[PATCH RFC v3 4/6] drm: drm_fourcc: Add new formats for Xilinx IPs

Hyun Kwon hyun.kwon at xilinx.com
Fri Feb 23 02:41:24 UTC 2018


Hi Danidel,

Thanks for the comment.

On Mon, 2018-02-19 at 06:22:56 -0800, Daniel Vetter wrote:
> On Fri, Feb 09, 2018 at 05:35:54PM -0800, Hyun Kwon wrote:
> > This patch adds new formats needed by Xilinx IP. Pixels are not
> > byte-aligned in these formats, and the drm_format_info for these
> > formats has macro-pixel information.
> > 
> > Signed-off-by: Jeffrey Mouroux <jmouroux at xilinx.com>
> > Signed-off-by: Hyun Kwon <hyun.kwon at xilinx.com>
> > ---
> > v3
> > - Update entries for changes
> > - Squash fourcc patch into this
> > v2
> > - Add detailed descriptions
> > - Remove formats with no user
> > ---
> > ---
> >  drivers/gpu/drm/drm_fourcc.c  | 2 ++
> >  include/uapi/drm/drm_fourcc.h | 8 ++++++++
> >  2 files changed, 10 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/drm_fourcc.c b/drivers/gpu/drm/drm_fourcc.c
> > index ed95de2..36bff7a 100644
> > --- a/drivers/gpu/drm/drm_fourcc.c
> > +++ b/drivers/gpu/drm/drm_fourcc.c
> > @@ -168,6 +168,8 @@ const struct drm_format_info *__drm_format_info(u32 format)
> >  		{ .format = DRM_FORMAT_NV61,		.depth = 0,  .num_planes = 2, .cpp = { 1, 2, 0 }, .hsub = 2, .vsub = 1 },
> >  		{ .format = DRM_FORMAT_NV24,		.depth = 0,  .num_planes = 2, .cpp = { 1, 2, 0 }, .hsub = 1, .vsub = 1 },
> >  		{ .format = DRM_FORMAT_NV42,		.depth = 0,  .num_planes = 2, .cpp = { 1, 2, 0 }, .hsub = 1, .vsub = 1 },
> > +		{ .format = DRM_FORMAT_XV15,		.depth = 0,  .num_planes = 2, .pixels_per_macropixel = { 3, 3, 0 }, .bytes_per_macropixel = { 4, 8, 0 }, .hsub = 2, .vsub = 2, },
> > +		{ .format = DRM_FORMAT_XV20,		.depth = 0,  .num_planes = 2, .pixels_per_macropixel = { 3, 3, 0 }, .bytes_per_macropixel = { 4, 8, 0 }, .hsub = 2, .vsub = 1, },
> 
> There's no need to set fields explicitly to 0. I think we could even do a
> separate patch to nuke all the .depth = 0, assignments.
> 
> One thing that I've realized now that your new pixel formats stick out:
> How is macropixel supposed to interact with hsub/vsub? From you example it
> looks like macropixels are applied after subsampling (i.e. a macropixel
> block of 3 pixels, but hsub = 2 means the macroblock will actually span 6
> pixels). I think the kerneldoc in the earlier patch should explain this is
> allowed, and how it's supposed to work exactly.
> 
> Also, do we have open-source userspace somewhere for this new pixel format?
> 

We have modified modetest to test these formats. The change, especially
the pattern generation part, isn't clean enough to be shared at the moment. But
I can do some clean-up and share if that helps.

Then this change (may not be the latest set) was used to prototype the support
in the gstreamer kmssink plug-in, but it's implemented by Collabora. Not sure
if the change is accessible, but I can check.

I'll address rest of your comments.

Thanks,
-hyun

> Thanks, Daniel
> 
> 
> >  		{ .format = DRM_FORMAT_YUYV,		.depth = 0,  .num_planes = 1, .cpp = { 2, 0, 0 }, .hsub = 2, .vsub = 1 },
> >  		{ .format = DRM_FORMAT_YVYU,		.depth = 0,  .num_planes = 1, .cpp = { 2, 0, 0 }, .hsub = 2, .vsub = 1 },
> >  		{ .format = DRM_FORMAT_UYVY,		.depth = 0,  .num_planes = 1, .cpp = { 2, 0, 0 }, .hsub = 2, .vsub = 1 },
> > diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
> > index e04613d..6ac5282 100644
> > --- a/include/uapi/drm/drm_fourcc.h
> > +++ b/include/uapi/drm/drm_fourcc.h
> > @@ -142,6 +142,14 @@ extern "C" {
> >  #define DRM_FORMAT_NV42		fourcc_code('N', 'V', '4', '2') /* non-subsampled Cb:Cr plane */
> >  
> >  /*
> > + * 2 plane 10 bit per component YCbCr
> > + * index 0 = Y plane, [31:0] x:Y2:Y1:Y0 2:10:10:10 little endian
> > + * index 1 = Cb:Cr plane, [63:0] x:Cb2:Cr2:Cb1:x:Cr1:Cb0:Cr0 2:10:10:10:2:10:10:10 little endian
> > + */
> > +#define DRM_FORMAT_XV15		fourcc_code('X', 'V', '1', '5') /* 2x2 subsampled Cb:Cr plane 2:10:10:10 */
> > +#define DRM_FORMAT_XV20		fourcc_code('X', 'V', '2', '0') /* 2x1 subsampled Cb:Cr plane 2:10:10:10 */
> > +
> > +/*
> >   * 3 plane YCbCr
> >   * index 0: Y plane, [7:0] Y
> >   * index 1: Cb plane, [7:0] Cb
> > -- 
> > 2.7.4
> > 
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch


More information about the dri-devel mailing list