[PATCH v2 5/5] drm/vkms: Implement CRC debugfs API

Haneen Mohammed hamohammed.sa at gmail.com
Mon Jul 16 23:52:20 UTC 2018


On Mon, Jul 16, 2018 at 02:22:56PM -0400, Sean Paul wrote:
> On Sat, Jul 14, 2018 at 03:23:32PM +0300, Haneen Mohammed wrote:
> > Implement the set_crc_source() callback.
> > Compute CRC using crc32 on the visible part of the framebuffer.
> > Use ordered workqueue to compute and add CRC at the end of a vblank.
> > 
> > Use appropriate synchronization methods since the crc computation must
> > be atomic wrt the generated vblank event for a given atomic update,
> > 
> > Signed-off-by: Haneen Mohammed <hamohammed.sa at gmail.com>
> 
> Hey Haneen,
> Thanks for revising this patch set. Things are looking good across the series,
> just a few more comments :-)
> 

Thank you so much for the review! 

> > ---
> > Changes in v2:
> > - Include this patch in this patchset.
> > 
> >  drivers/gpu/drm/vkms/Makefile     |  2 +-
> >  drivers/gpu/drm/vkms/vkms_crtc.c  | 60 ++++++++++++++++++++++++++-----
> >  drivers/gpu/drm/vkms/vkms_drv.c   |  1 +
> >  drivers/gpu/drm/vkms/vkms_drv.h   | 21 +++++++++++
> >  drivers/gpu/drm/vkms/vkms_plane.c | 10 ++++++
> >  5 files changed, 85 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/vkms/Makefile b/drivers/gpu/drm/vkms/Makefile
> > index 986297da51bf..37966914f70b 100644
> > --- a/drivers/gpu/drm/vkms/Makefile
> > +++ b/drivers/gpu/drm/vkms/Makefile
> > @@ -1,3 +1,3 @@
> > -vkms-y := vkms_drv.o vkms_plane.o vkms_output.o vkms_crtc.o vkms_gem.o
> > +vkms-y := vkms_drv.o vkms_plane.o vkms_output.o vkms_crtc.o vkms_gem.o vkms_crc.o
> >  
> >  obj-$(CONFIG_DRM_VKMS) += vkms.o
> > diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
> > index 26babb85ca77..f3a674db33b8 100644
> > --- a/drivers/gpu/drm/vkms/vkms_crtc.c
> > +++ b/drivers/gpu/drm/vkms/vkms_crtc.c
> > @@ -10,18 +10,36 @@
> >  #include <drm/drm_atomic_helper.h>
> >  #include <drm/drm_crtc_helper.h>
> >  
> > -static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
> > +static void _vblank_handle(struct vkms_output *output)
> >  {
> > -	struct vkms_output *output = container_of(timer, struct vkms_output,
> > -						  vblank_hrtimer);
> >  	struct drm_crtc *crtc = &output->crtc;
> > -	int ret_overrun;
> > +	struct vkms_crtc_state *state = to_vkms_crtc_state(crtc->state);
> >  	bool ret;
> >  
> > +	int crc_enabled = 0;
> > +
> > +	spin_lock(&output->lock);
> > +	crc_enabled = output->crc_enabled;
> 
> Aside from the implicit bool -> int cast, I don't think you need this local var,
> just use output->crc_enabled directly below.
> 
> >  	ret = drm_crtc_handle_vblank(crtc);
> >  	if (!ret)
> >  		DRM_ERROR("vkms failure on handling vblank");
> 
> This would be more useful with the error code printed.
> 

I think this only returns false on failure. Also I've noticed most of the usage of
drm_crtc_handle_vblank don't check the return value, should I do the
same as well and drop ret and error message?

> >  
> > +	if (state && crc_enabled) {
> > +		state->n_frame = drm_crtc_accurate_vblank_count(crtc);
> > +		queue_work(output->crc_workq, &state->crc_work);
> > +	}
> > +
> > +	spin_unlock(&output->lock);
> > +}
> > +
> > +static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
> > +{
> > +	struct vkms_output *output = container_of(timer, struct vkms_output,
> > +						  vblank_hrtimer);
> > +	int ret_overrun;
> > +
> > +	_vblank_handle(output);
> > +
> >  	ret_overrun = hrtimer_forward_now(&output->vblank_hrtimer,
> >  					  output->period_ns);
> >  
> > @@ -97,6 +115,8 @@ vkms_atomic_crtc_duplicate_state(struct drm_crtc *crtc)
> >  
> >  	__drm_atomic_helper_crtc_duplicate_state(crtc, &vkms_state->base);
> >  
> > +	INIT_WORK(&vkms_state->crc_work, vkms_crc_work_handle);
> > +
> >  	return &vkms_state->base;
> >  }
> >  
> > @@ -104,11 +124,18 @@ static void vkms_atomic_crtc_destroy_state(struct drm_crtc *crtc,
> >  					   struct drm_crtc_state *state)
> >  {
> >  	struct vkms_crtc_state *vkms_state;
> > +	struct vkms_output *vkms_out = drm_crtc_to_vkms_output(crtc);
> >  
> >  	vkms_state = to_vkms_crtc_state(state);
> >  
> >  	__drm_atomic_helper_crtc_destroy_state(state);
> > -	kfree(vkms_state);
> > +
> > +	if (vkms_state) {
> > +		flush_workqueue(vkms_out->crc_workq);
> 
> I'm a little worried about this bit. Since the workqueue is per-output, is it
> possible you'll be waiting for more frames to complete than you need to be?
> 

I see, maybe I should flush per work_struct instead?

> > +		drm_framebuffer_put(&vkms_state->data.fb);
> > +		memset(&vkms_state->data, 0, sizeof(struct vkms_crc_data));
> > +		kfree(vkms_state);
> > +	}
> >  }
> >  
> >  static const struct drm_crtc_funcs vkms_crtc_funcs = {
> > @@ -120,6 +147,7 @@ static const struct drm_crtc_funcs vkms_crtc_funcs = {
> >  	.atomic_destroy_state   = vkms_atomic_crtc_destroy_state,
> >  	.enable_vblank		= vkms_enable_vblank,
> >  	.disable_vblank		= vkms_disable_vblank,
> > +	.set_crc_source		= vkms_set_crc_source,
> >  };
> >  
> >  static void vkms_crtc_atomic_enable(struct drm_crtc *crtc,
> > @@ -134,26 +162,37 @@ static void vkms_crtc_atomic_disable(struct drm_crtc *crtc,
> >  	drm_crtc_vblank_off(crtc);
> >  }
> >  
> > +static void vkms_crtc_atomic_begin(struct drm_crtc *crtc,
> > +				   struct drm_crtc_state *old_crtc_state)
> > +{
> > +	struct vkms_output *vkms_output = drm_crtc_to_vkms_output(crtc);
> > +
> > +	spin_lock_irq(&vkms_output->lock);
> 
> Hmm, you can't lock across atomic_begin/flush. What is this protecting against?
> 

I did this per Daniel recommendation:
1- spin_lock_irq -> vkms_crtc_atomic_begin
2- update vkms_crc_data and get ref to fb -> vkms_primary_plane_update
3- spin_unlock_irq after vblank event -> vkms_crtc_atomic_flush

> > +}
> > +
> >  static void vkms_crtc_atomic_flush(struct drm_crtc *crtc,
> >  				   struct drm_crtc_state *old_crtc_state)
> >  {
> > -	unsigned long flags;
> > +	struct vkms_output *vkms_output = drm_crtc_to_vkms_output(crtc);
> >  
> >  	if (crtc->state->event) {
> > -		spin_lock_irqsave(&crtc->dev->event_lock, flags);
> > +		spin_lock(&crtc->dev->event_lock);
> 
> What's the rationale behind this change?
> 

hm I am not sure if this is correct, but I assume because spin_lock_irq in atomic_begin
would disable interrupts and since this is before we unlock vkms_output->lock with 
spin_unlock_irq so irqsave here is not necessary?

> >  
> >  		if (drm_crtc_vblank_get(crtc) != 0)
> >  			drm_crtc_send_vblank_event(crtc, crtc->state->event);
> >  		else
> >  			drm_crtc_arm_vblank_event(crtc, crtc->state->event);
> >  
> > -		spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
> > +		spin_unlock(&crtc->dev->event_lock);
> >  
> >  		crtc->state->event = NULL;
> >  	}
> > +
> > +	spin_unlock_irq(&vkms_output->lock);
> >  }
> >  
> >  static const struct drm_crtc_helper_funcs vkms_crtc_helper_funcs = {
> > +	.atomic_begin	= vkms_crtc_atomic_begin,
> >  	.atomic_flush	= vkms_crtc_atomic_flush,
> >  	.atomic_enable	= vkms_crtc_atomic_enable,
> >  	.atomic_disable	= vkms_crtc_atomic_disable,
> > @@ -162,6 +201,7 @@ static const struct drm_crtc_helper_funcs vkms_crtc_helper_funcs = {
> >  int vkms_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
> >  		   struct drm_plane *primary, struct drm_plane *cursor)
> >  {
> > +	struct vkms_output *vkms_out = drm_crtc_to_vkms_output(crtc);
> >  	int ret;
> >  
> >  	ret = drm_crtc_init_with_planes(dev, crtc, primary, cursor,
> > @@ -173,5 +213,9 @@ int vkms_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
> >  
> >  	drm_crtc_helper_add(crtc, &vkms_crtc_helper_funcs);
> >  
> > +	spin_lock_init(&vkms_out->lock);
> > +
> > +	vkms_out->crc_workq = alloc_ordered_workqueue("vkms_crc_workq", 0);
> > +
> >  	return ret;
> >  }
> > diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
> > index 37aa2ef33b21..5d78bd97e69c 100644
> > --- a/drivers/gpu/drm/vkms/vkms_drv.c
> > +++ b/drivers/gpu/drm/vkms/vkms_drv.c
> > @@ -46,6 +46,7 @@ static void vkms_release(struct drm_device *dev)
> >  	platform_device_unregister(vkms->platform);
> >  	drm_mode_config_cleanup(&vkms->drm);
> >  	drm_dev_fini(&vkms->drm);
> > +	destroy_workqueue(vkms->output.crc_workq);
> >  }
> >  
> >  static struct drm_driver vkms_driver = {
> > diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
> > index bf811d0ec349..95985649768c 100644
> > --- a/drivers/gpu/drm/vkms/vkms_drv.h
> > +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> > @@ -20,12 +20,23 @@ static const u32 vkms_formats[] = {
> >  	DRM_FORMAT_XRGB8888,
> >  };
> >  
> > +struct vkms_crc_data {
> > +	struct drm_rect src;
> > +	struct drm_framebuffer fb;
> > +};
> > +
> >  /**
> >   * vkms_crtc_state - Driver specific CRTC state
> >   * @base: base CRTC state
> > + * @crc_work: work struct to compute and add CRC entries
> > + * @data: data required for CRC computation
> > + * @n_frame: frame number for computed CRC
> >   */
> >  struct vkms_crtc_state {
> >  	struct drm_crtc_state base;
> > +	struct work_struct crc_work;
> > +	struct vkms_crc_data data;
> > +	unsigned int n_frame;
> >  };
> >  
> >  struct vkms_output {
> > @@ -35,6 +46,11 @@ struct vkms_output {
> >  	struct hrtimer vblank_hrtimer;
> >  	ktime_t period_ns;
> >  	struct drm_pending_vblank_event *event;
> > +	bool crc_enabled;
> 
> Where is this set to true?
> 

Oh sorry I forgot to add a vkms_crc.c which sets crc_enabled in
set_crc_source callback! 

I'll work on fixing the issues you mentioned here and the other patches
as well, thank you so much again!
Haneen

> > +	/* ordered wq for crc_work */
> > +	struct workqueue_struct *crc_workq;
> > +	/* protects concurrent access to crc_data */
> > +	spinlock_t lock;
> >  };
> >  
> >  struct vkms_device {
> > @@ -95,4 +111,9 @@ void *vkms_gem_vmap(struct drm_gem_object *obj);
> >  
> >  void vkms_gem_vunmap(struct drm_gem_object *obj);
> >  
> > +/* CRC Support */
> > +int vkms_set_crc_source(struct drm_crtc *crtc, const char *src_name,
> > +			size_t *values_cnt);
> > +void vkms_crc_work_handle(struct work_struct *work);
> > +
> >  #endif /* _VKMS_DRV_H_ */
> > diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c
> > index aaf7c35faed6..1e0ee8ca8bd6 100644
> > --- a/drivers/gpu/drm/vkms/vkms_plane.c
> > +++ b/drivers/gpu/drm/vkms/vkms_plane.c
> > @@ -24,6 +24,16 @@ static const struct drm_plane_funcs vkms_plane_funcs = {
> >  static void vkms_primary_plane_update(struct drm_plane *plane,
> >  				      struct drm_plane_state *old_state)
> >  {
> > +	struct vkms_crtc_state *state;
> > +
> > +	if (!plane->state->crtc || !plane->state->fb)
> > +		return;
> > +
> > +	state = to_vkms_crtc_state(plane->state->crtc->state);
> > +	memcpy(&state->data.src, &plane->state->src, sizeof(struct drm_rect));
> > +	memcpy(&state->data.fb, plane->state->fb,
> > +	       sizeof(struct drm_framebuffer));
> > +	drm_framebuffer_get(&state->data.fb);
> >  }
> >  
> >  static int vkms_plane_atomic_check(struct drm_plane *plane,
> > -- 
> > 2.17.1
> > 
> 
> -- 
> Sean Paul, Software Engineer, Google / Chromium OS


More information about the dri-devel mailing list