[PATCH v3.1 10/10] arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI
Jagan Teki
jagan at amarulasolutions.com
Fri Jul 27 13:57:08 UTC 2018
On Fri, Jul 27, 2018 at 6:56 PM, Icenowy Zheng <icenowy at aosc.io> wrote:
>
>
> 于 2018年7月27日 GMT+08:00 下午8:56:15, Maxime Ripard <maxime.ripard at bootlin.com> 写到:
>>On Fri, Jul 27, 2018 at 01:12:57AM +0800, Icenowy Zheng wrote:
>>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
>>b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
>>> index 1b9b92e541d2..1b972bade9f6 100644
>>> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
>>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
>>> @@ -62,6 +62,21 @@
>>> chosen {
>>> stdout-path = "serial0:115200n8";
>>> };
>>> +
>>> + connector {
>>> + compatible = "hdmi-connector";
>>> + type = "a";
>>> +
>>> + port {
>>> + hdmi_con_in: endpoint {
>>> + remote-endpoint = <&hdmi_out_con>;
>>> + };
>>> + };
>>> + };
>>> +};
>>> +
>>> +&de {
>>> + status = "okay";
>>> };
>>>
>>> &ehci0 {
>>> @@ -82,6 +97,17 @@
>>>
>>> };
>>>
>>> +&hdmi {
>>> + hdmi-supply = <®_dldo1>;
>>> + status = "okay";
>>> +};
>>> +
>>> +&hdmi_out {
>>> + hdmi_out_con: endpoint {
>>> + remote-endpoint = <&hdmi_con_in>;
>>> + };
>>> +};
>>> +
>>> &i2c1 {
>>> pinctrl-names = "default";
>>> pinctrl-0 = <&i2c1_pins>;
>>> @@ -99,6 +125,10 @@
>>> };
>>> };
>>>
>>> +&mixer1 {
>>> + status = "okay";
>>> +};
>>> +
>>> &mmc0 {
>>> pinctrl-names = "default";
>>> pinctrl-0 = <&mmc0_pins>;
>>> @@ -238,6 +268,10 @@
>>> status = "disabled";
>>> };
>>>
>>> +&tcon1 {
>>> + status = "okay";
>>> +};
>>
>>Is it working or not on the pine64?
>
> Not tested yet, as my main A64 device is Pine A64-LTS now.
I have seen BPI-M64 seems failing.
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version
4.18.0-rc6-next-20180727-00014-gc7092bc38139 (jagan at jagan-XPS-13-9350)
(gcc version 6.3.1 20170109 (Linaro GCC 6.3-2
017.02)) #1 SMP PREEMPT Fri Jul 27 19:05:15 IST 2018
[ 0.000000] Machine model: BananaPi-M64
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 32 MiB at 0x00000000bc000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem
0x0000000000000000-0x00000000bdffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xbbfd7780-0xbbfd8f3f]
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000bdffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bdffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bdffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] random: get_random_bytes called from
start_kernel+0xa4/0x414 with crng_init=0
[ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56728
r8192 d29288 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 843419
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 508032
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk
root=/dev/mmcblk0p2 rootwait
[ 0.000000] Memory: 1979032K/2064384K available (10812K kernel
code, 1382K rwdata, 5096K rodata, 1344K init, 382K bss, 52584K
reserved, 32768K
cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] Persistent clock returned invalid value
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps
every 4398046511097ns
[ 0.000491] Console: colour dummy device 80x25
[ 0.000575] Calibrating delay loop (skipped), value calculated
using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000589] pid_max: default: 32768 minimum: 301
[ 0.000671] Security Framework initialized
[ 0.001977] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002635] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.002684] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.002713] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.024041] ASID allocator initialised with 32768 entries
[ 0.032035] rcu: Hierarchical SRCU implementation.
[ 0.041639] EFI services will not be available.
[ 0.048073] smp: Bringing up secondary CPUs ...
[ 0.080932] Detected VIPT I-cache on CPU1
[ 0.080992] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.112631] Detected VIPT I-cache on CPU2
[ 0.112667] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.144707] Detected VIPT I-cache on CPU3
[ 0.144739] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.144814] smp: Brought up 1 node, 4 CPUs
[ 0.144840] SMP: Total of 4 processors activated.
[ 0.144849] CPU features: detected: 32-bit EL0 Support
[ 0.154877] CPU: All CPU(s) started at EL2
[ 0.154897] alternatives: patching kernel code
[ 0.156490] devtmpfs: initialized
[ 0.161841] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.161905] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.163334] pinctrl core: initialized pinctrl subsystem
[ 0.164938] DMI not present or invalid.
[ 0.165455] NET: Registered protocol family 16
[ 0.165896] audit: initializing netlink subsys (disabled)
[ 0.166040] audit: type=2000 audit(0.160:1): state=initialized
audit_enabled=0 res=1
[ 0.167564] cpuidle: using governor menu
[ 0.167960] vdso: 2 pages (1 code @ (____ptrval____), 1 data @
(____ptrval____))
[ 0.167974] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.171685] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.172948] Serial: AMBA PL011 UART driver
[ 0.195691] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.196128] cryptd: max_cpu_qlen set to 1000
[ 0.196923] ACPI: Interpreter disabled.
[ 0.198046] vgaarb: loaded
[ 0.198380] SCSI subsystem initialized
[ 0.199024] usbcore: registered new interface driver usbfs
[ 0.199093] usbcore: registered new interface driver hub
[ 0.199167] usbcore: registered new device driver usb
[ 0.200125] pps_core: LinuxPPS API ver. 1 registered
[ 0.200137] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti at linux.it>
[ 0.200166] PTP clock support registered
[ 0.200335] EDAC MC: Ver: 3.0.0
[ 0.201397] Advanced Linux Sound Architecture Driver Initialized.
[ 0.202248] clocksource: Switched to clocksource arch_sys_counter
[ 0.202467] VFS: Disk quotas dquot_6.6.0
[ 0.202538] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.202946] pnp: PnP ACPI: disabled
[ 0.210691] NET: Registered protocol family 2
[ 0.211403] tcp_listen_portaddr_hash hash table entries: 1024
(order: 2, 16384 bytes)
[ 0.211468] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.211683] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.211987] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.212142] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.212209] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.212390] NET: Registered protocol family 1
[ 0.212813] RPC: Registered named UNIX socket transport module.
[ 0.212821] RPC: Registered udp transport module.
[ 0.212827] RPC: Registered tcp transport module.
[ 0.212833] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.213695] kvm [1]: 8-bit VMID
[ 0.215775] kvm [1]: vgic interrupt IRQ1
[ 0.215975] kvm [1]: Hyp mode initialized successfully
[ 0.220557] Initialise system trusted keyrings
[ 0.220710] workingset: timestamp_bits=45 max_order=19 bucket_order=0
[ 0.229546] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.230522] NFS: Registering the id_resolver key type
[ 0.230557] Key type id_resolver registered
[ 0.230564] Key type id_legacy registered
[ 0.230580] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.230785] 9p: Installing v9fs 9p2000 file system support
[ 0.230909] pstore: using deflate compression
[ 0.234029] Key type asymmetric registered
[ 0.234046] Asymmetric key parser 'x509' registered
[ 0.234104] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 244)
[ 0.234115] io scheduler noop registered
[ 0.234122] io scheduler deadline registered
[ 0.234384] io scheduler cfq registered (default)
[ 0.234394] io scheduler mq-deadline registered
[ 0.234402] io scheduler kyber registered
[ 0.235702] sun50i-de2-bus 1000000.de2: DMA mask not set
[ 0.235744] sun50i-de2-bus 1000000.de2: Error couldn't map SRAM to device
[ 0.236353] sun4i-usb-phy 1c19400.phy: DMA mask not set
[ 0.236428] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[ 0.239670] sun50i-a64-pinctrl 1c20800.pinctrl: DMA mask not set
[ 0.241173] sun50i-a64-r-pinctrl 1f02c00.pinctrl: DMA mask not set
[ 0.242701] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi
PIO driver
[ 0.246771] EINJ: ACPI disabled.
[ 0.249349] sun50i-a64-ccu 1c20000.clock: DMA mask not set
[ 0.252866] sunxi-sram 1c00000.syscon: DMA mask not set
[ 0.253218] sram 18000.sram: DMA mask not set
[ 0.259221] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.261898] SuperH (H)SCI(F) driver initialized
[ 0.262440] msm_serial: driver initialized
[ 0.263282] sun4i-drm display-engine: DMA mask not set
[ 0.263852] sun4i-tcon 1c0c000.lcd-controller: DMA mask not set
[ 0.263952] sun4i-tcon 1c0d000.lcd-controller: DMA mask not set
[ 0.264879] sun8i-dw-hdmi 1ee0000.hdmi: DMA mask not set
[ 0.265396] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.273880] loop: module loaded
[ 0.279047] libphy: Fixed MDIO Bus: probed
[ 0.279631] tun: Universal TUN/TAP device driver, 1.6
[ 0.280729] thunder_xcv, ver 1.0
[ 0.280798] thunder_bgx, ver 1.0
[ 0.280852] nicpf, ver 1.0
[ 0.281358] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.281367] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.281427] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 0.281435] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.281490] igbvf: Intel(R) Gigabit Virtual Function Network Driver
- version 2.4.0-k
[ 0.281498] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.281875] sky2: driver version 1.30
[ 0.282744] VFIO - User Level meta-driver version: 0.3
[ 0.284239] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.284252] ehci-pci: EHCI PCI platform driver
[ 0.284303] ehci-platform: EHCI generic platform driver
[ 0.284417] ehci-platform 1c1a000.usb: DMA mask not set
[ 0.284559] ehci-platform 1c1a000.usb: EHCI Host Controller
[ 0.284587] ehci-platform 1c1a000.usb: new USB bus registered,
assigned bus number 1
[ 0.285256] ehci-platform 1c1a000.usb: irq 14, io mem 0x01c1a000
[ 0.298255] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[ 0.299042] hub 1-0:1.0: USB hub found
[ 0.299079] hub 1-0:1.0: 1 port detected
[ 0.299554] ehci-platform 1c1b000.usb: DMA mask not set
[ 0.299832] ehci-orion: EHCI orion driver
[ 0.300060] ehci-exynos: EHCI EXYNOS driver
[ 0.300186] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.300219] ohci-pci: OHCI PCI platform driver
[ 0.300309] ohci-platform: OHCI generic platform driver
[ 0.300404] ohci-platform 1c1a400.usb: DMA mask not set
[ 0.300502] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[ 0.300528] ohci-platform 1c1a400.usb: new USB bus registered,
assigned bus number 2
[ 0.300860] ohci-platform 1c1a400.usb: irq 15, io mem 0x01c1a400
[ 0.362977] hub 2-0:1.0: USB hub found
[ 0.363017] hub 2-0:1.0: 1 port detected
[ 0.363420] ohci-platform 1c1b400.usb: DMA mask not set
[ 0.363676] ohci-exynos: OHCI EXYNOS driver
[ 0.364386] usbcore: registered new interface driver usb-storage
[ 0.364713] musb-sunxi 1c19000.usb: DMA mask not set
[ 0.367499] sun6i-rtc 1f00000.rtc: DMA mask not set
[ 0.367858] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
[ 0.367871] sun6i-rtc 1f00000.rtc: RTC enabled
[ 0.368196] i2c /dev entries driver
[ 0.372718] pwrseq_simple wifi_pwrseq: DMA mask not set
[ 0.373113] sdhci: Secure Digital Host Controller Interface driver
[ 0.373125] sdhci: Copyright(c) Pierre Ossman
[ 0.373456] Synopsys Designware Multimedia Card Interface Driver
[ 0.374617] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.375695] leds-gpio leds: DMA mask not set
[ 0.376136] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.377457] usbcore: registered new interface driver usbhid
[ 0.377472] usbhid: USB HID core driver
[ 0.380972] NET: Registered protocol family 17
[ 0.381230] 9pnet: Installing 9P2000 support
[ 0.381304] Key type dns_resolver registered
[ 0.381985] registered taskstats version 1
[ 0.381994] Loading compiled-in X.509 certificates
[ 0.390508] sunxi-de2-clks 1000000.clock: DMA mask not set
[ 0.392353] sun8i-mixer 1200000.mixer: DMA mask not set
[ 0.402857] sun4i-drm display-engine: bound 1200000.mixer (ops
sun8i_mixer_ops)
[ 0.403112] sun4i-drm display-engine: bound 1c0d000.lcd-controller
(ops sun4i_tcon_ops)
[ 0.403172] sun8i-dw-hdmi 1ee0000.hdmi: Couldn't get regulator
[ 0.403191] sun4i-drm display-engine: failed to bind 1ee0000.hdmi
(ops sun8i_dw_hdmi_ops): -517
[ 0.403322] sun4i-drm display-engine: Couldn't bind all pipelines components
[ 0.403422] sun4i-drm display-engine: master bind failed: -517
[ 0.404396] sunxi-rsb 1f03400.rsb: DMA mask not set
[ 0.404487] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
[ 0.404925] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found
[ 0.407592] dcdc1: supplied by regulator-dummy
[ 0.407904] dcdc2: supplied by regulator-dummy
[ 0.408131] dcdc4: supplied by regulator-dummy
[ 0.408355] dcdc5: supplied by regulator-dummy
[ 0.408608] dcdc6: supplied by regulator-dummy
[ 0.408822] dc1sw: supplied by regulator-dummy
[ 0.409052] aldo1: supplied by regulator-dummy
[ 0.409167] afvcc-csi: Bringing 3300000uV into 2800000-2800000uV
[ 0.409380] aldo2: supplied by regulator-dummy
[ 0.409598] aldo3: supplied by regulator-dummy
[ 0.409836] dldo1: supplied by regulator-dummy
[ 0.410087] dldo2: supplied by regulator-dummy
[ 0.410160] vcc-wifi: Bringing 2900000uV into 3300000-3300000uV
[ 0.410393] dldo3: supplied by regulator-dummy
[ 0.410623] dldo4: supplied by regulator-dummy
[ 0.410884] eldo1: supplied by regulator-dummy
[ 0.411113] eldo2: supplied by regulator-dummy
[ 0.411333] eldo3: supplied by regulator-dummy
[ 0.411596] fldo1: supplied by regulator-dummy
[ 0.411835] fldo2: supplied by regulator-dummy
[ 0.412088] rtc-ldo: supplied by regulator-dummy
[ 0.412300] ldo-io0: supplied by regulator-dummy
[ 0.412561] ldo-io1: supplied by regulator-dummy
[ 0.412846] drivevbus: supplied by regulator-dummy
[ 0.413096] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[ 0.413597] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[ 0.419074] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.419935] dw-apb-uart 1c28000.serial: DMA mask not set
[ 0.420349] console [ttyS0] disabled
[ 0.440883] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 21,
base_baud = 1500000) is a U6_16550A
[ 1.757108] console [ttyS0] enabled
[ 1.761887] dw-apb-uart 1c28400.serial: DMA mask not set
[ 1.788099] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 22,
base_baud = 1500000) is a U6_16550A
[ 1.802439] mv64xxx_i2c 1c2b000.i2c: DMA mask not set
[ 1.809485] sunxi-mmc 1c0f000.mmc: DMA mask not set
[ 1.814529] sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.1
[ 1.821642] WARNING: CPU: 2 PID: 50 at
./include/linux/dma-mapping.h:516 sunxi_mmc_probe+0x1f4/0x508
[ 1.830760] Modules linked in:
[ 1.833818] CPU: 2 PID: 50 Comm: kworker/2:1 Not tainted
4.18.0-rc6-next-20180727-00014-gc7092bc38139 #1
[ 1.843281] Hardware name: BananaPi-M64 (DT)
[ 1.847554] Workqueue: events deferred_probe_work_func
[ 1.852689] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 1.857476] pc : sunxi_mmc_probe+0x1f4/0x508
[ 1.861742] lr : sunxi_mmc_probe+0x1d4/0x508
[ 1.866004] sp : ffff00000975bb60
[ 1.869313] x29: ffff00000975bb60 x28: 0000000000000000
[ 1.874621] x27: ffff0000096abce8 x26: ffff00000917de78
[ 1.879929] x25: 0000000000000000 x24: ffff80007897fdd8
[ 1.885237] x23: ffff000009169000 x22: ffff000008b17000
[ 1.890545] x21: ffff80007897fd80 x20: ffff800079063410
[ 1.895852] x19: ffff80007897f800 x18: ffffffffffffffff
[ 1.901160] x17: 0000000000000000 x16: 0000000000000000
[ 1.906468] x15: ffff0000091696c8 x14: ffff00008975ba37
[ 1.911775] x13: ffffff0000000000 x12: 0000000000000008
[ 1.917083] x11: 0101010101010101 x10: ffffff7f7fffffff
[ 1.922390] x9 : 0000000000000000 x8 : ffff800078fe4140
[ 1.927697] x7 : ffff800078fe4140 x6 : ffff800078fe4141
[ 1.933004] x5 : ffff800078879ec0 x4 : ffff8000789b3000
[ 1.938311] x3 : ffff8000789b3100 x2 : 0000000000000000
[ 1.943618] x1 : ffff8000791327c0 x0 : 0000000000000000
[ 1.948926] Call trace:
[ 1.951373] sunxi_mmc_probe+0x1f4/0x508
[ 1.955293] platform_drv_probe+0x50/0xa8
[ 1.959299] really_probe+0x1fc/0x290
[ 1.962959] driver_probe_device+0x58/0x100
[ 1.967138] __device_attach_driver+0x9c/0xf8
[ 1.971490] bus_for_each_drv+0x70/0xc8
[ 1.975322] __device_attach+0xdc/0x138
[ 1.979153] device_initial_probe+0x10/0x18
[ 1.983331] bus_probe_device+0x94/0xa0
[ 1.987162] deferred_probe_work_func+0x6c/0xa0
[ 1.991690] process_one_work+0x1c8/0x318
[ 1.995697] worker_thread+0x234/0x428
[ 1.999443] kthread+0xf8/0x128
[ 2.002584] ret_from_fork+0x10/0x18
[ 2.006154] ---[ end trace 7f686a1ed4dfbded ]---
[ 2.011182] sunxi-mmc 1c0f000.mmc: swiotlb: coherent allocation
failed, size=4096
[ 2.018674] CPU: 2 PID: 50 Comm: kworker/2:1 Tainted: G W
4.18.0-rc6-next-20180727-00014-gc7092bc38139 #1
[ 2.029524] Hardware name: BananaPi-M64 (DT)
[ 2.033793] Workqueue: events deferred_probe_work_func
[ 2.038924] Call trace:
[ 2.041372] dump_backtrace+0x0/0x150
[ 2.045031] show_stack+0x14/0x20
[ 2.048346] dump_stack+0x8c/0xac
[ 2.051660] swiotlb_alloc+0x130/0x170
[ 2.055406] __dma_alloc+0xc4/0x1b0
[ 2.058893] sunxi_mmc_probe+0x34c/0x508
[ 2.062812] platform_drv_probe+0x50/0xa8
[ 2.066817] really_probe+0x1fc/0x290
[ 2.070475] driver_probe_device+0x58/0x100
[ 2.074653] __device_attach_driver+0x9c/0xf8
[ 2.079004] bus_for_each_drv+0x70/0xc8
[ 2.082835] __device_attach+0xdc/0x138
[ 2.086667] device_initial_probe+0x10/0x18
[ 2.090844] bus_probe_device+0x94/0xa0
[ 2.094675] deferred_probe_work_func+0x6c/0xa0
[ 2.099202] process_one_work+0x1c8/0x318
[ 2.103209] worker_thread+0x234/0x428
[ 2.106954] kthread+0xf8/0x128
[ 2.110092] ret_from_fork+0x10/0x18
[ 2.113685] sunxi-mmc 1c0f000.mmc: Failed to allocate DMA descriptor mem
[ 2.120519] sunxi-mmc 1c0f000.mmc: Dropping the link to regulator.1
[ 2.126845] sunxi-mmc: probe of 1c0f000.mmc failed with error -12
[ 2.134550] sunxi-mmc 1c10000.mmc: DMA mask not set
[ 2.139583] sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.11
[ 2.146279] sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.13
[ 2.153403] sunxi-mmc 1c10000.mmc: swiotlb: coherent allocation
failed, size=4096
[ 2.160898] CPU: 2 PID: 50 Comm: kworker/2:1 Tainted: G W
4.18.0-rc6-next-20180727-00014-gc7092bc38139 #1
[ 2.171749] Hardware name: BananaPi-M64 (DT)
[ 2.176026] Workqueue: events deferred_probe_work_func
[ 2.181159] Call trace:
[ 2.183608] dump_backtrace+0x0/0x150
[ 2.187269] show_stack+0x14/0x20
[ 2.190583] dump_stack+0x8c/0xac
[ 2.193899] swiotlb_alloc+0x130/0x170
[ 2.197645] __dma_alloc+0xc4/0x1b0
[ 2.201135] sunxi_mmc_probe+0x34c/0x508
[ 2.205056] platform_drv_probe+0x50/0xa8
[ 2.209061] really_probe+0x1fc/0x290
[ 2.212719] driver_probe_device+0x58/0x100
[ 2.216897] __device_attach_driver+0x9c/0xf8
[ 2.221249] bus_for_each_drv+0x70/0xc8
[ 2.225081] __device_attach+0xdc/0x138
[ 2.228912] device_initial_probe+0x10/0x18
[ 2.233090] bus_probe_device+0x94/0xa0
[ 2.236922] deferred_probe_work_func+0x6c/0xa0
[ 2.241450] process_one_work+0x1c8/0x318
[ 2.245456] worker_thread+0x234/0x428
[ 2.249202] kthread+0xf8/0x128
[ 2.252341] ret_from_fork+0x10/0x18
[ 2.255939] sunxi-mmc 1c10000.mmc: Failed to allocate DMA descriptor mem
[ 2.262765] sunxi-mmc 1c10000.mmc: Dropping the link to regulator.13
[ 2.269180] sunxi-mmc 1c10000.mmc: Dropping the link to regulator.11
[ 2.275574] sunxi-mmc: probe of 1c10000.mmc failed with error -12
[ 2.283233] sunxi-mmc 1c11000.mmc: DMA mask not set
[ 2.288259] sunxi-mmc 1c11000.mmc: Linked as a consumer to regulator.1
[ 2.295295] sunxi-mmc 1c11000.mmc: swiotlb: coherent allocation
failed, size=4096
[ 2.302792] CPU: 2 PID: 50 Comm: kworker/2:1 Tainted: G W
4.18.0-rc6-next-20180727-00014-gc7092bc38139 #1
[ 2.313642] Hardware name: BananaPi-M64 (DT)
[ 2.317920] Workqueue: events deferred_probe_work_func
[ 2.323052] Call trace:
[ 2.325501] dump_backtrace+0x0/0x150
[ 2.329162] show_stack+0x14/0x20
[ 2.332476] dump_stack+0x8c/0xac
[ 2.335790] swiotlb_alloc+0x130/0x170
[ 2.339537] __dma_alloc+0xc4/0x1b0
[ 2.343026] sunxi_mmc_probe+0x34c/0x508
[ 2.346946] platform_drv_probe+0x50/0xa8
[ 2.350951] really_probe+0x1fc/0x290
[ 2.354610] driver_probe_device+0x58/0x100
[ 2.358789] __device_attach_driver+0x9c/0xf8
[ 2.363141] bus_for_each_drv+0x70/0xc8
[ 2.366973] __device_attach+0xdc/0x138
[ 2.370804] device_initial_probe+0x10/0x18
[ 2.374983] bus_probe_device+0x94/0xa0
[ 2.378815] deferred_probe_work_func+0x6c/0xa0
[ 2.383343] process_one_work+0x1c8/0x318
[ 2.387349] worker_thread+0x234/0x428
[ 2.391095] kthread+0xf8/0x128
[ 2.394235] ret_from_fork+0x10/0x18
[ 2.397830] sunxi-mmc 1c11000.mmc: Failed to allocate DMA descriptor mem
[ 2.404650] sunxi-mmc 1c11000.mmc: Dropping the link to regulator.1
[ 2.410967] sunxi-mmc: probe of 1c11000.mmc failed with error -12
[ 2.430226] sun4i-drm display-engine: bound 1200000.mixer (ops
sun8i_mixer_ops)
[ 2.437766] sun4i-drm display-engine: bound 1c0d000.lcd-controller
(ops sun4i_tcon_ops)
[ 2.445889] sun8i-dw-hdmi 1ee0000.hdmi: Linked as a consumer to regulator.10
[ 2.453957] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller
v1.32a with HDCP (sun8i_dw_hdmi_phy)
[ 2.463964] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI
I2C bus driver
[ 2.472454] sun4i-drm display-engine: bound 1ee0000.hdmi (ops
sun8i_dw_hdmi_ops)
[ 2.479866] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.486486] [drm] No driver support for vblank timestamp query.
[ 2.648129] random: fast init done
[ 2.699113] WARNING: CPU: 2 PID: 50 at
./include/linux/dma-mapping.h:516 drm_gem_cma_create+0x68/0x128
[ 2.708404] Modules linked in:
[ 2.711464] CPU: 2 PID: 50 Comm: kworker/2:1 Tainted: G W
4.18.0-rc6-next-20180727-00014-gc7092bc38139 #1
[ 2.722314] Hardware name: BananaPi-M64 (DT)
[ 2.726585] Workqueue: events deferred_probe_work_func
[ 2.731720] pstate: 80000005 (Nzcv daif -PAN -UAO)
[ 2.736505] pc : drm_gem_cma_create+0x68/0x128
[ 2.740944] lr : drm_gem_cma_create+0x40/0x128
[ 2.745380] sp : ffff00000975b870
[ 2.748689] x29: ffff00000975b870 x28: ffff800078d34c18
[ 2.753997] x27: ffff800078d34d00 x26: ffff8000789b3f00
[ 2.759304] x25: ffff80007897f800 x24: ffff800078d126f0
[ 2.764613] x23: ffff000008b17000 x22: ffff000009169000
[ 2.769920] x21: ffff800079060810 x20: ffff800078d12600
[ 2.775228] x19: 00000000004f2000 x18: ffffffffffffffff
[ 2.780536] x17: 0000000000000000 x16: 0000000000000000
[ 2.785843] x15: ffff80007897fab0 x14: 00000387000003a6
[ 2.791151] x13: 0000038400000384 x12: 0000000000000028
[ 2.796458] x11: 0101010101010101 x10: 0000000000000000
[ 2.801765] x9 : 00000000010ffff0 x8 : ffff8000789b07c0
[ 2.807073] x7 : 0000000000100000 x6 : 00000000001004f2
[ 2.812380] x5 : 0000000000000000 x4 : 0000000000000010
[ 2.817688] x3 : 0000000000000000 x2 : d1022ccae126e900
[ 2.822996] x1 : ffff8000791327c0 x0 : 0000000000000000
[ 2.828303] Call trace:
[ 2.830750] drm_gem_cma_create+0x68/0x128
[ 2.834842] drm_gem_cma_dumb_create+0x40/0xa8
[ 2.839283] drm_mode_create_dumb+0x94/0xb0
[ 2.843465] drm_client_framebuffer_create+0x90/0x1f8
[ 2.848511] drm_fb_helper_generic_probe+0x4c/0x238
[ 2.853385] __drm_fb_helper_initial_config_and_unlock+0x1e0/0x3a0
[ 2.859557] drm_fb_helper_fbdev_setup+0xcc/0x1c8
[ 2.864255] drm_fbdev_cma_init+0x9c/0xc8
[ 2.868260] drm_fb_cma_fbdev_init+0xc/0x20
[ 2.872441] sun4i_framebuffer_init+0x48/0x58
[ 2.876793] sun4i_drv_bind+0x180/0x1d0
[ 2.880627] try_to_bring_up_master+0x144/0x1a8
[ 2.885153] component_add+0x98/0x160
[ 2.888811] sun8i_mixer_probe+0x18/0x20
[ 2.892731] platform_drv_probe+0x50/0xa8
[ 2.896736] really_probe+0x1fc/0x290
[ 2.900395] driver_probe_device+0x58/0x100
[ 2.904573] __device_attach_driver+0x9c/0xf8
[ 2.908925] bus_for_each_drv+0x70/0xc8
[ 2.912757] __device_attach+0xdc/0x138
[ 2.916588] device_initial_probe+0x10/0x18
[ 2.920766] bus_probe_device+0x94/0xa0
[ 2.924599] deferred_probe_work_func+0x6c/0xa0
[ 2.929128] process_one_work+0x1c8/0x318
[ 2.933134] worker_thread+0x234/0x428
[ 2.936880] kthread+0xf8/0x128
[ 2.940020] ret_from_fork+0x10/0x18
[ 2.943591] ---[ end trace 7f686a1ed4dfbdee ]---
[ 2.949730] sun4i-drm display-engine:
[drm:drm_fb_helper_fbdev_setup] *ERROR* Failed to set fbdev
configuration
[ 2.959846] sun4i-drm display-engine: Couldn't create our framebuffer
[ 2.966492] sun4i-drm display-engine: master bind failed: -12
[ 2.972352] sun8i-mixer: probe of 1200000.mixer failed with error -12
[ 2.980094] sun4i-usb-phy 1c19400.phy: Linked as a consumer to regulator.22
[ 2.988807] ehci-platform 1c1b000.usb: EHCI Host Controller
[ 2.994429] ehci-platform 1c1b000.usb: new USB bus registered,
assigned bus number 3
[ 3.002709] ehci-platform 1c1b000.usb: irq 16, io mem 0x01c1b000
[ 3.022268] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[ 3.029045] hub 3-0:1.0: USB hub found
[ 3.032841] hub 3-0:1.0: 1 port detected
[ 3.038440] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[ 3.045089] ohci-platform 1c1b400.usb: new USB bus registered,
assigned bus number 4
[ 3.053135] ohci-platform 1c1b400.usb: irq 17, io mem 0x01c1b400
[ 3.122925] hub 4-0:1.0: USB hub found
[ 3.126713] hub 4-0:1.0: 1 port detected
[ 3.132346] usb_phy_generic usb_phy_generic.2.auto:
usb_phy_generic.2.auto supply vcc not found, using dummy regulator
[ 3.143150] usb_phy_generic usb_phy_generic.2.auto: Linked as a
consumer to regulator.0
[ 3.151793] musb-hdrc musb-hdrc.3.auto: MUSB HDRC host driver
[ 3.157559] musb-hdrc musb-hdrc.3.auto: new USB bus registered,
assigned bus number 5
[ 3.166017] hub 5-0:1.0: USB hub found
[ 3.169808] hub 5-0:1.0: 1 port detected
[ 3.174817] sun6i-rtc 1f00000.rtc: setting system clock to
1970-01-01 00:00:09 UTC (9)
[ 3.183177] vcc-wifi-io: disabling
[ 3.186642] cpvdd: disabling
[ 3.189573] ALSA device list:
[ 3.192551] No soundcards found.
[ 3.196433] Waiting for root device /dev/mmcblk0p2...
[ 3.374265] usb 3-1: new high-speed USB device number 2 using ehci-platform
[ 3.535499] hub 3-1:1.0: USB hub found
[ 3.539377] hub 3-1:1.0: 4 ports detected
More information about the dri-devel
mailing list