[PATCH v3 2/9] drm/exynos: move connector creation to attach callback

[Inki Dae]

2018년 07월 24일 17:04에 Inki Dae 이(가) 쓴 글:
> Hi,
> 
> 2018년 06월 19일 17:19에 Maciej Purski 이(가) 쓴 글:
>> The current implementation assumes that the only possible peripheral
>> device for DSIM is a panel. Using an output bridge child device
>> should also be possible.
>>
>> If an output bridge is available, don't create a new connector.
>> Instead, call drm_bridge_attach() and set encoder's bridge to NULL
>> in order to avoid an out bridge from being visible by the framework, as
>> the DSI bus needs control on enabling its child output bridge.
>>
>> Such sequence is required by Toshiba TC358764 bridge, which is a DSI
>> peripheral bridge device.
> 
> Right, we should consider DSI to LVDS bridge.

In addition, could you update below binding document?
Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt

Thanks,
Inki Dae

> 
> Thanks,
> Inki Dae
> 
>>
>> Signed-off-by: Maciej Purski <m.purski at samsung.com>
>> ---
>>  drivers/gpu/drm/exynos/exynos_drm_dsi.c | 38 ++++++++++++++++++++++-----------
>>  1 file changed, 25 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> index 9599e6b..c0408c0 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> @@ -255,6 +255,7 @@ struct exynos_dsi {
>>  	struct mipi_dsi_host dsi_host;
>>  	struct drm_connector connector;
>>  	struct drm_panel *panel;
>> +	struct drm_bridge *out_bridge;
>>  	struct device *dev;
>>  
>>  	void __iomem *reg_base;
>> @@ -1499,7 +1500,30 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
>>  				  struct mipi_dsi_device *device)
>>  {
>>  	struct exynos_dsi *dsi = host_to_dsi(host);
>> -	struct drm_device *drm = dsi->connector.dev;
>> +	struct drm_encoder *encoder = &dsi->encoder;
>> +	struct drm_device *drm = encoder->dev;
>> +	struct drm_bridge *out_bridge;
>> +
>> +	out_bridge  = of_drm_find_bridge(device->dev.of_node);
>> +	if (out_bridge) {
>> +		drm_bridge_attach(encoder, out_bridge, NULL);
>> +		dsi->out_bridge = out_bridge;
>> +		encoder->bridge = NULL;
>> +	} else {
>> +		int ret = exynos_dsi_create_connector(encoder);
>> +
>> +		if (ret) {
>> +			DRM_ERROR("failed to create connector ret = %d\n", ret);
>> +			drm_encoder_cleanup(encoder);
>> +			return ret;
>> +		}
>> +
>> +		dsi->panel = of_drm_find_panel(device->dev.of_node);
>> +		if (dsi->panel) {
>> +			drm_panel_attach(dsi->panel, &dsi->connector);
>> +			dsi->connector.status = connector_status_connected;
>> +		}
>> +	}
>>  
>>  	/*
>>  	 * This is a temporary solution and should be made by more generic way.
>> @@ -1518,11 +1542,6 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
>>  	dsi->lanes = device->lanes;
>>  	dsi->format = device->format;
>>  	dsi->mode_flags = device->mode_flags;
>> -	dsi->panel = of_drm_find_panel(device->dev.of_node);
>> -	if (dsi->panel) {
>> -		drm_panel_attach(dsi->panel, &dsi->connector);
>> -		dsi->connector.status = connector_status_connected;
>> -	}
>>  	exynos_drm_crtc_get_by_type(drm, EXYNOS_DISPLAY_TYPE_LCD)->i80_mode =
>>  			!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO);
>>  
>> @@ -1654,13 +1673,6 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,
>>  	if (ret < 0)
>>  		return ret;
>>  
>> -	ret = exynos_dsi_create_connector(encoder);
>> -	if (ret) {
>> -		DRM_ERROR("failed to create connector ret = %d\n", ret);
>> -		drm_encoder_cleanup(encoder);
>> -		return ret;
>> -	}
>> -
>>  	if (dsi->mic_bridge_node) {
>>  		mic_bridge = of_drm_find_bridge(dsi->mic_bridge_node);
>>  		if (mic_bridge)
>>