[PATCH v3 5/5] drm/bridge: lvds-encoder: add powerdown-gpios support
Peter Rosin
peda at axentia.se
Sat Dec 29 07:07:43 UTC 2018
Optionally power down the LVDS-encoder when it is not in use.
Signed-off-by: Peter Rosin <peda at axentia.se>
---
drivers/gpu/drm/bridge/lvds-encoder.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/gpu/drm/bridge/lvds-encoder.c b/drivers/gpu/drm/bridge/lvds-encoder.c
index f6770e83d49d..36d8557bc097 100644
--- a/drivers/gpu/drm/bridge/lvds-encoder.c
+++ b/drivers/gpu/drm/bridge/lvds-encoder.c
@@ -11,11 +11,13 @@
#include <drm/drm_bridge.h>
#include <drm/drm_panel.h>
+#include <linux/gpio/consumer.h>
#include <linux/of_graph.h>
struct lvds_encoder {
struct drm_bridge bridge;
struct drm_bridge *panel_bridge;
+ struct gpio_desc *powerdown_gpio;
};
static int lvds_encoder_attach(struct drm_bridge *bridge)
@@ -28,8 +30,30 @@ static int lvds_encoder_attach(struct drm_bridge *bridge)
bridge);
}
+static void lvds_encoder_enable(struct drm_bridge *bridge)
+{
+ struct lvds_encoder *lvds_encoder = container_of(bridge,
+ struct lvds_encoder,
+ bridge);
+
+ if (lvds_encoder->powerdown_gpio)
+ gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 0);
+}
+
+static void lvds_encoder_disable(struct drm_bridge *bridge)
+{
+ struct lvds_encoder *lvds_encoder = container_of(bridge,
+ struct lvds_encoder,
+ bridge);
+
+ if (lvds_encoder->powerdown_gpio)
+ gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 1);
+}
+
static struct drm_bridge_funcs funcs = {
.attach = lvds_encoder_attach,
+ .enable = lvds_encoder_enable,
+ .disable = lvds_encoder_disable,
};
static int lvds_encoder_probe(struct platform_device *pdev)
@@ -45,6 +69,16 @@ static int lvds_encoder_probe(struct platform_device *pdev)
if (!lvds_encoder)
return -ENOMEM;
+ lvds_encoder->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(lvds_encoder->powerdown_gpio)) {
+ int err = PTR_ERR(lvds_encoder->powerdown_gpio);
+
+ if (err != -EPROBE_DEFER)
+ dev_err(dev, "powerdown GPIO failure: %d\n", err);
+ return err;
+ }
+
/* Locate the panel DT node. */
port = of_graph_get_port_by_id(dev->of_node, 1);
if (!port) {
--
2.11.0
More information about the dri-devel
mailing list