[PATCH v4 07/11] media: vsp1: Use header display lists for all WPF outputs linked to the DU
Kieran Bingham
kieran.bingham+renesas at ideasonboard.com
Fri Jul 13 10:39:54 UTC 2018
On 24/05/18 12:10, Laurent Pinchart wrote:
> Hi Kieran,
>
> Thank you for the patch.
>
> On Thursday, 3 May 2018 16:36:18 EEST Kieran Bingham wrote:
>> Header mode display lists are now supported on all WPF outputs. To
>> support extended headers and auto-fld capabilities for interlaced mode
>> handling only header mode display lists can be used.
>>
>> Disable the headerless display list configuration, and remove the dead
>> code.
>>
>> Signed-off-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
>> ---
>> drivers/media/platform/vsp1/vsp1_dl.c | 107 ++++++---------------------
>> 1 file changed, 27 insertions(+), 80 deletions(-)
>
> I like the diffstat.
>
>> diff --git a/drivers/media/platform/vsp1/vsp1_dl.c
>> b/drivers/media/platform/vsp1/vsp1_dl.c index fbffbd407b29..56514cd51c51
>> 100644
>> --- a/drivers/media/platform/vsp1/vsp1_dl.c
>> +++ b/drivers/media/platform/vsp1/vsp1_dl.c
>> @@ -94,7 +94,7 @@ struct vsp1_dl_body_pool {
>> * struct vsp1_dl_list - Display list
>> * @list: entry in the display list manager lists
>> * @dlm: the display list manager
>> - * @header: display list header, NULL for headerless lists
>> + * @header: display list header
>> * @dma: DMA address for the header
>> * @body0: first display list body
>> * @bodies: list of extra display list bodies
>> @@ -118,15 +118,9 @@ struct vsp1_dl_list {
>> bool internal;
>> };
>>
>> -enum vsp1_dl_mode {
>> - VSP1_DL_MODE_HEADER,
>> - VSP1_DL_MODE_HEADERLESS,
>> -};
>> -
>> /**
>> * struct vsp1_dl_manager - Display List manager
>> * @index: index of the related WPF
>> - * @mode: display list operation mode (header or headerless)
>> * @singleshot: execute the display list in single-shot mode
>> * @vsp1: the VSP1 device
>> * @lock: protects the free, active, queued, and pending lists
>> @@ -138,7 +132,6 @@ enum vsp1_dl_mode {
>> */
>> struct vsp1_dl_manager {
>> unsigned int index;
>> - enum vsp1_dl_mode mode;
>> bool singleshot;
>> struct vsp1_device *vsp1;
>>
>> @@ -318,6 +311,7 @@ void vsp1_dl_body_write(struct vsp1_dl_body *dlb, u32
>> reg, u32 data) static struct vsp1_dl_list *vsp1_dl_list_alloc(struct
>> vsp1_dl_manager *dlm) {
>> struct vsp1_dl_list *dl;
>> + size_t header_offset;
>>
>> dl = kzalloc(sizeof(*dl), GFP_KERNEL);
>> if (!dl)
>> @@ -330,16 +324,15 @@ static struct vsp1_dl_list *vsp1_dl_list_alloc(struct
>> vsp1_dl_manager *dlm) dl->body0 = vsp1_dl_body_get(dlm->pool);
>> if (!dl->body0)
>> return NULL;
>> - if (dlm->mode == VSP1_DL_MODE_HEADER) {
>> - size_t header_offset = dl->body0->max_entries
>> - * sizeof(*dl->body0->entries);
>>
>> - dl->header = ((void *)dl->body0->entries) + header_offset;
>> - dl->dma = dl->body0->dma + header_offset;
>> + header_offset = dl->body0->max_entries
>> + * sizeof(*dl->body0->entries);
>
> Nitpicking, please align * under =.
This fits on one line. Moved to a single line instead.
>
>>
>> - memset(dl->header, 0, sizeof(*dl->header));
>> - dl->header->lists[0].addr = dl->body0->dma;
>> - }
>> + dl->header = ((void *)dl->body0->entries) + header_offset;
>> + dl->dma = dl->body0->dma + header_offset;
>> +
>> + memset(dl->header, 0, sizeof(*dl->header));
>> + dl->header->lists[0].addr = dl->body0->dma;
>>
>> return dl;
>> }
>> @@ -471,16 +464,9 @@ struct vsp1_dl_body *vsp1_dl_list_get_body0(struct
>> vsp1_dl_list *dl) *
>> * The reference must be explicitly released by a call to
>> vsp1_dl_body_put() * when the body isn't needed anymore.
>> - *
>> - * Additional bodies are only usable for display lists in header mode.
>> - * Attempting to add a body to a header-less display list will return an
>> error. */
>> int vsp1_dl_list_add_body(struct vsp1_dl_list *dl, struct vsp1_dl_body
>> *dlb) {
>> - /* Multi-body lists are only available in header mode. */
>> - if (dl->dlm->mode != VSP1_DL_MODE_HEADER)
>> - return -EINVAL;
>> -
>> refcount_inc(&dlb->refcnt);
>>
>> list_add_tail(&dlb->list, &dl->bodies);
>> @@ -501,17 +487,10 @@ int vsp1_dl_list_add_body(struct vsp1_dl_list *dl,
>> struct vsp1_dl_body *dlb) * Adding a display list to a chain passes
>> ownership of the display list to * the head display list item. The chain is
>> released when the head dl item is * put back with __vsp1_dl_list_put().
>> - *
>> - * Chained display lists are only usable in header mode. Attempts to add a
>> - * display list to a chain in header-less mode will return an error.
>> */
>> int vsp1_dl_list_add_chain(struct vsp1_dl_list *head,
>> struct vsp1_dl_list *dl)
>> {
>> - /* Chained lists are only available in header mode. */
>> - if (head->dlm->mode != VSP1_DL_MODE_HEADER)
>> - return -EINVAL;
>> -
>> head->has_chain = true;
>> list_add_tail(&dl->chain, &head->chain);
>> return 0;
>> @@ -579,17 +558,10 @@ static bool vsp1_dl_list_hw_update_pending(struct
>> vsp1_dl_manager *dlm) return false;
>>
>> /*
>> - * Check whether the VSP1 has taken the update. In headerless mode the
>> - * hardware indicates this by clearing the UPD bit in the DL_BODY_SIZE
>> - * register, and in header mode by clearing the UPDHDR bit in the CMD
>> - * register.
>> + * Check whether the VSP1 has taken the update. In header mode by
>> + * clearing the UPDHDR bit in the CMD register.
>
> I'd write this
>
> * Check whether the VSP1 has taken the update. The hardware indicates
> * this by clearing the UPDHDR bit in the CMD register.
>
Agreed, Done.
>> */
>> - if (dlm->mode == VSP1_DL_MODE_HEADERLESS)
>> - return !!(vsp1_read(vsp1, VI6_DL_BODY_SIZE)
>> - & VI6_DL_BODY_SIZE_UPD);
>> - else
>> - return !!(vsp1_read(vsp1, VI6_CMD(dlm->index))
>> - & VI6_CMD_UPDHDR);
>> + return !!(vsp1_read(vsp1, VI6_CMD(dlm->index)) & VI6_CMD_UPDHDR);
>> }
>>
>> static void vsp1_dl_list_hw_enqueue(struct vsp1_dl_list *dl)
>> @@ -597,26 +569,14 @@ static void vsp1_dl_list_hw_enqueue(struct
>> vsp1_dl_list *dl) struct vsp1_dl_manager *dlm = dl->dlm;
>> struct vsp1_device *vsp1 = dlm->vsp1;
>>
>> - if (dlm->mode == VSP1_DL_MODE_HEADERLESS) {
>> - /*
>> - * In headerless mode, program the hardware directly with the
>> - * display list body address and size and set the UPD bit. The
>> - * bit will be cleared by the hardware when the display list
>> - * processing starts.
>> - */
>> - vsp1_write(vsp1, VI6_DL_HDR_ADDR(0), dl->body0->dma);
>> - vsp1_write(vsp1, VI6_DL_BODY_SIZE, VI6_DL_BODY_SIZE_UPD |
>> - (dl->body0->num_entries * sizeof(*dl->header->lists)));
>> - } else {
>> - /*
>> - * In header mode, program the display list header address. If
>> - * the hardware is idle (single-shot mode or first frame in
>> - * continuous mode) it will then be started independently. If
>> - * the hardware is operating, the VI6_DL_HDR_REF_ADDR register
>> - * will be updated with the display list address.
>> - */
>> - vsp1_write(vsp1, VI6_DL_HDR_ADDR(dlm->index), dl->dma);
>> - }
>> + /*
>> + * In header mode, program the display list header address. If
>
> s/In header mode, program/Program/
>
> You can also reformat the comment block to reach the 80th column.
Done
>
>> + * the hardware is idle (single-shot mode or first frame in
>> + * continuous mode) it will then be started independently. If
>> + * the hardware is operating, the VI6_DL_HDR_REF_ADDR register
>> + * will be updated with the display list address.
>> + */
>> + vsp1_write(vsp1, VI6_DL_HDR_ADDR(dlm->index), dl->dma);
>> }
>>
>> static void vsp1_dl_list_commit_continuous(struct vsp1_dl_list *dl)
>> @@ -674,15 +634,13 @@ void vsp1_dl_list_commit(struct vsp1_dl_list *dl, bool
>> internal) struct vsp1_dl_list *dl_next;
>> unsigned long flags;
>>
>> - if (dlm->mode == VSP1_DL_MODE_HEADER) {
>> - /* Fill the header for the head and chained display lists. */
>> - vsp1_dl_list_fill_header(dl, list_empty(&dl->chain));
>> + /* Fill the header for the head and chained display lists. */
>> + vsp1_dl_list_fill_header(dl, list_empty(&dl->chain));
>>
>> - list_for_each_entry(dl_next, &dl->chain, chain) {
>> - bool last = list_is_last(&dl_next->chain, &dl->chain);
>> + list_for_each_entry(dl_next, &dl->chain, chain) {
>> + bool last = list_is_last(&dl_next->chain, &dl->chain);
>>
>> - vsp1_dl_list_fill_header(dl_next, last);
>> - }
>> + vsp1_dl_list_fill_header(dl_next, last);
>> }
>>
>> dl->internal = internal;
>> @@ -783,13 +741,6 @@ void vsp1_dlm_setup(struct vsp1_device *vsp1)
>>
>> | VI6_DL_CTRL_DC2 | VI6_DL_CTRL_DC1 | VI6_DL_CTRL_DC0
>> | VI6_DL_CTRL_DLE;
>>
>> - /*
>> - * The DRM pipeline operates with display lists in Continuous Frame
>> - * Mode, all other pipelines use manual start.
>> - */
>> - if (vsp1->drm)
>> - ctrl |= VI6_DL_CTRL_CFM0 | VI6_DL_CTRL_NH0;
>> -
>> vsp1_write(vsp1, VI6_DL_CTRL, ctrl);
>> vsp1_write(vsp1, VI6_DL_SWAP, VI6_DL_SWAP_LWS);
>> }
>> @@ -824,8 +775,6 @@ struct vsp1_dl_manager *vsp1_dlm_create(struct
>> vsp1_device *vsp1, return NULL;
>>
>> dlm->index = index;
>> - dlm->mode = index == 0 && !vsp1->info->uapi
>> - ? VSP1_DL_MODE_HEADERLESS : VSP1_DL_MODE_HEADER;
>> dlm->singleshot = vsp1->info->uapi;
>> dlm->vsp1 = vsp1;
>>
>> @@ -834,13 +783,11 @@ struct vsp1_dl_manager *vsp1_dlm_create(struct
>> vsp1_device *vsp1,
>>
>> /*
>> * Initialize the display list body and allocate DMA memory for the body
>> - * and the optional header. Both are allocated together to avoid memory
>> + * and the header. Both are allocated together to avoid memory
>> * fragmentation, with the header located right after the body in
>> * memory.
>> */
>> - header_size = dlm->mode == VSP1_DL_MODE_HEADER
>> - ? ALIGN(sizeof(struct vsp1_dl_header), 8)
>> - : 0;
>> + header_size = ALIGN(sizeof(struct vsp1_dl_header), 8);
>>
>> dlm->pool = vsp1_dl_body_pool_create(vsp1, prealloc,
>> VSP1_DL_NUM_ENTRIES, header_size);
>
> While at it, could you update the documentation of the
> vsp1_dlm_irq_frame_end() function to s/header mode/single-shot mode/ ?
>
> With these small issues fixed,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Collected
Thanks
Kieran
More information about the dri-devel
mailing list