[PATCH v3 00/18] arm64: allwinner: Add A64 DE2 HDMI support
Jagan Teki
jagannadh.teki at gmail.com
Wed Jul 18 12:56:43 UTC 2018
On Wed, Jul 18, 2018 at 6:14 PM, Maxime Ripard
<maxime.ripard at bootlin.com> wrote:
> On Wed, Jul 18, 2018 at 04:24:40PM +0530, Jagan Teki wrote:
>> Allwinner A64 has display engine pipeline like other Allwinner SOC's A83T/H3/H5.
>>
>> A64 behaviour similar to Allwinner A83T where
>> Mixer0 => TCON0 => LVDS/RGB/MIPI-DSI
>> Mixer1 => TCON1 => HDMI
>> as per Display System Block Diagram from Allwinner_A64_User_Manual_V1.1.pdf
>>
>> This is third patch-set followed with previous RFC[1], first and second
>> series[2][3] and merely concentrated on HDMI pipeline through TCON1 and
>> rest will add eventually.
>>
>> This series fixed previous version comments
>> - Rebasing on linux-next
>> - sqash all pipeline components in one patch
>> - Enable all pipeline components in board dts
>> - about documenting fallback compatibles
>> - adding new compatible for mixer1
>
> You still haven't figured out the SRAM parts. We asked you to fix this
> in the v1 and the v2 already, and we're not going to merge this
> without those bits figured out properly.
Sorry I'm not sure what I'm trying to do on SRAM here because the last
mail, I have waited for Icenowy changes about simple_fb with sram_c on
ccu node and those are merged. can you elaborate please.
>
>> Log:
>> [ 1.450984] Jagan: sun8i_mixer_probe
>> [ 1.464981] sun4i-drm display-engine: bound 1200000.mixer (ops sun8i_mixer_ops)
>> [ 1.472572] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_ops)
>> [ 1.480676] sun8i-dw-hdmi 1ee0000.hdmi: Linked as a consumer to regulator.10
>> [ 1.488738] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
>> [ 1.498879] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
>> [ 1.507372] sun4i-drm display-engine: bound 1ee0000.hdmi (ops sun8i_dw_hdmi_ops)
>> [ 1.514778] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>> [ 1.521398] [drm] No driver support for vblank timestamp query.
>> [ 1.684611] random: fast init done
>> [ 2.011575] Console: switching to colour frame buffer device 180x56
>> [ 2.049858] sun4i-drm display-engine: fb0: DRM emulated frame buffer device
>> [ 2.057268] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
>>
>> Note:
>> Pine64 boards are unable to get edid by default like other A64 boards,
>> but forcing 'video=HDMI-A-1:1920x1080 at 60D' kernel command line can
>> create edid with display on penel
>
> Then that needs to be figured out before it's enabled, instead of
> having a hack that barely works.
Any suggestion to work.
More information about the dri-devel
mailing list