[PATCH 14/15] drm/doc: use inline kerneldoc style for drm_crtc_state

Sean Paul seanpaul at chromium.org
Fri Jul 13 15:33:05 UTC 2018


On Mon, Jul 09, 2018 at 10:40:15AM +0200, Daniel Vetter wrote:
> Lots of added text here since I think the various control flow bits
> are worth explaining a bit better.
> 
> Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>

The added docs surrounding enable/active will be most appreciated :-)

Reviewed-by: Sean Paul <seanpaul at chromium.org>


> ---
>  include/drm/drm_crtc.h | 110 ++++++++++++++++++++++++++++++++---------
>  1 file changed, 86 insertions(+), 24 deletions(-)
> 
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 0cfc098f31d3..3788e1235e24 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -77,21 +77,6 @@ struct drm_plane_helper_funcs;
>  
>  /**
>   * struct drm_crtc_state - mutable CRTC state
> - * @crtc: backpointer to the CRTC
> - * @enable: whether the CRTC should be enabled, gates all other state
> - * @active: whether the CRTC is actively displaying (used for DPMS)
> - * @planes_changed: planes on this crtc are updated
> - * @mode_changed: @mode or @enable has been changed
> - * @active_changed: @active has been toggled.
> - * @connectors_changed: connectors to this crtc have been updated
> - * @zpos_changed: zpos values of planes on this crtc have been updated
> - * @color_mgmt_changed: color management properties have changed (degamma or
> - *	gamma LUT or CSC matrix)
> - * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes
> - * @connector_mask: bitmask of (1 << drm_connector_index(connector)) of attached connectors
> - * @encoder_mask: bitmask of (1 << drm_encoder_index(encoder)) of attached encoders
> - * @mode_blob: &drm_property_blob for @mode
> - * @state: backpointer to global drm_atomic_state
>   *
>   * Note that the distinction between @enable and @active is rather subtile:
>   * Flipping @active while @enable is set without changing anything else may
> @@ -102,31 +87,104 @@ struct drm_plane_helper_funcs;
>   *
>   * The three booleans active_changed, connectors_changed and mode_changed are
>   * intended to indicate whether a full modeset is needed, rather than strictly
> - * describing what has changed in a commit.
> - * See also: drm_atomic_crtc_needs_modeset()
> + * describing what has changed in a commit. See also:
> + * drm_atomic_crtc_needs_modeset()
> + *
> + * WARNING: Transitional helpers (like drm_helper_crtc_mode_set() or
> + * drm_helper_crtc_mode_set_base()) do not maintain many of the derived control
> + * state like @plane_mask so drivers not converted over to atomic helpers should
> + * not rely on these being accurate!
>   */
>  struct drm_crtc_state {
> +	/** @crtc: backpointer to the CRTC */
>  	struct drm_crtc *crtc;
>  
> +	/**
> +	 * @enable: Whether the CRTC should be enabled, gates all other state.
> +	 * This controls reservations of shared resources. Actual hardware state
> +	 * is controlled by @active.
> +	 */
>  	bool enable;
> +
> +	/**
> +	 * @active: Whether the CRTC is actively displaying (used for DPMS).
> +	 * Implies that @enable is set. The driver must not release any shared
> +	 * resources if @active is set to false but @enable still true, because
> +	 * userspace expects that a DPMS ON always succeeds.
> +	 *
> +	 * Hence drivers must not consult @active in their various
> +	 * &drm_mode_config_funcs.atomic_check callback to reject an atomic
> +	 * commit. They can consult it to aid in the computation of derived
> +	 * hardware state, since even in the DPMS OFF state the display hardware
> +	 * should be as much powered down as when the CRTC is completely
> +	 * disabled through setting @enable to false.
> +	 */
>  	bool active;
>  
> -	/* computed state bits used by helpers and drivers */
> +	/**
> +	 * @planes_changed: Planes on this crtc are updated. Used by the atomic
> +	 * helpers and drivers to steer the atomic commit control flow.
> +	 */
>  	bool planes_changed : 1;
> +
> +	/**
> +	 * @mode_changed: @mode or @enable has been changed. Used by the atomic
> +	 * helpers and drivers to steer the atomic commit control flow. See also
> +	 * drm_atomic_crtc_needs_modeset().
> +	 *
> +	 * Drivers are supposed to set this for any CRTC state changes that
> +	 * require a full modeset. They can also reset it to false if e.g. a
> +	 * @mode change can be done without a full modeset by only changing
> +	 * scaler settings.
> +	 */
>  	bool mode_changed : 1;
> +
> +	/**
> +	 * @active_changed: @active has been toggled. Used by the atomic
> +	 * helpers and drivers to steer the atomic commit control flow. See also
> +	 * drm_atomic_crtc_needs_modeset().
> +	 */
>  	bool active_changed : 1;
> +
> +	/**
> +	 * @connectors_changed: Connectors to this crtc have been updated,
> +	 * either in their state or routing. Used by the atomic
> +	 * helpers and drivers to steer the atomic commit control flow. See also
> +	 * drm_atomic_crtc_needs_modeset().
> +	 *
> +	 * Drivers are supposed to set this as-needed from their own atomic
> +	 * check code, e.g. from &drm_encoder_helper_funcs.atomic_check
> +	 */
>  	bool connectors_changed : 1;
> +	/**
> +	 * @zpos_changed: zpos values of planes on this crtc have been updated.
> +	 * Used by the atomic helpers and drivers to steer the atomic commit
> +	 * control flow.
> +	 */
>  	bool zpos_changed : 1;
> +	/**
> +	 * @color_mgmt_changed: Color management properties have changed
> +	 * (@gamma_lut, @degamma_lut or @ctm). Used by the atomic helpers and
> +	 * drivers to steer the atomic commit control flow.
> +	 */
>  	bool color_mgmt_changed : 1;
>  
> -	/* attached planes bitmask:
> -	 * WARNING: transitional helpers do not maintain plane_mask so
> -	 * drivers not converted over to atomic helpers should not rely
> -	 * on plane_mask being accurate!
> +	/**
> +	 * @plane_mask: Bitmask of drm_plane_mask(plane) of planes attached to
> +	 * this CRTC.
>  	 */
>  	u32 plane_mask;
>  
> +	/**
> +	 * @connector_mask: Bitmask of drm_connector_mask(connector) of
> +	 * connectors attached to this CRTC.
> +	 */
>  	u32 connector_mask;
> +
> +	/**
> +	 * @encoder_mask: Bitmask of drm_encoder_mask(encoder) of encoders
> +	 * attached to this CRTC.
> +	 */
>  	u32 encoder_mask;
>  
>  	/**
> @@ -136,7 +194,7 @@ struct drm_crtc_state {
>  	 * differences between the mode requested by userspace in @mode and what
>  	 * is actually programmed into the hardware.
>  	 *
> -	 * For drivers using drm_bridge, this stores hardware display timings
> +	 * For drivers using &drm_bridge, this stores hardware display timings
>  	 * used between the CRTC and the first bridge. For other drivers, the
>  	 * meaning of the adjusted_mode field is purely driver implementation
>  	 * defined information, and will usually be used to store the hardware
> @@ -161,7 +219,10 @@ struct drm_crtc_state {
>  	 */
>  	struct drm_display_mode mode;
>  
> -	/* blob property to expose current mode to atomic userspace */
> +	/**
> +	 * @mode_blob: &drm_property_blob for @mode, for exposing the mode to
> +	 * atomic userspace.
> +	 */
>  	struct drm_property_blob *mode_blob;
>  
>  	/**
> @@ -265,6 +326,7 @@ struct drm_crtc_state {
>  	 */
>  	struct drm_crtc_commit *commit;
>  
> +	/** @state: backpointer to global drm_atomic_state */
>  	struct drm_atomic_state *state;
>  };
>  
> -- 
> 2.18.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Sean Paul, Software Engineer, Google / Chromium OS


More information about the dri-devel mailing list