[PATCH v2] drm/stm: drv: Improve data transfers

Jani Nikula jani.nikula at linux.intel.com
Tue Jan 30 15:28:57 UTC 2018


On Tue, 30 Jan 2018, Laurent Pinchart <laurent.pinchart at ideasonboard.com> wrote:
> Hi Benjamin,
>
> On Tuesday, 30 January 2018 12:51:25 EET Benjamin Gaignard wrote:
>> 2018-01-30 11:42 GMT+01:00 Philippe Cornu <philippe.cornu at st.com>:
>> > To optimize data transfers, align pitch on 128 bytes & height
>> > on 4 bytes. This optimization is not applicable on hw without MMU.
>> > 
>> > Signed-off-by: Yannick Fertre <yannick.fertre at st.com>
>> > Signed-off-by: Vincent Abriou <vincent.abriou at st.com>
>> > Signed-off-by: Philippe Cornu <philippe.cornu at st.com>
>> 
>> Applied on drm-misc-next.
>
> A 9 minutes review window is pretty small... I've been told before that I 
> should then review v1 instead of complaining about short review times for v2, 
> but in this case v2 introduces a bug that wasn't present in v1.

IMO no patch ever needs to be applied this fast. Give more eyeballs a
chance.

BR,
Jani.


>
>> > ---
>> > Changes in v2: Rename stm_dumb_create() to stm_gem_cma_dumb_create() and
>> > 
>> >   move CONFIG_MMU inside the function following comments from Benjamin
>> >   Gaignard.
>> >  
>> >  drivers/gpu/drm/stm/drv.c | 20 +++++++++++++++++++-
>> >  1 file changed, 19 insertions(+), 1 deletion(-)
>> > 
>> > diff --git a/drivers/gpu/drm/stm/drv.c b/drivers/gpu/drm/stm/drv.c
>> > index 8fe954c27fba..8bc7e8418b8d 100644
>> > --- a/drivers/gpu/drm/stm/drv.c
>> > +++ b/drivers/gpu/drm/stm/drv.c
>> > @@ -31,6 +31,24 @@ static const struct drm_mode_config_funcs
>> > drv_mode_config_funcs = {> 
>> >         .atomic_commit = drm_atomic_helper_commit,
>> >  
>> >  };
>> > 
>> > +static int stm_gem_cma_dumb_create(struct drm_file *file,
>> > +                                  struct drm_device *dev,
>> > +                                  struct drm_mode_create_dumb *args)
>> > +{
>> > +#ifdef CONFIG_MMU
>> > +       unsigned int min_pitch = DIV_ROUND_UP(args->width * args->bpp, 8);
>> > +
>> > +       /*
>> > +        * in order to optimize data transfer, pitch is aligned on
>> > +        * 128 bytes, height is aligned on 4 bytes
>> > +        */
>> > +       args->pitch = roundup(min_pitch, 128);
>> > +       args->height = roundup(args->height, 4);
>> > +#endif
>> > +
>> > +       return drm_gem_cma_dumb_create_internal(file, dev, args);
>> > +}
>> > +
>> > 
>> >  DEFINE_DRM_GEM_CMA_FOPS(drv_driver_fops);
>> >  
>> >  static struct drm_driver drv_driver = {
>> > 
>> > @@ -44,7 +62,7 @@ static struct drm_driver drv_driver = {
>> > 
>> >         .minor = 0,
>> >         .patchlevel = 0,
>> >         .fops = &drv_driver_fops,
>> > 
>> > -       .dumb_create = drm_gem_cma_dumb_create,
>> > +       .dumb_create = stm_gem_cma_dumb_create,
>> > 
>> >         .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
>> >         .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
>> >         .gem_free_object_unlocked = drm_gem_cma_free_object,
>> > 
>> > --
>> > 2.15.1

-- 
Jani Nikula, Intel Open Source Technology Center


More information about the dri-devel mailing list