define MALIDP550_DE_LV1_AD_CTRL 0x001B8
> > > #define MALIDP550_DE_LV2_BASE 0x00200
> > > #define MALIDP550_DE_LV2_PTR_BASE 0x00224
> > > +#define MALIDP550_DE_LV2_AD_CTRL 0x002B8
> > > #define MALIDP550_DE_LG_BASE 0x00300
> > > #define MALIDP550_DE_LG_PTR_BASE 0x0031c
> > > +#define MALIDP550_DE_LG_AD_CTRL 0x00330
> > > #define MALIDP550_DE_LS_BASE 0x00400
> > > #define MALIDP550_DE_LS_PTR_BASE 0x0042c
> > > #define MALIDP550_DE_PERF_BASE 0x00500
> > > @@ -258,6 +264,20 @@
> > > #define MALIDP_MMU_CTRL_PX_PS(x) (1 << (8 + (x)))
> > > #define MALIDP_MMU_CTRL_PP_NUM_REQ(x) (((x) & 0x7f) << 12)
> > >
> > > +/* AFBC register offsets relative to MALIDPXXX_DE_LX_AD_CTRL */
> > > +/* The following register offsets are common for DP500, DP550 and DP650 */
> > > +#define MALIDP_AD_CROP_H 0x4
> > > +#define MALIDP_AD_CROP_V 0x8
> > > +#define MALIDP_AD_END_PTR_LOW 0xc
> > > +#define MALIDP_AD_END_PTR_HIGH 0x10
> > > +
> > > +/* AFBC decoder Registers */
> > > +#define MALIDP_AD_EN BIT(0)
> > > +#define MALIDP_AD_YTR BIT(4)
> > > +#define MALIDP_AD_BS BIT(8)
> > > +#define MALIDP_AD_CROP_RIGHT_OFFSET 16
> > > +#define MALIDP_AD_CROP_BOTTOM_OFFSET 16
> > > +
> > > /*
> > > * Starting with DP550 the register map blocks has been standardised to the
> > > * following layout:
> > > --
> > > 2.7.4
> > >
> >
> > Best regards,
> > Liviu
> >
> >
> > --
> > ====================
> > | I would like to |
> > | fix the world, |
> > | but they're not |
> > | giving me the |
> > \ source code! /
> > ---------------
> > ??\_(???)_/??
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
More information about the dri-devel
mailing list