[PATCH v2 04/12] drm/bridge/synopsys: dw-hdmi: Export some PHY related functions
Jernej Škrabec
jernej.skrabec at siol.net
Fri Jan 12 20:42:12 UTC 2018
Hi all,
Dne sreda, 10. januar 2018 ob 20:25:04 CET je Jernej Skrabec napisal(a):
> Parts of PHY code could be useful also for custom PHYs. For example,
> Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY
> with few additional memory mapped registers, so most of the Synopsys PHY
> related code could be reused.
>
> Functions exported here are actually not specific to Synopsys PHYs but
> to DWC HDMI controller PHY interface. This means that even if the PHY is
> completely custom, i.e. not designed by Synopsys, exported functions can
> be useful.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 44
> +++++++++++++++++++++---------- include/drm/bridge/dw_hdmi.h |
> 11 ++++++++
> 2 files changed, 41 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index
> 7ca14d7325b5..7d80f4b56683 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -1037,19 +1037,21 @@ static void dw_hdmi_phy_enable_svsret(struct dw_hdmi
> *hdmi, u8 enable) HDMI_PHY_CONF0_SVSRET_MASK);
> }
>
> -static void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
> +void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
> {
> hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
> HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET,
> HDMI_PHY_CONF0_GEN2_PDDQ_MASK);
> }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_pddq);
>
> -static void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
> +void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
> {
> hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
> HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET,
> HDMI_PHY_CONF0_GEN2_TXPWRON_MASK);
> }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_txpwron);
>
> static void dw_hdmi_phy_sel_data_en_pol(struct dw_hdmi *hdmi, u8 enable)
> {
> @@ -1065,6 +1067,22 @@ static void dw_hdmi_phy_sel_interface_control(struct
> dw_hdmi *hdmi, u8 enable) HDMI_PHY_CONF0_SELDIPIF_MASK);
> }
>
> +void dw_hdmi_phy_reset(struct dw_hdmi *hdmi)
> +{
> + /* PHY reset. The reset signal is active high on Gen2 PHYs. */
> + hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
> + hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
> +}
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_reset);
I just noticed that meson dw hdmi driver uses function with the same name,
which break compilation. Is it ok if I rename meson specific reset to
meson_dw_hdmi_phy_reset()?
Best regards,
Jernej
> +
> +void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address)
> +{
> + hdmi_phy_test_clear(hdmi, 1);
> + hdmi_writeb(hdmi, address, HDMI_PHY_I2CM_SLAVE_ADDR);
> + hdmi_phy_test_clear(hdmi, 0);
> +}
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_set_addr);
> +
> static void dw_hdmi_phy_power_off(struct dw_hdmi *hdmi)
> {
> const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
> @@ -1203,16 +1221,11 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi)
> if (phy->has_svsret)
> dw_hdmi_phy_enable_svsret(hdmi, 1);
>
> - /* PHY reset. The reset signal is active high on Gen2 PHYs. */
> - hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
> - hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
> + dw_hdmi_phy_reset(hdmi);
>
> hdmi_writeb(hdmi, HDMI_MC_HEACPHY_RST_ASSERT, HDMI_MC_HEACPHY_RST);
>
> - hdmi_phy_test_clear(hdmi, 1);
> - hdmi_writeb(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2,
> - HDMI_PHY_I2CM_SLAVE_ADDR);
> - hdmi_phy_test_clear(hdmi, 0);
> + dw_hdmi_phy_i2c_set_addr(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2);
>
> /* Write to the PHY as configured by the platform */
> if (pdata->configure_phy)
> @@ -1251,15 +1264,16 @@ static void dw_hdmi_phy_disable(struct dw_hdmi
> *hdmi, void *data) dw_hdmi_phy_power_off(hdmi);
> }
>
> -static enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> - void *data)
> +enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> + void *data)
> {
> return hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ?
> connector_status_connected : connector_status_disconnected;
> }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_read_hpd);
>
> -static void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> - bool force, bool disabled, bool rxsense)
> +void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> + bool force, bool disabled, bool rxsense)
> {
> u8 old_mask = hdmi->phy_mask;
>
> @@ -1271,8 +1285,9 @@ static void dw_hdmi_phy_update_hpd(struct dw_hdmi
> *hdmi, void *data, if (old_mask != hdmi->phy_mask)
> hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
> }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_update_hpd);
>
> -static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
> +void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
> {
> /*
> * Configure the PHY RX SENSE and HPD interrupts polarities and clear
> @@ -1291,6 +1306,7 @@ static void dw_hdmi_phy_setup_hpd(struct dw_hdmi
> *hdmi, void *data) hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD |
> HDMI_IH_PHY_STAT0_RX_SENSE), HDMI_IH_MUTE_PHY_STAT0);
> }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_setup_hpd);
>
> static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = {
> .init = dw_hdmi_phy_init,
> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> index 182f83283e24..4a35e5065f6f 100644
> --- a/include/drm/bridge/dw_hdmi.h
> +++ b/include/drm/bridge/dw_hdmi.h
> @@ -157,7 +157,18 @@ void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
> void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
>
> /* PHY configuration */
> +void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address);
> void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
> unsigned char addr);
>
> +enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> + void *data);
> +void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> + bool force, bool disabled, bool rxsense);
> +void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
> +
> +void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable);
> +void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable);
> +void dw_hdmi_phy_reset(struct dw_hdmi *hdmi);
> +
> #endif /* __IMX_HDMI_H__ */
> --
> 2.15.1
More information about the dri-devel
mailing list