[PATCH v3 4/6] drm/panel: simple: Add ability to override typical timing
Thierry Reding
thierry.reding at gmail.com
Mon Feb 19 15:25:55 UTC 2018
On Thu, Feb 08, 2018 at 12:48:51PM -0500, Sean Paul wrote:
> This patch adds the ability to override the typical display timing for a
> given panel. This is useful for devices which have timing constraints
> that do not apply across the entire display driver (eg: to avoid
> crosstalk between panel and digitizer on certain laptops). The rules are
> as follows:
>
> - panel must not specify fixed mode (since the override mode will
> either be the same as the fixed mode, or we'll be unable to
> check the bounds of the overried)
> - panel must specify at least one display_timing range which will be
> used to ensure the override mode fits within its bounds
>
> Changes in v2:
> - Parse the full display-timings node (using the native-mode) (Rob)
> Changes in v3:
> - No longer parse display-timings subnode, use panel-timing (Rob)
>
> Cc: Doug Anderson <dianders at chromium.org>
> Cc: Eric Anholt <eric at anholt.net>
> Cc: Heiko Stuebner <heiko at sntech.de>
> Cc: Jeffy Chen <jeffy.chen at rock-chips.com>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Stéphane Marchesin <marcheu at chromium.org>
> Cc: Thierry Reding <thierry.reding at gmail.com>
> Cc: devicetree at vger.kernel.org
> Cc: dri-devel at lists.freedesktop.org
> Signed-off-by: Sean Paul <seanpaul at chromium.org>
> ---
> drivers/gpu/drm/panel/panel-simple.c | 67 +++++++++++++++++++++++++++++++++++-
> 1 file changed, 66 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 5591984a392b..87488392bca1 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -34,6 +34,7 @@
> #include <drm/drm_panel.h>
>
> #include <video/display_timing.h>
> +#include <video/of_display_timing.h>
> #include <video/videomode.h>
>
> struct panel_desc {
> @@ -87,6 +88,8 @@ struct panel_simple {
> struct i2c_adapter *ddc;
>
> struct gpio_desc *enable_gpio;
> +
> + struct drm_display_mode override_mode;
> };
>
> static inline struct panel_simple *to_panel_simple(struct drm_panel *panel)
> @@ -99,11 +102,22 @@ static int panel_simple_get_fixed_modes(struct panel_simple *panel)
> struct drm_connector *connector = panel->base.connector;
> struct drm_device *drm = panel->base.drm;
> struct drm_display_mode *mode;
> + bool has_override = panel->override_mode.type;
> unsigned int i, num = 0;
>
> if (!panel->desc)
> return 0;
>
> + if (has_override) {
> + mode = drm_mode_duplicate(drm, &panel->override_mode);
> + if (mode) {
> + drm_mode_probed_add(connector, mode);
> + num++;
> + } else {
> + dev_err(drm->dev, "failed to add override mode\n");
> + }
> + }
Do we really want to continue after this? Shouldn't the override mode
simply override everything else? That is, if users do override the mode,
do we want to give them additional modes to potentially choose from?
Presumably the reason why the user had to override is because the fixed
one didn't work.
Actually, we should only ever have either the display timings specified
or a fixed mode. Anything else is rather bogus.
> +
> for (i = 0; i < panel->desc->num_timings; i++) {
> const struct display_timing *dt = &panel->desc->timings[i];
> struct videomode vm;
> @@ -120,7 +134,7 @@ static int panel_simple_get_fixed_modes(struct panel_simple *panel)
>
> mode->type |= DRM_MODE_TYPE_DRIVER;
>
> - if (panel->desc->num_timings == 1)
> + if (panel->desc->num_timings == 1 && !has_override)
> mode->type |= DRM_MODE_TYPE_PREFERRED;
>
> drm_mode_probed_add(connector, mode);
> @@ -291,10 +305,58 @@ static const struct drm_panel_funcs panel_simple_funcs = {
> .get_timings = panel_simple_get_timings,
> };
>
> +#define PANEL_SIMPLE_BOUNDS_CHECK(to_check, bounds, field) \
> + (to_check->field.typ >= bounds->field.min && \
> + to_check->field.typ <= bounds->field.max)
> +static void panel_simple_add_override_mode(struct device *dev,
> + struct panel_simple *panel,
> + const struct display_timing *ot)
> +{
> + const struct panel_desc *desc = panel->desc;
> + struct videomode vm;
> + int i;
unsigned int, please.
> +
> + if (desc->num_modes) {
> + dev_err(dev, "Reject override mode: panel has a fixed mode\n");
> + return;
> + }
> + if (!desc->num_timings) {
> + dev_err(dev, "Reject override mode: no timings specified\n");
> + return;
> + }
Perhaps these should be WARN_ON() to be annoying, but let the driver
continue with the override mode? Again, this is something that we should
catch during review (when a new compatible is added, or a new driver, we
should make sure that it always comes with a timing).
WARN_ON() is probably enough to let people know when they test that they
forgot something.
> +
> + for (i = 0; i < panel->desc->num_timings; i++) {
> + const struct display_timing *dt = &panel->desc->timings[i];
> +
> + if (!PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hactive) ||
> + !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hfront_porch) ||
> + !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hback_porch) ||
> + !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hsync_len) ||
> + !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vactive) ||
> + !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vfront_porch) ||
> + !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vback_porch) ||
> + !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vsync_len))
> + continue;
> +
> + if (ot->flags != dt->flags)
> + continue;
> +
> + videomode_from_timing(ot, &vm);
> + drm_display_mode_from_videomode(&vm, &panel->override_mode);
> + panel->override_mode.type |= DRM_MODE_TYPE_DRIVER |
> + DRM_MODE_TYPE_PREFERRED;
> + return;
> + }
> +
> + dev_err(dev, "Reject override mode: No display_timing found\n");
Perhaps something like this, to simplify the code flow:
if (!panel->override_mode.type)
dev_err(dev, ...);
Then turn the above return into a break and leave out the below return.
> + return;
> +}
> +
> static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
> {
> struct device_node *backlight, *ddc;
> struct panel_simple *panel;
> + struct display_timing dt;
> int err;
>
> panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL);
> @@ -338,6 +400,9 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
> }
> }
>
> + if (!of_get_display_timing(dev->of_node, "panel-timing", &dt))
> + panel_simple_add_override_mode(dev, panel, &dt);
Perahps "panel_simple_parse_override_mode()"? To clarify what exactly
this does. This doesn't actually "add" the mode yet, that's only done
in panel_simple_get_fixed_modes().
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20180219/e6972909/attachment.sig>
More information about the dri-devel
mailing list