[PATCH v2 0/8] drm/rockchip: migrate to common dw-mipi-dsi bridge and dual-dsi

[Philippe CORNU]

Hi Heiko,

and many thanks for this serie.
I tested "partly" it successfully on stm32 (single-dsi, no bind/unbind).

Many thanks,
Philippe :-)


On 06/18/2018 12:27 PM, Heiko Stuebner wrote:
> The Rockchip DSI driver was separate till now, not using the common
> bridge driver that was introduced a bit later. So this series migrates
> over to use that common bridge driver and then also adds support for
> dual-dsi to both the bridge and Rockchip glue code.
> 
> The bridge-migration itself is based on Nickeys earlier v8
> work, but adapted to current kernels and with a new split between probe
> and bind, so that we do not create and drop the dsi-host on each deferred
> bind attempt.
> 
> changes in v2:
> - rebase against newer drm code (dsi-bridge+rockchip changes)
> - add SPDX header to new glue driver
> - expect regular interface lanes from panel (like 4) not the double number
>    Similar to tegra
> - keep links to both master and slave
> 
> 
> The dual-dsi setup follows the port description introduced by Archit [0],
> in that the panel defines two input ports that get connected to both
> dsi-controllers instances. So on Gru-Scarlett this looks for example
> like:
> 
> &mipi_dsi {
> 	status = "okay";
> 	clock-master;
> 
> 	ports {
> 		mipi_out: port at 1 {
> 			reg = <1>;
> 
> 			mipi_out_panel: endpoint {
> 				remote-endpoint = <&mipi_in_panel>;
> 			};
> 		};
> 	};
> 
> 	mipi_panel: panel at 0 {
> 		/* 2 different panels are used, compatibles are in dts files */
> 		reg = <0>;
> 		backlight = <&backlight>;
> 		enable-gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
> 		pinctrl-names = "default";
> 		pinctrl-0 = <&display_rst_l>;
> 
> 		ports {
> 			#address-cells = <1>;
> 			#size-cells = <0>;
> 
> 			port at 0 {
> 				reg = <0>;
> 
> 				mipi_in_panel: endpoint {
> 					remote-endpoint = <&mipi_out_panel>;
> 				};
> 			};
> 
> 			port at 1 {
> 				reg = <1>;
> 
> 				mipi1_in_panel: endpoint at 1 {
> 					remote-endpoint = <&mipi1_out_panel>;
> 				};
> 			};
> 		};
> 	};
> };
> 
> &mipi_dsi1 {
> 	status = "okay";
> 
> 	ports {
> 		mipi1_out: port at 1 {
> 			reg = <1>;
> 
> 			mipi1_out_panel: endpoint {
> 				remote-endpoint = <&mipi1_in_panel>;
> 			};
> 		};
> 	};
> };
> 
> 
> The driver internal setup is pretty similar to what tegra does with
> its ganged-mode [1][2]. But here a new helper function allows to traverse
> the devicetree from one controller port through the panel to find
> another dsi-controller using that same panel. This way we don't need
> a special phandle-property to link the controllers together.
> 
> For the CRTC it is still one single display to handle, only with
> an additional switch that enables the dual-dsi output.
> 
> 
> For practical purposes it is possible to just pick half the series
> (till patch 5) to get the migration to the bridge driver first,
> so that we can get rid of the dw-dsi copy in the Rockchip driver.
> 
> But of course Acks / Reviews of the dsi-bridge changes would be needed.
> 
> 
> [0] https://patchwork.kernel.org/patch/10172381/
> [1] https://lkml.org/lkml/2014/8/5/396
> [2] https://patchwork.kernel.org/patch/5075161/
> 
> Heiko Stuebner (5):
>    drm/bridge/synopsys: dsi: move mipi_dsi_host_unregister to
>      __dw_mipi_dsi_remove
>    drm/bridge/synopsys: dsi: don't call __dw_mipi_dsi_probe from
>      dw_mipi_dsi_bind
>    drm/bridge/synopsys: dsi: defer probing if panel not available in
>      bridge-attach
>    drm/dsi: add helper function to find the second host in a dual-dsi
>      setup
>    drm/rockchip: dsi: add dual mipi support
> 
> Nickey Yang (3):
>    dt-bindings: display: rockchip: update DSI controller
>    drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver
>    drm/bridge/synopsys: dsi: add dual-dsi support
> 
>   .../display/rockchip/dw_mipi_dsi_rockchip.txt |   23 +-
>   drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c |  115 +-
>   drivers/gpu/drm/drm_mipi_dsi.c                |   56 +
>   drivers/gpu/drm/rockchip/Kconfig              |    2 +-
>   drivers/gpu/drm/rockchip/Makefile             |    2 +-
>   .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c   |  992 ++++++++++++
>   drivers/gpu/drm/rockchip/dw-mipi-dsi.c        | 1349 -----------------
>   drivers/gpu/drm/rockchip/rockchip_drm_drv.c   |    2 +-
>   drivers/gpu/drm/rockchip/rockchip_drm_drv.h   |    3 +-
>   drivers/gpu/drm/rockchip/rockchip_drm_vop.c   |    3 +
>   drivers/gpu/drm/rockchip/rockchip_drm_vop.h   |    4 +
>   drivers/gpu/drm/rockchip/rockchip_vop_reg.c   |    1 +
>   include/drm/bridge/dw_mipi_dsi.h              |    6 +-
>   include/drm/drm_mipi_dsi.h                    |    2 +
>   14 files changed, 1179 insertions(+), 1381 deletions(-)
>   create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
>   delete mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>