[linux-sunxi] Re: [PATCH v3 23/24] ARM: dts: sun8i: r40: Add HDMI pipeline
Jernej Škrabec
jernej.skrabec at gmail.com
Mon Jul 2 21:39:24 UTC 2018
Dne nedelja, 01. julij 2018 ob 21:25:57 CEST je Jernej Škrabec napisal(a):
> Dne nedelja, 01. julij 2018 ob 17:35:28 CEST je Chen-Yu Tsai napisal(a):
> > On Sun, Jul 1, 2018 at 11:13 PM, Jernej Škrabec <jernej.skrabec at siol.net>
>
> wrote:
> > > Dne nedelja, 01. julij 2018 ob 15:52:55 CEST je Chen-Yu Tsai napisal(a):
> > >> On Sun, Jul 1, 2018 at 6:41 PM, Jernej Škrabec
> > >> <jernej.skrabec at siol.net>
> > >
> > > wrote:
> > >> > Dne četrtek, 28. junij 2018 ob 08:51:07 CEST je Chen-Yu Tsai
>
> napisal(a):
> > >> >> On Thu, Jun 28, 2018 at 1:15 PM, Jernej Škrabec
> > >> >> <jernej.skrabec at siol.net>
> > >> >
> > >> > wrote:
> > >> >> > Dne četrtek, 28. junij 2018 ob 04:50:09 CEST je Chen-Yu Tsai
> > >
> > > napisal(a):
> > >> >> >> On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec
> > >> >> >> <jernej.skrabec at siol.net>
> > >> >> >
> > >> >> > wrote:
> > >> >> >> > Add all entries needed for HDMI to function properly.
> > >> >> >> >
> > >> >> >> > Since R40 has highly configurable pipeline, both mixers and
> > >> >> >> > both
> > >> >> >> > TCON
> > >> >> >> > TVs are added. Board specific DT should then connect them
> > >> >> >> > together
> > >> >> >> > trough TCON TOP muxers to best fit the purpose of the board.
> > >> >> >> >
> > >> >> >> > Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
> > >> >> >> > ---
> > >> >> >> >
> > >> >> >> > arch/arm/boot/dts/sun8i-r40.dtsi | 269
> > >> >> >> > +++++++++++++++++++++++++++++++
> > >> >> >> > 1 file changed, 269 insertions(+)
> > >> >> >> >
> > >> >> >> > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi
> > >> >> >> > b/arch/arm/boot/dts/sun8i-r40.dtsi index
> > >> >> >> > 173dcc1652d2..a2a75fb04caf
> > >> >> >> > 100644
> > >> >> >> > --- a/arch/arm/boot/dts/sun8i-r40.dtsi
> > >> >> >> > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
> > >> >> >> > @@ -42,8 +42,11 @@
> > >> >> >> >
> > >> >> >> > */
> > >> >> >> >
> > >> >> >> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > >> >> >> >
> > >> >> >> > +#include <dt-bindings/clock/sun8i-de2.h>
> > >> >> >> >
> > >> >> >> > #include <dt-bindings/clock/sun8i-r40-ccu.h>
> > >> >> >> >
> > >> >> >> > +#include <dt-bindings/clock/sun8i-tcon-top.h>
> > >> >> >
> > >> >> > Maxime, above line breaks compilation for build robot, sorry.
> > >> >> >
> > >> >> >> > #include <dt-bindings/reset/sun8i-r40-ccu.h>
> > >> >> >> >
> > >> >> >> > +#include <dt-bindings/reset/sun8i-de2.h>
> > >> >> >> >
> > >> >> >> > / {
> > >> >> >> >
> > >> >> >> > #address-cells = <1>;
> > >> >> >> >
> > >> >> >> > @@ -99,12 +102,76 @@
> > >> >> >> >
> > >> >> >> > };
> > >> >> >> >
> > >> >> >> > };
> > >> >> >> >
> > >> >> >> > + de: display-engine {
> > >> >> >> > + compatible =
> > >> >> >> > "allwinner,sun8i-r40-display-engine",
> > >> >> >> > +
> > >> >> >> > "allwinner,sun8i-h3-display-engine";
> > >> >> >>
> > >> >> >> Given that the display pipeline looks different, they should not
> > >> >> >> be
> > >> >> >> compatible.
> > >> >> >
> > >> >> > Ok.
> > >> >> >
> > >> >> >> > + allwinner,pipelines = <&mixer0>, <&mixer1>;
> > >> >> >> > + status = "disabled";
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> >
> > >> >> >> > soc {
> > >> >> >> >
> > >> >> >> > compatible = "simple-bus";
> > >> >> >> > #address-cells = <1>;
> > >> >> >> > #size-cells = <1>;
> > >> >> >> > ranges;
> > >> >> >> >
> > >> >> >> > + display_clocks: clock at 1000000 {
> > >> >> >> > + compatible =
> > >> >> >> > "allwinner,sun8i-r40-de2-clk",
> > >> >> >> > +
> > >> >> >> > "allwinner,sun8i-h3-de2-clk";
> > >> >> >> > + reg = <0x01000000 0x100000>;
> > >> >> >> > + clocks = <&ccu CLK_DE>,
> > >> >> >> > + <&ccu CLK_BUS_DE>;
> > >> >> >> > + clock-names = "mod",
> > >> >> >> > + "bus";
> > >> >> >> > + resets = <&ccu RST_BUS_DE>;
> > >> >> >> > + #clock-cells = <1>;
> > >> >> >> > + #reset-cells = <1>;
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > + mixer0: mixer at 1100000 {
> > >> >> >> > + compatible =
> > >> >> >> > "allwinner,sun8i-r40-de2-mixer-0";
> > >> >> >> > + reg = <0x01100000 0x100000>;
> > >> >> >> > + clocks = <&display_clocks
> > >> >> >> > CLK_BUS_MIXER0>,
> > >> >> >> > + <&display_clocks CLK_MIXER0>;
> > >> >> >> > + clock-names = "bus",
> > >> >> >> > + "mod";
> > >> >> >> > + resets = <&display_clocks RST_MIXER0>;
> > >> >> >> > +
> > >> >> >> > + ports {
> > >> >> >> > + #address-cells = <1>;
> > >> >> >> > + #size-cells = <0>;
> > >> >> >> > +
> > >> >> >> > + mixer0_out: port at 1 {
> > >> >> >> > + reg = <1>;
> > >> >> >> > + mixer0_out_tcon_top:
> > >> >> >> > endpoint {
> > >> >> >> > + remote-endpoint
> > >> >> >> > =
> > >> >> >> > <&tcon_top_mixer0_in_mixer0>; +
> > >> >> >> > };
> > >> >> >> > + };
> > >> >> >> > + };
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > + mixer1: mixer at 1200000 {
> > >> >> >> > + compatible =
> > >> >> >> > "allwinner,sun8i-r40-de2-mixer-1";
> > >> >> >> > + reg = <0x01200000 0x100000>;
> > >> >> >> > + clocks = <&display_clocks
> > >> >> >> > CLK_BUS_MIXER1>,
> > >> >> >> > + <&display_clocks CLK_MIXER1>;
> > >> >> >> > + clock-names = "bus",
> > >> >> >> > + "mod";
> > >> >> >> > + resets = <&display_clocks RST_WB>;
> > >> >> >> > +
> > >> >> >> > + ports {
> > >> >> >> > + #address-cells = <1>;
> > >> >> >> > + #size-cells = <0>;
> > >> >> >> > +
> > >> >> >> > + mixer1_out: port at 1 {
> > >> >> >> > + reg = <1>;
> > >> >> >> > + mixer1_out_tcon_top:
> > >> >> >> > endpoint {
> > >> >> >> > + remote-endpoint
> > >> >> >> > =
> > >> >> >> > <&tcon_top_mixer1_in_mixer1>; +
> > >> >> >> > };
> > >> >> >> > + };
> > >> >> >> > + };
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> >
> > >> >> >> > nmi_intc: interrupt-controller at 1c00030 {
> > >> >> >> >
> > >> >> >> > compatible =
> > >> >> >> > "allwinner,sun7i-a20-sc-nmi";
> > >> >> >> > interrupt-controller;
> > >> >> >> >
> > >> >> >> > @@ -451,6 +518,163 @@
> > >> >> >> >
> > >> >> >> > #size-cells = <0>;
> > >> >> >> >
> > >> >> >> > };
> > >> >> >> >
> > >> >> >> > + tcon_top: tcon-top at 1c70000 {
> > >> >> >> > + compatible =
> > >> >> >> > "allwinner,sun8i-r40-tcon-top";
> > >> >> >> > + reg = <0x01c70000 0x1000>;
> > >> >> >> > + clocks = <&ccu CLK_BUS_TCON_TOP>,
> > >> >> >> > + <&ccu CLK_TCON_TV0>,
> > >> >> >> > + <&ccu CLK_TVE0>,
> > >> >> >> > + <&ccu CLK_TCON_TV1>,
> > >> >> >> > + <&ccu CLK_TVE1>,
> > >> >> >> > + <&ccu CLK_DSI_DPHY>;
> > >> >> >> > + clock-names = "bus",
> > >> >> >> > + "tcon-tv0",
> > >> >> >> > + "tve0",
> > >> >> >> > + "tcon-tv1",
> > >> >> >> > + "tve1",
> > >> >> >> > + "dsi";
> > >> >> >> > + clock-output-names = "tcon-top-tv0",
> > >> >> >> > + "tcon-top-tv1",
> > >> >> >> > + "tcon-top-dsi";
> > >> >> >> > + resets = <&ccu RST_BUS_TCON_TOP>;
> > >> >> >> > + #clock-cells = <1>;
> > >> >> >> > +
> > >> >> >> > + ports {
> > >> >> >> > + #address-cells = <1>;
> > >> >> >> > + #size-cells = <0>;
> > >> >> >> > +
> > >> >> >> > + tcon_top_mixer0_in: port at 0 {
> > >> >> >> > + reg = <0>;
> > >> >> >> > +
> > >> >> >> > +
> > >> >> >> > tcon_top_mixer0_in_mixer0:
> > >> >> >> > endpoint { +
> > >> >> >> > remote-endpoint = <&mixer0_out_tcon_top>; +
> > >> >> >> >
> > >> >> >> > };
> > >> >> >> >
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > + tcon_top_mixer0_out: port at 1 {
> > >> >> >> > + #address-cells = <1>;
> > >> >> >> > + #size-cells = <0>;
> > >> >> >> > + reg = <1>;
> > >> >> >> > +
> > >> >> >> > +
> > >> >> >> > tcon_top_mixer0_out_tcon_lcd0:
> > >> >> >> > endpoint at 0 { +
> > >> >> >> > reg
> > >> >> >> > =
> > >> >> >> > <0>;
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > +
> > >> >> >> > tcon_top_mixer0_out_tcon_lcd1:
> > >> >> >> > endpoint at 1 { +
> > >> >> >> > reg
> > >> >> >> > =
> > >> >> >> > <1>;
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > +
> > >> >> >> > tcon_top_mixer0_out_tcon_tv0:
> > >> >> >> > endpoint at 2 { +
> > >> >> >> > reg
> > >> >> >> > =
> > >> >> >> > <2>;
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > +
> > >> >> >> > tcon_top_mixer0_out_tcon_tv1:
> > >> >> >> > endpoint at 3 { +
> > >> >> >> > reg
> > >> >> >> > =
> > >> >> >> > <3>;
> > >> >> >> > + };
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > + tcon_top_mixer1_in: port at 2 {
> > >> >> >> > + reg = <2>;
> > >> >> >> > +
> > >> >> >> > +
> > >> >> >> > tcon_top_mixer1_in_mixer1:
> > >> >> >> > endpoint { +
> > >> >> >> > remote-endpoint = <&mixer1_out_tcon_top>; +
> > >> >> >> >
> > >> >> >> > };
> > >> >> >> >
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > + tcon_top_mixer1_out: port at 3 {
> > >> >> >> > + #address-cells = <1>;
> > >> >> >> > + #size-cells = <0>;
> > >> >> >> > + reg = <3>;
> > >> >> >> > +
> > >> >> >> > +
> > >> >> >> > tcon_top_mixer1_out_tcon_lcd0:
> > >> >> >> > endpoint at 0 { +
> > >> >> >> > reg
> > >> >> >> > =
> > >> >> >> > <0>;
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > +
> > >> >> >> > tcon_top_mixer1_out_tcon_lcd1:
> > >> >> >> > endpoint at 1 { +
> > >> >> >> > reg
> > >> >> >> > =
> > >> >> >> > <1>;
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > +
> > >> >> >> > tcon_top_mixer1_out_tcon_tv0:
> > >> >> >> > endpoint at 2 { +
> > >> >> >> > reg
> > >> >> >> > =
> > >> >> >> > <2>;
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > +
> > >> >> >> > tcon_top_mixer1_out_tcon_tv1:
> > >> >> >> > endpoint at 3 { +
> > >> >> >> > reg
> > >> >> >> > =
> > >> >> >> > <3>;
> > >> >> >> > + };
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > + tcon_top_hdmi_in: port at 4 {
> > >> >> >> > + #address-cells = <1>;
> > >> >> >> > + #size-cells = <0>;
> > >> >> >> > + reg = <4>;
> > >> >> >> > +
> > >> >> >> > +
> > >> >> >> > tcon_top_hdmi_in_tcon_tv0:
> > >> >> >> > endpoint at 0 { +
> > >> >> >> > reg
> > >> >> >> > =
> > >> >> >> > <0>;
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > +
> > >> >> >> > tcon_top_hdmi_in_tcon_tv1:
> > >> >> >> > endpoint at 1 { +
> > >> >> >> > reg
> > >> >> >> > =
> > >> >> >> > <1>;
> > >> >> >> > + };
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > + tcon_top_hdmi_out: port at 5 {
> > >> >> >> > + reg = <5>;
> > >> >> >> > +
> > >> >> >> > + tcon_top_hdmi_out_hdmi:
> > >> >> >> > endpoint {
> > >> >> >> > + remote-endpoint
> > >> >> >> > =
> > >> >> >> > <&hdmi_in_tcon_top>; + };
> > >> >> >> > + };
> > >> >> >> > + };
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > + tcon_tv0: lcd-controller at 1c73000 {
> > >> >> >> > + compatible =
> > >> >> >> > "allwinner,sun8i-r40-tcon-tv",
> > >> >> >> > +
> > >> >> >> > "allwinner,sun8i-a83t-tcon-tv";
> > >> >> >> > + reg = <0x01c73000 0x1000>;
> > >> >> >> > + interrupts = <GIC_SPI 51
> > >> >> >> > IRQ_TYPE_LEVEL_HIGH>;
> > >> >> >> > + clocks = <&ccu CLK_BUS_TCON_TV0>,
> > >> >> >> > <&tcon_top
> > >> >> >> > 0>;
> > >> >> >> > + clock-names = "ahb", "tcon-ch1";
> > >> >> >> > + resets = <&ccu RST_BUS_TCON_TV0>;
> > >> >> >> > + reset-names = "lcd";
> > >> >> >> > +
> > >> >> >> > + ports {
> > >> >> >> > + #address-cells = <1>;
> > >> >> >> > + #size-cells = <0>;
> > >> >> >> > +
> > >> >> >> > + tcon_tv0_in: port at 0 {
> > >> >> >> > + reg = <0>;
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > + tcon_tv0_out: port at 1 {
> > >> >> >> > + reg = <1>;
> > >> >> >> > + };
> > >> >> >> > + };
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > + tcon_tv1: lcd-controller at 1c74000 {
> > >> >> >> > + compatible =
> > >> >> >> > "allwinner,sun8i-r40-tcon-tv",
> > >> >> >> > +
> > >> >> >> > "allwinner,sun8i-a83t-tcon-tv";
> > >> >> >> > + reg = <0x01c74000 0x1000>;
> > >> >> >> > + interrupts = <GIC_SPI 52
> > >> >> >> > IRQ_TYPE_LEVEL_HIGH>;
> > >> >> >> > + clocks = <&ccu CLK_BUS_TCON_TV1>,
> > >> >> >> > <&tcon_top
> > >> >> >> > 1>;
> > >> >> >> > + clock-names = "ahb", "tcon-ch1";
> > >> >> >> > + resets = <&ccu RST_BUS_TCON_TV1>;
> > >> >> >> > + reset-names = "lcd";
> > >> >> >> > +
> > >> >> >> > + ports {
> > >> >> >> > + #address-cells = <1>;
> > >> >> >> > + #size-cells = <0>;
> > >> >> >> > +
> > >> >> >> > + tcon_tv1_in: port at 0 {
> > >> >> >> > + reg = <0>;
> > >> >> >> > + };
> > >> >> >> > +
> > >> >> >> > + tcon_tv1_out: port at 1 {
> > >> >> >> > + reg = <1>;
> > >> >> >>
> > >> >> >> You are missing the remote-endpoints for all the TCON-TOP <->
> > >> >> >> TCON
> > >> >> >> connections. Also, on the driver side, there's no code to handle
> > >> >> >> dynamically mapping mixers to the TCONs that are being used. In
> > >> >> >> the
> > >> >> >> past
> > >> >> >> we
> > >> >> >> had simple 1:1 mappings. This is no longer the case, and it needs
> > >> >> >> to
> > >> >> >> be
> > >> >> >> dealt with.
> > >> >> >
> > >> >> > How would TCON TOP driver know how to set muxes? There are no
> > >> >> > appropriate
> > >> >> > bingings for muxes, except for V4L2 subsystem, which doesn't
> > >> >> > really
> > >> >> > work
> > >> >> > here.
> > >> >>
> > >> >> This will end up being a bunch of custom functions exported from the
> > >> >> TCON
> > >> >> TOP driver to the TCON driver. As for bindings, the stuff you
> > >> >> already
> > >> >> have
> > >> >> is mostly enough. You do have to specify the endpoint ID vs
> > >> >> component
> > >> >> mapping, so you can find the correct one.
> > >> >>
> > >> >> For example, you would specify that the IDs for TCON LCDs be 0 and
> > >> >> 1,
> > >> >> and
> > >> >> TCON TVs be 2 and 3. Matching the actual register values is a nice
> > >> >> convenience. These would be used by the driver as the TCON ID.
> > >> >
> > >> > So something that's already done (minus full connections).
> > >> >
> > >> >> Also, we might want to consider them as two pairs of two TCONs (LCD
> > >> >> +
> > >> >> TV).
> > >> >> The CRTC in DRM land is actually the mixer + TCON on our platform.
> > >> >> This
> > >> >> means we only have two CRTCs. So we could have CRTC 0 = mixer 0 +
> > >> >> TCON
> > >> >> LCD
> > >> >> 0 + TCON TV 0. The "TCON_TVx_OUTSEL" and "DE_PORTx PERH Select"
> > >> >> muxes
> > >> >> would
> > >> >> be set at run time in the mode set function, selecting either LCD or
> > >> >> TV
> > >> >> based on what encoder is attached.
Any suggestion how to expand sun4i_tcon_find_engine() to match TCON with
mixer? Now we have mixer 0 and 1, with TCONs 2 and 3. This means that simple
id matching like this:
https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/sun4i/
sun4i_tcon.c#L865
doesn't work anymore. As we discussed already, this is also a bit SoC
specific. Should I add new quirk, which would match mixer id with TCON id with
the SoC specific helper?
This has to be done at probe time, which means it can't be done in mux
callback as though earlier.
> > >> >
> > >> > That proposal would still limit some combinations. For example, that
> > >> > would
> > >> > put DSI always on mixer1, since it can be connected to only LCD TCON
> > >> > 1.
> > >> > It can also cause undesired combination in laptop solutions. Consider
> > >> > that PCB designer connected LCD1 pins to panel for some reason. Panel
> > >> > is
> > >> > definetly main screen and should definetly be connected to mixer0,
> > >> > but
> > >> > in
> > >> > that case, it would be to mixer1.
> > >>
> > >> There's no reason we can't have dynamically assigned mixer+tcon pairs,
> > >> but
> > >> that would mean implementing additional scheduling code that we don't
> > >> have
> > >> yet. The current sunxi-drm and CRTC code assume static mappings.
> > >
> > > I just remembered that your proposed solution while should work on R40,
> > > doesn't really fit in H6 case (which is the main reason for this
> > > series).
> > >
> > > There are only LCD TCON 0 and TV TCON 0. Their HW IDs are the same as on
> > > R40 (1 and 3). Additionaly, there is also HDMI mux as on R40, although
> > > there is only one TV TCON, which can be used only for HDMI (TV output is
> > > connected to LCD TCON through AC200 bridge, put on same die or glued in
> > > same package, not really sure and doesn't really matter).
> >
> > OK. So even there's only one TV TCON, you still have to program all muxes
> > with the correct value, to prevent a) a bad value left by the bootloader
> > and b) bad reset default values.
> >
> > > I would like to write something which is also going to work for H6 out
> > > of
> > > the box. For H6, following combination would work well:
> > > mixer0 = LCD TCON 1 + TV TCON 0
> > > mixer1 = LCD TCON 0 + TV TCON 1
> > >
> > > Or alternatively, we can leave that to mux callback in TCON which would
> > > take care for best variant for given SoC.
> >
> > I think that is the ultimate goal. However, the muxing would be a bit
> > complicated. For all the past SoCs, we were dealing with muxing the
> > downstream encoder. Now we will be muxing mixer and tcon connections
> > as well. You would also have to dynamically switch around the mixer
> > and/or tcon pointers in sun4i_crtc so existing code can still work.
> >
> > > Once we concur on that, I'll try to implement something.
> > >
> > >> We could do this as a second step if you're up to it.
> > >
> > > For my ultimate goal, which is 1st class Kodi experience on mainline,
> > > current proposal works in any case (mixer1 is enough). I just don't like
> > > solutions which are not universal.
> > >
> > >> > Additionaly, since HDMI would became floating between TV TCON 0 and
> > >> > 1,
> > >> > whoever would write board DT would need to know this and enable only
> > >> > TV
> > >> > TCON1 if LCD is desired to be connected to mixer0 (or vice versa).
> > >>
> > >> There's no reason not to have all TCONs enabled by default. We would
> > >> consider the display-engine node controlling whether everything
> > >> actually
> > >> gets used.
> > >>
> > >> > If we really want universal solution with full connections, addtional
> > >> > property has to be defined and used for that.
> > >> >
> > >> >> This limitation is a software one, and should not bleed over into
> > >> >> the
> > >> >> hardware representation.
> > >> >>
> > >> >> > Additionaly, how would HDMI know which TCON belongs to it to
> > >> >> > appropriately
> > >> >> > set possible_crtcs?
> > >> >>
> > >> >> HDMI is connected to the two TCON TVs through the TCON TOP mux. We
> > >> >> handle
> > >> >> TCON output muxing in the TCON driver, using the set_mux callback in
> > >> >> the
> > >> >> quirks. For R40, this callback would probably call into the TCON TOP
> > >> >> driver
> > >> >> asking it to set the mux to some value.
> > >> >>
> > >> >> > Currently, my idea is that board DT creates wanted connections.
> > >> >> > Since
> > >> >> > there is only one valid connection for each mux, driver knows
> > >> >> > eactly
> > >> >> > what
> > >> >> > to write into mux register. HDMI driver can simply check which
> > >> >> > TCON
> > >> >> > connection is valid in HDMI input mux and select it in
> > >> >> > possible_crtcs.
> > >> >>
> > >> >> But that is not how the actual hardware looks like. The device tree
> > >> >> should
> > >> >> model the hardware, not a subset of it just because one thinks the
> > >> >> implementation is difficult or won't be used at all.
> > >> >>
> > >> >> Furthermore, I think you have it backwards. possible_crtcs is
> > >> >> generated
> > >> >> based on (in our case) the connections between TCON and HDMI based
> > >> >> on
> > >> >> the
> > >> >> device tree graph. So if you have both hooked up, both will show up
> > >> >> in
> > >> >> possible_crtcs, but only one crtc will actually be selected to feed
> > >> >> the
> > >> >> HDMI encoder. If you really need to access the current crtc, the
> > >> >> drm_encoder struct contains a pointer to it.
> > >> >>
> > >> >> In DE 1.0 driver, we leave all the muxing to the TCON driver. See
> > >> >>
> > >> >>
> > >> >> https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/sun4i
> > >> >> /s
> > >> >> un4
> > >> >> i_
> > >> >> tcon.c#L537
> > >> >>
> > >> >> So in a sense, the HDMI encoder should be and is hooked up to both
> > >> >> TCONs,
> > >> >> but only one is active at any given time.
> > >> >
> > >> > So something like that I had in v1 series. I'll implement something
> > >> > similar. That would also mean we need R40 specific TV TCON
> > >> > compatible.
> > >> > I'll restore that.
> > >> >
> > >> > Just a question on future situation when TVE driver will be
> > >> > implemented.
> > >> > Suppose that R40 board has TVE0 and HDMI as outputs. This would mean
> > >> > that
> > >> > TVE0 has possible crtcs set as 0b01 and HDMI 0b11. Will be DRM
> > >> > framework
> > >> > smart enough that it will put HDMI on second crtc because TVE0 can be
> > >> > connected to only to first crtc?
> > >>
> > >> Yes. If the possible_clones setting for the encoder is not set, the DRM
> > >> framework will not do mirroring, and will keep each active encoder on a
> > >> separate crtc.
> > >>
> > >> >> > Please also note that mixer0 and mixer1 don't have same
> > >> >> > capabilities
> > >> >> > and
> > >> >> > you generally want mixer0 to be connected to main output. This is
> > >> >> > in
> > >> >> > contrast to DE1 SoCs, where both backends and both frontends have
> > >> >> > same
> > >> >> > capability.
> > >> >>
> > >> >> Yes. But who's to say the two display outputs can't be reversed or
> > >> >> swapped
> > >> >> around? With fixed singular connections, you also rule out mirrored
> > >> >> output.
> > >> >
> > >> > I don't think there is standard way to swap around mixers at runtime,
> > >> > expecially if crtcs are represented as mixer + TCON pair.
> > >>
> > >> As I mentioned above, we will have to do this on our own.
> > >>
> > >> > I'm not sure what do you mean with mirrored output or at least why
> > >> > singular
> > >> > connections would prevent mirroring. HW mirroring needs DRM writeback
> > >> > support which is currently in RFC phase if I'm not mistaken. Once
> > >> > implemented in DRM framework and in sun4i-drm, it would be possible
> > >> > only
> > >> > to mirror mixer0 -> mixer1, because mixer1 doesn't support writeback
> > >> > (at
> > >> > least on existing SoCs).
> > >>
> > >> What I meant was it might be possible to drive two TCONs with one
> > >> mixer,
> > >> or
> > >> two encoders with one TCON. I guess the latter is not possible since
> > >> each
> > >> TCON only has one channel. Not sure about the former.
> > >
> > > I think neither of this two variants are possible, because outputs would
> > > have to have exactly the same resolution and in second case even the
> > > same
> > > pixel clock, which is very unlikely.
> >
> > That is what mirroring is supposed to mean, right? For instance you could
> > have VGA on one and HDMI on the other, at the same resolution and
> > dotclock.
>
> Actually, R40 is the first SoC with DE2 where is theoretically possible to
> connect one mixer to multiple TCONs. I didn't try it yet because BPI M2U has
> apart from HDMI only DSI connector and TV out on test points and neither
> have support in mainline.
Sorry, I spoke too soon. Actually it's not possible to do that even on R40. So
both variants are not possible with current DE2/DE3 SoCs, unless there is
something undocumented.
Best regards,
Jernej
>
> > As far as I'm concerned, the software doesn't need to have all features
> > covered. But that doesn't mean the hardware representation can lack
> > features as well. We already did that once, and now we have some legacy
> > graph parsing code to handle that.
> >
> > Regards
> > ChenYu
More information about the dri-devel
mailing list