[PATCH 6/7] drm: meson: Delete base.id prints

[Shayenne Moura]

This patch removes base.id prints from drm_display_mode                         
objects in meson files. It removes dependency from drm_mode_object.

Signed-off-by: Shayenne Moura <shayenneluzmoura at gmail.com>
---
 drivers/gpu/drm/meson/meson_dw_hdmi.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index d8c5cc34e22e..b203560f666d 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -365,7 +365,7 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
 	unsigned int wr_clk =
 		readl_relaxed(priv->io_base + _REG(VPU_HDMI_SETTING));
 
-	DRM_DEBUG_DRIVER("%d:\"%s\"\n", mode->base.id, mode->name);
+	DRM_DEBUG_DRIVER("\"%s\"\n", mode->name);
 
 	/* Enable clocks */
 	regmap_update_bits(priv->hhi, HHI_HDMI_CLK_CNTL, 0xffff, 0x100);
@@ -555,8 +555,8 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
 	int vic = drm_match_cea_mode(mode);
 	enum drm_mode_status status;
 
-	DRM_DEBUG_DRIVER("Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n",
-		mode->base.id, mode->name, mode->vrefresh, mode->clock,
+	DRM_DEBUG_DRIVER("Modeline \"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n",
+		mode->name, mode->vrefresh, mode->clock,
 		mode->hdisplay, mode->hsync_start,
 		mode->hsync_end, mode->htotal,
 		mode->vdisplay, mode->vsync_start,
@@ -650,8 +650,7 @@ static void meson_venc_hdmi_encoder_mode_set(struct drm_encoder *encoder,
 	struct meson_drm *priv = dw_hdmi->priv;
 	int vic = drm_match_cea_mode(mode);
 
-	DRM_DEBUG_DRIVER("%d:\"%s\" vic %d\n",
-			 mode->base.id, mode->name, vic);
+	DRM_DEBUG_DRIVER("\"%s\" vic %d\n", mode->name, vic);
 
 	/* VENC + VENC-DVI Mode setup */
 	meson_venc_hdmi_mode_set(priv, vic, mode);
-- 
2.17.1