[PATCH v1 1/2] dt-bindings/display/panel: Add support for Raydium rm68200 dsi panel

[Yannick FERTRE]

Reviewed-by: Yannick Fertré <yannick.fertre at st.com>


On 02/08/2018 03:30 PM, Philippe Cornu wrote:
> The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280
> TFT LCD panel connected using a MIPI-DSI video interface.
>
> Signed-off-by: Philippe Cornu <philippe.cornu at st.com>
> ---
>   .../bindings/display/panel/raydium,rm68200.txt     | 25 ++++++++++++++++++++++
>   1 file changed, 25 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt
> new file mode 100644
> index 000000000000..cbb79ef3bfc9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt
> @@ -0,0 +1,25 @@
> +Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel
> +
> +The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
> +panel connected using a MIPI-DSI video interface.
> +
> +Required properties:
> +  - compatible: "raydium,rm68200"
> +  - reg: the virtual channel number of a DSI peripheral
> +
> +Optional properties:
> +  - reset-gpios: a GPIO spec for the reset pin (active low).
> +  - power-supply: phandle of the regulator that provides the supply voltage.
> +  - backlight: phandle of the backlight device attached to the panel.
> +
> +Example:
> +&dsi {
> +	...
> +	panel at 0 {
> +		compatible = "raydium,rm68200";
> +		reg = <0>;
> +		reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
> +		power-supply = <&v1v8>;
> +		backlight = <&pwm_backlight>;
> +	};
> +};