[PATCH] drm: Add DPCD definitions for DP 1.4 FEC feature

[Jani Nikula]

On Wed, 14 Feb 2018, Anusha Srivatsa <anusha.srivatsa at intel.com> wrote:
> Forward Error Correction is supported on DP 1.4.
> This patch adds corresponding DPCD register definitions.
>
> v2: Add dri-devel mailing list to the CC list(Jani)
>
> v3: Change names, add missing masks (Manasi)
>
> v4: Add missing shifts to mask (Manasi)
>
> v5: Arrange the definitions in ascending order
> of the address (Jani)
>
> v6: remove unnecessary definitions. Add missing masks,
> add "/* 1.4 */" to offset definitions. (Jani)
>
> Cc: dri-devel at lists.freedesktop.org
> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> Cc: Jani Nikula <jani.nikula at linux.intel.com>
> Cc: Manasi Navare <manasi.d.navare at intel.com>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>

Pushed to drm-misc-next, thanks for the patch.

BR,
Jani.

> ---
>  include/drm/drm_dp_helper.h | 30 ++++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
>
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index c239e6e..4de97e9 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -329,6 +329,13 @@
>  # define DP_DS_12BPC		            2
>  # define DP_DS_16BPC		            3
>  
> +/* DP Forward error Correction Registers */
> +#define DP_FEC_CAPABILITY		    0x090    /* 1.4 */
> +# define DP_FEC_CAPABLE			    (1 << 0)
> +# define DP_FEC_UNCORR_BLK_ERROR_COUNT_CAP  (1 << 1)
> +# define DP_FEC_CORR_BLK_ERROR_COUNT_CAP    (1 << 2)
> +# define DP_FEC_BIT_ERROR_COUNT_CAP	    (1 << 3)
> +
>  /* link configuration */
>  #define	DP_LINK_BW_SET		            0x100
>  # define DP_LINK_RATE_TABLE		    0x00    /* eDP 1.4 */
> @@ -445,6 +452,19 @@
>  #define DP_UPSTREAM_DEVICE_DP_PWR_NEED	    0x118   /* 1.2 */
>  # define DP_PWR_NOT_NEEDED		    (1 << 0)
>  
> +#define DP_FEC_CONFIGURATION		    0x120    /* 1.4 */
> +# define DP_FEC_READY			    (1 << 0)
> +# define DP_FEC_ERR_COUNT_SEL_MASK	    (7 << 1)
> +# define DP_FEC_ERR_COUNT_DIS		    (0 << 1)
> +# define DP_FEC_UNCORR_BLK_ERROR_COUNT	    (1 << 1)
> +# define DP_FEC_CORR_BLK_ERROR_COUNT	    (2 << 1)
> +# define DP_FEC_BIT_ERROR_COUNT		    (3 << 1)
> +# define DP_FEC_LANE_SELECT_MASK	    (3 << 4)
> +# define DP_FEC_LANE_0_SELECT		    (0 << 4)
> +# define DP_FEC_LANE_1_SELECT		    (1 << 4)
> +# define DP_FEC_LANE_2_SELECT		    (2 << 4)
> +# define DP_FEC_LANE_3_SELECT		    (3 << 4)
> +
>  #define DP_AUX_FRAME_SYNC_VALUE		    0x15c   /* eDP 1.4 */
>  # define DP_AUX_FRAME_SYNC_VALID	    (1 << 0)
>  
> @@ -620,6 +640,16 @@
>  #define DP_TEST_SINK			    0x270
>  # define DP_TEST_SINK_START		    (1 << 0)
>  
> +#define DP_FEC_STATUS			    0x280    /* 1.4 */
> +# define DP_FEC_DECODE_EN_DETECTED	    (1 << 0)
> +# define DP_FEC_DECODE_DIS_DETECTED	    (1 << 1)
> +
> +#define DP_FEC_ERROR_COUNT_LSB		    0x0281    /* 1.4 */
> +
> +#define DP_FEC_ERROR_COUNT_MSB		    0x0282    /* 1.4 */
> +# define DP_FEC_ERROR_COUNT_MASK	    0x7F
> +# define DP_FEC_ERR_COUNT_VALID		    (1 << 7)
> +
>  #define DP_PAYLOAD_TABLE_UPDATE_STATUS      0x2c0   /* 1.2 MST */
>  # define DP_PAYLOAD_TABLE_UPDATED           (1 << 0)
>  # define DP_PAYLOAD_ACT_HANDLED             (1 << 1)

-- 
Jani Nikula, Intel Open Source Technology Center