[PATCH v4 11/11] drm: rcar-du: Support interlaced video output through vsp1

[Laurent Pinchart]

Hi Kieran,

On Monday, 16 July 2018 20:20:30 EEST Kieran Bingham wrote:
> On 24/05/18 12:50, Laurent Pinchart wrote:
> > On Thursday, 3 May 2018 16:36:22 EEST Kieran Bingham wrote:
> >> Use the newly exposed VSP1 interface to enable interlaced frame support
> >> through the VSP1 lif pipelines.
> > 
> > s/lif/LIF/
> 
> Fixed.
> 
> >> Signed-off-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
> >> ---
> >> 
> >>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 1 +
> >>  drivers/gpu/drm/rcar-du/rcar_du_vsp.c  | 3 +++
> >>  2 files changed, 4 insertions(+)
> >> 
> >> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> >> b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index d71d709fe3d9..206532959ec9
> >> 100644
> >> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> >> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> >> @@ -289,6 +289,7 @@ static void rcar_du_crtc_set_display_timing(struct
> >> rcar_du_crtc *rcrtc)
> >>  	/* Signal polarities */
> >>  	value = ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? DSMR_VSL : 0)
> >>  	      | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? DSMR_HSL : 0)
> >> +	      | ((mode->flags & DRM_MODE_FLAG_INTERLACE) ? DSMR_ODEV : 0)
> > 
> > How will this affect Gen2 ?.
> 
> The bit is documented identically for Gen2. Potentially / Probably it
> 'might' reverse the fields... I'm not certain yet. I don't have access
> to a Gen2 platform to test.
> 
> I'll see if this change can be dropped, but I think it is playing a role
> in ensuring that the field detection occurs in VSP1 through the
> VI6_STATUS_FLD_STD() field. (see vsp1_dlm_irq_frame_end())
> 
> > Could you document what this change does in the
> > commit message ?
> 
> This sets the position in the buffer of the ODDF. With this set, the ODD
> field is located in the second half (BOTTOM) of the same frame of the
> interlace display.
> 
> Otherwise, it's in the first half (TOP)
> 
> I faced some issues as to the ordering when testing, so I suspect this
> might actually be related to that. (re VI6_STATUS_FLD_STD in
> vsp1_dlm_irq_frame_end()).
> 
> As you mention - this may have a negative effect on the Gen2
> implementation - so it needs considering with that.
> 
> 
> /me to investigate further.

Thank you. I don't object to this change, but I'd like to know what its 
implications are on Gen2. It might even fix a bug :-) Let me know if you'd 
like me to run tests on a Lager board.

> >>  	      | DSMR_DIPM_DISP | DSMR_CSPM;
> >>  	
> >>  	rcar_du_crtc_write(rcrtc, DSMR, value);
> >> 
> >> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> >> b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c index af7822a66dee..c7b37232ee91
> >> 100644
> >> --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> >> +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> >> @@ -186,6 +186,9 @@ static void rcar_du_vsp_plane_setup(struct
> >> rcar_du_vsp_plane *plane)
> >>  	};
> >>  	unsigned int i;
> >> 
> >> +	cfg.interlaced = !!(plane->plane.state->crtc->mode.flags
> >> +			    & DRM_MODE_FLAG_INTERLACE);
> >> +
> >>  	cfg.src.left = state->state.src.x1 >> 16;
> >>  	cfg.src.top = state->state.src.y1 >> 16;
> >>  	cfg.src.width = drm_rect_width(&state->state.src) >> 16;

-- 
Regards,

Laurent Pinchart