[PATCH 10/13] drm/msm/adreno: Convert the show/crash file format
Jordan Crouse
jcrouse at codeaurora.org
Tue Jul 24 16:33:28 UTC 2018
Convert the format of the 'show' debugfs file and the crash
dump to a format resembling YAML. This should be easier to
parse and be more flexible for future changes and expansions.
v2: Use a standard .rst for the msm crashdump documentation
Signed-off-by: Jordan Crouse <jcrouse at codeaurora.org>
---
Documentation/gpu/msm-crash-dump.rst | 71 +++++++++++++++++++++++++
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 21 +++++---
2 files changed, 84 insertions(+), 8 deletions(-)
create mode 100644 Documentation/gpu/msm-crash-dump.rst
diff --git a/Documentation/gpu/msm-crash-dump.rst b/Documentation/gpu/msm-crash-dump.rst
new file mode 100644
index 000000000000..75ab1d541c03
--- /dev/null
+++ b/Documentation/gpu/msm-crash-dump.rst
@@ -0,0 +1,71 @@
+=====================
+MSM Crash Dump Format
+=====================
+
+Following a GPU hang the MSM driver outputs debugging information via
+/sys/kernel/dri/X/show or via devcoredump (/sys/class/devcoredump/dcdX/data).
+This document describes how the output is formatted.
+
+Each entry is in the form key: value. Sections headers will not have a value
+and all the contents of a section will be indented two spaces from the header.
+Each section might have multiple array entries the start of which is designated
+by a (-).
+
+Mappings
+--------
+
+kernel
+ The kernel version that generated the dump (UTS_RELEASE).
+
+module
+ The module that generated the crashdump.
+
+time
+ The kernel time at crash formated as seconds.microseconds.
+
+comm
+ Comm string for the binary that generated the fault.
+
+cmdline
+ Command line for the binary that generated the fault.
+
+revision
+ ID of the GPU that generated the crash formatted as
+ core.major.minor.patchlevel separated by dots.
+
+rbbm-status
+ The current value of RBBM_STATUS which shows what top level GPU
+ components are in use at the time of crash.
+
+ringbuffer
+ Section containing the contents of each ringbuffer. Each ringbuffer is
+ identified with an id number.
+
+ id
+ Ringbuffer ID (0 based index). Each ringbuffer in the section
+ will have its own unique id.
+ iova
+ GPU address of the ringbuffer.
+
+ last-fence
+ The last fence that was issued on the ringbuffer
+
+ retired-fence
+ The last fence retired on the ringbuffer.
+
+ rptr
+ The current read pointer (rptr) for the ringbuffer.
+
+ wptr
+ The current write pointer (wptr) for the ringbuffer.
+
+registers
+ Set of registers values. Each entry is on its own line enclosed
+ by brackets { }.
+
+ offset
+ Byte offset of the register from the start of the
+ GPU memory region.
+
+ value
+ Hexadecimal value of the register.
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index c72e3afc43a8..c7a998d9dc85 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -445,23 +445,28 @@ void adreno_show(struct msm_gpu *gpu, struct msm_gpu_state *state,
if (IS_ERR_OR_NULL(state))
return;
- drm_printf(p, "status: %08x\n", state->rbbm_status);
drm_printf(p, "revision: %d (%d.%d.%d.%d)\n",
adreno_gpu->info->revn, adreno_gpu->rev.core,
adreno_gpu->rev.major, adreno_gpu->rev.minor,
adreno_gpu->rev.patchid);
- for (i = 0; i < gpu->nr_rings; i++) {
- drm_printf(p, "rb %d: fence: %d/%d\n", i,
- state->ring[i].fence, state->ring[i].seqno);
+ drm_printf(p, "rbbm-status: 0x%08x\n", state->rbbm_status);
+
+ drm_puts(p, "ringbuffer:\n");
- drm_printf(p, " rptr: %d\n", state->ring[i].rptr);
- drm_printf(p, "rb wptr: %d\n", state->ring[i].wptr);
+ for (i = 0; i < gpu->nr_rings; i++) {
+ drm_printf(p, " - id: %d\n", i);
+ drm_printf(p, " iova: 0x%016llx\n", state->ring[i].iova);
+ drm_printf(p, " last-fence: %d\n", state->ring[i].seqno);
+ drm_printf(p, " retired-fence: %d\n", state->ring[i].fence);
+ drm_printf(p, " rptr: %d\n", state->ring[i].rptr);
+ drm_printf(p, " wptr: %d\n", state->ring[i].wptr);
}
- drm_printf(p, "IO:region %s 00000000 00020000\n", gpu->name);
+ drm_puts(p, "registers:\n");
+
for (i = 0; i < state->nr_registers; i++) {
- drm_printf(p, "IO:R %08x %08x\n",
+ drm_printf(p, " - { offset: 0x%04x, value: 0x%08x }\n",
state->registers[i * 2] << 2,
state->registers[(i * 2) + 1]);
}
--
2.18.0
More information about the dri-devel
mailing list