[v4] drm: Add DPCD definitions for DP 1.4 FEC feature
Jani Nikula
jani.nikula at linux.intel.com
Wed Jan 31 13:39:15 UTC 2018
On Fri, 22 Dec 2017, Anusha Srivatsa <anusha.srivatsa at intel.com> wrote:
> Forward Error Correction is supported on DP 1.4.
> This patch adds corresponding DPCD register definitions.
>
> v2: Add dri-devel mailing list to the CC list(Jani)
>
> v3: Change names, add missing masks (Manasi)
>
> v4: Add missing shifts to mask (Manasi)
>
> Cc: dri-devel at lists.freedesktop.org
> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> Cc: Jani Nikula <jani.nikula at linux.intel.com>
> Cc: Manasi Navare <manasi.d.navare at intel.com>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
> Reviewed-by: Manasi Navare <manasi.d.navare at intel.com>
Anusha, when a patch obviously falls between the cracks, like here,
please ping or resend it. Sure, the maintainers/committers should take
care of it, but when that doesn't happen, please follow through with
your work.
I was going to merge this now but I'm afraid I noticed that the
definitions are out of place. Everything else is in increasing DPCD
address order, these aren't.
Please fix that.
BR,
Jani.
> ---
> include/drm/drm_dp_helper.h | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index da58a42..592e371 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -284,6 +284,36 @@
> # define DP_DSC_BITS_PER_PIXEL_1_2 0x3
> # define DP_DSC_BITS_PER_PIXEL_1 0x4
>
> +/* DP Forward error Correction Registers */
> +#define DP_FEC_CAPABILITY 0x090
> +# define DP_FEC_CAPABLE (1 << 0)
> +# define DP_FEC_UNCORR_BLK_ERROR_COUNT_CAP (1 << 1)
> +# define DP_FEC_CORR_BLK_ERROR_COUNT_CAP (1 << 2)
> +# define DP_FEC_BIT_ERROR_COUNT_CAP (1 << 3)
> +
> +#define DP_FEC_CONFIGURATION 0x120
> +# define DP_FEC_READY (1 << 0)
> +# define DP_FEC_ERR_COUNT_DIS (0 << 1)
> +# define DP_FEC_UNCORR_BLK_ERROR_COUNT (1 << 1)
> +# define DP_FEC_CORR_BLK_ERROR_COUNT (2 << 1)
> +# define DP_FEC_BIT_ERROR_COUNT (3 << 1)
> +# define DP_FEC_ERR_COUNT_SEL_MASK (0xff << 4)
> +# define DP_FEC_LANE_0_SELECT (0 << 4)
> +# define DP_FEC_LANE_1_SELECT (1 << 4)
> +# define DP_FEC_LANE_2_SELECT (2 << 4)
> +# define DP_FEC_LANE_3_SELECT (3 << 4)
> +
> +#define DP_FEC_STATUS 0x280
> +# define DP_FEC_DECODE_EN_DETECTED (1 << 0)
> +# define DP_FEC_DECODE_DIS_DETECTED (1 << 1)
> +
> +#define DP_FEC_ERROR_COUNT_LSB 0x0281
> +
> +#define DP_FEC_ERROR_COUNT_MSB 0x0282
> +# define DP_FEC_ERROR_COUNT_MASK 0x7F
> +# define DP_FEC_ERR_COUNT_SHIFT 8
> +# define DP_FEC_ERR_COUNT_VALID (1 << 7)
> +
> #define DP_PSR_SUPPORT 0x070 /* XXX 1.2? */
> # define DP_PSR_IS_SUPPORTED 1
> # define DP_PSR2_IS_SUPPORTED 2 /* eDP 1.4 */
--
Jani Nikula, Intel Open Source Technology Center
More information about the dri-devel
mailing list