[PATCH v3 17/18] arm64: dts: allwinner: a64: pine64: Enable HDMI output

[Jagan Teki]

Enable all necessary HDMI pipeline nodes with HDMI out
connector on pine64 board.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v3:
- Enable all pipeline components
Changes for v2:
- none

 .../boot/dts/allwinner/sun50i-a64-pine64.dts  | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 1b9b92e541d2..4d1553f7d2a9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -62,6 +62,21 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
 };
 
 &ehci0 {
@@ -82,6 +97,17 @@
 
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -99,6 +125,10 @@
 	};
 };
 
+&mixer1 {
+	status = "okay";
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
@@ -238,6 +268,10 @@
 	status = "disabled";
 };
 
+&tcon1 {
+	status = "okay";
+};
+
 /* On Exp and Euler connectors */
 &uart0 {
 	pinctrl-names = "default";
-- 
2.17.1