[PATCH v5 3/9] drm/exynos: enable out_bridge in exynos_dsi_enable

Andrzej Hajda a.hajda at samsung.com
Wed Jul 25 15:46:38 UTC 2018


From: Maciej Purski <m.purski at samsung.com>

As the out bridge will not be enabled directly by the framework,
it should be enabled by DSI. exynos_dsi_enable() should handle a case,
when there is an out_bridge connected as a DSI peripheral.

Changed in v5:
- fixed error path in exynos_dsi_enable

Signed-off-by: Maciej Purski <m.purski at samsung.com>
[ a.hajda at samsung.com: v5 ]
Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
---
 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 38 +++++++++++++++----------
 1 file changed, 23 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index f5f51f584fa0..54cfcebe7a2c 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1383,29 +1383,37 @@ static void exynos_dsi_enable(struct drm_encoder *encoder)
 		return;
 
 	pm_runtime_get_sync(dsi->dev);
-
 	dsi->state |= DSIM_STATE_ENABLED;
 
-	ret = drm_panel_prepare(dsi->panel);
-	if (ret < 0) {
-		dsi->state &= ~DSIM_STATE_ENABLED;
-		pm_runtime_put_sync(dsi->dev);
-		return;
+	if (dsi->panel) {
+		ret = drm_panel_prepare(dsi->panel);
+		if (ret < 0)
+			goto err_put_sync;
+	} else {
+		drm_bridge_pre_enable(dsi->out_bridge);
 	}
 
 	exynos_dsi_set_display_mode(dsi);
 	exynos_dsi_set_display_enable(dsi, true);
 
-	ret = drm_panel_enable(dsi->panel);
-	if (ret < 0) {
-		dsi->state &= ~DSIM_STATE_ENABLED;
-		exynos_dsi_set_display_enable(dsi, false);
-		drm_panel_unprepare(dsi->panel);
-		pm_runtime_put_sync(dsi->dev);
-		return;
+	if (dsi->panel) {
+		ret = drm_panel_enable(dsi->panel);
+		if (ret < 0)
+			goto err_display_disable;
+	} else {
+		drm_bridge_enable(dsi->out_bridge);
 	}
 
 	dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE;
+	return;
+
+err_display_disable:
+	exynos_dsi_set_display_enable(dsi, false);
+	drm_panel_unprepare(dsi->panel);
+
+err_put_sync:
+	dsi->state &= ~DSIM_STATE_ENABLED;
+	pm_runtime_put(dsi->dev);
 }
 
 static void exynos_dsi_disable(struct drm_encoder *encoder)
@@ -1418,11 +1426,11 @@ static void exynos_dsi_disable(struct drm_encoder *encoder)
 	dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE;
 
 	drm_panel_disable(dsi->panel);
+	drm_bridge_disable(dsi->out_bridge);
 	exynos_dsi_set_display_enable(dsi, false);
 	drm_panel_unprepare(dsi->panel);
-
+	drm_bridge_post_disable(dsi->out_bridge);
 	dsi->state &= ~DSIM_STATE_ENABLED;
-
 	pm_runtime_put_sync(dsi->dev);
 }
 
-- 
2.18.0



More information about the dri-devel mailing list