[PATCH 1/2] drm/panel: Add support for Armadeus ST0700 Adapt

Fabio Estevam festevam at gmail.com
Tue Jul 17 12:28:31 UTC 2018


Hi Sébastien,

On Tue, Jul 17, 2018 at 4:23 AM, Sébastien Szymanski
<sebastien.szymanski at armadeus.com> wrote:
> This patch adds support for the Armadeus ST0700 Adapt. It comes with a
> Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so
> that it can be connected on the TFT header of Armadeus Dev boards.
>
> Signed-off-by: Sébastien Szymanski <sebastien.szymanski at armadeus.com>
> ---
>  .../display/panel/armadeus,st0700-adapt.txt        |  9 +++++++
>  drivers/gpu/drm/panel/panel-simple.c               | 29 ++++++++++++++++++++++
>  2 files changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt b/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt
> new file mode 100644
> index 000000000000..a30d63db3c8f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt
> @@ -0,0 +1,9 @@
> +Armadeus ST0700 Adapt. A Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT with
> +an adapter board.
> +
> +Required properties:
> +- compatible: "armadeus,st0700-adapt"

Shouldn't this be named "santek,st0700i5y" instead?

Santek is the vendor of the panel and st0700i5y is the model.

Then you could add a "santek" entry in
Documentation/devicetree/bindings/vendor-prefixes.txt.

Regards,

Fabio Estevam


More information about the dri-devel mailing list