[PATCH v2 4/7] drm/i2c: tda998x: convert to bridge driver
Russell King
rmk+kernel at armlinux.org.uk
Mon Jul 30 16:42:21 UTC 2018
Convert tda998x to a bridge driver with built-in encoder support for
compatibility with existing component drivers.
Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
---
drivers/gpu/drm/i2c/tda998x_drv.c | 154 +++++++++++++++++++-------------------
1 file changed, 79 insertions(+), 75 deletions(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 843078e9fbf3..1ea62052f3e0 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -69,6 +69,7 @@ struct tda998x_priv {
bool edid_delay_active;
struct drm_encoder encoder;
+ struct drm_bridge bridge;
struct drm_connector connector;
struct tda998x_audio_port audio_port[2];
@@ -79,9 +80,10 @@ struct tda998x_priv {
#define conn_to_tda998x_priv(x) \
container_of(x, struct tda998x_priv, connector)
-
#define enc_to_tda998x_priv(x) \
container_of(x, struct tda998x_priv, encoder)
+#define bridge_to_tda998x_priv(x) \
+ container_of(x, struct tda998x_priv, bridge)
/* The TDA9988 series of devices use a paged register scheme.. to simplify
* things we encode the page # in upper bits of the register #. To read/
@@ -1262,7 +1264,7 @@ tda998x_connector_best_encoder(struct drm_connector *connector)
{
struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
- return &priv->encoder;
+ return priv->bridge.encoder;
}
static
@@ -1292,15 +1294,32 @@ static int tda998x_connector_init(struct tda998x_priv *priv,
if (ret)
return ret;
- drm_mode_connector_attach_encoder(&priv->connector, &priv->encoder);
+ drm_mode_connector_attach_encoder(&priv->connector,
+ priv->bridge.encoder);
return 0;
}
-/* DRM encoder functions */
+/* DRM bridge functions */
+
+static int tda998x_bridge_attach(struct drm_bridge *bridge)
+{
+ struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
+
+ return tda998x_connector_init(priv, bridge->dev);
+}
+
+static void tda998x_bridge_detach(struct drm_bridge *bridge)
+{
+ struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
+
+ drm_connector_cleanup(&priv->connector);
+}
-static void tda998x_enable(struct tda998x_priv *priv)
+static void tda998x_bridge_enable(struct drm_bridge *bridge)
{
+ struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
+
if (!priv->is_on) {
/* enable video ports, audio will be enabled later */
reg_write(priv, REG_ENA_VP_0, 0xff);
@@ -1315,8 +1334,10 @@ static void tda998x_enable(struct tda998x_priv *priv)
}
}
-static void tda998x_disable(struct tda998x_priv *priv)
+static void tda998x_bridge_disable(struct drm_bridge *bridge)
{
+ struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
+
if (!priv->is_on) {
/* disable video ports */
reg_write(priv, REG_ENA_VP_0, 0x00);
@@ -1327,29 +1348,11 @@ static void tda998x_disable(struct tda998x_priv *priv)
}
}
-static void tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
+static void tda998x_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
{
- struct tda998x_priv *priv = enc_to_tda998x_priv(encoder);
- bool on;
-
- /* we only care about on or off: */
- on = mode == DRM_MODE_DPMS_ON;
-
- if (on == priv->is_on)
- return;
-
- if (on)
- tda998x_enable(priv);
- else
- tda998x_disable(priv);
-}
-
-static void
-tda998x_encoder_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct tda998x_priv *priv = enc_to_tda998x_priv(encoder);
+ struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
u16 ref_pix, ref_line, n_pix, n_line;
u16 hs_pix_s, hs_pix_e;
u16 vs1_pix_s, vs1_pix_e, vs1_line_s, vs1_line_e;
@@ -1556,8 +1559,18 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
mutex_unlock(&priv->audio_mutex);
}
+static const struct drm_bridge_funcs tda998x_bridge_funcs = {
+ .attach = tda998x_bridge_attach,
+ .detach = tda998x_bridge_detach,
+ .disable = tda998x_bridge_disable,
+ .mode_set = tda998x_bridge_mode_set,
+ .enable = tda998x_bridge_enable,
+};
+
static void tda998x_destroy(struct tda998x_priv *priv)
{
+ drm_bridge_remove(&priv->bridge);
+
/* disable all IRQs and free the IRQ handler */
cec_write(priv, REG_CEC_RXSHPDINTENA, 0);
reg_clear(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
@@ -1650,6 +1663,7 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
mutex_init(&priv->mutex); /* protect the page access */
mutex_init(&priv->audio_mutex); /* protect access from audio thread */
mutex_init(&priv->edid_mutex);
+ INIT_LIST_HEAD(&priv->bridge.list);
init_waitqueue_head(&priv->edid_delay_waitq);
timer_setup(&priv->edid_delay_timer, tda998x_edid_delay_done, 0);
INIT_WORK(&priv->detect_work, tda998x_detect_work);
@@ -1810,43 +1824,23 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
tda998x_set_config(priv, client->dev.platform_data);
}
+ priv->bridge.funcs = &tda998x_bridge_funcs;
+ priv->bridge.of_node = dev->of_node;
+
+ drm_bridge_add(&priv->bridge);
+
return 0;
fail:
- /* if encoder_init fails, the encoder slave is never registered,
- * so cleanup here:
- */
- i2c_unregister_device(priv->cec);
- if (priv->cec_notify)
- cec_notifier_put(priv->cec_notify);
- if (client->irq)
- free_irq(client->irq, priv);
+ tda998x_destroy(priv);
err_irq:
return ret;
}
-static void tda998x_encoder_prepare(struct drm_encoder *encoder)
-{
- tda998x_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
-}
-
-static void tda998x_encoder_commit(struct drm_encoder *encoder)
-{
- tda998x_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
-}
-
-static const struct drm_encoder_helper_funcs tda998x_encoder_helper_funcs = {
- .dpms = tda998x_encoder_dpms,
- .prepare = tda998x_encoder_prepare,
- .commit = tda998x_encoder_commit,
- .mode_set = tda998x_encoder_mode_set,
-};
+/* DRM encoder functions */
static void tda998x_encoder_destroy(struct drm_encoder *encoder)
{
- struct tda998x_priv *priv = enc_to_tda998x_priv(encoder);
-
- tda998x_destroy(priv);
drm_encoder_cleanup(encoder);
}
@@ -1854,20 +1848,12 @@ static const struct drm_encoder_funcs tda998x_encoder_funcs = {
.destroy = tda998x_encoder_destroy,
};
-static int tda998x_bind(struct device *dev, struct device *master, void *data)
+static int tda998x_encoder_init(struct device *dev, struct drm_device *drm)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct drm_device *drm = data;
- struct tda998x_priv *priv;
+ struct tda998x_priv *priv = dev_get_drvdata(dev);
u32 crtcs = 0;
int ret;
- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- dev_set_drvdata(dev, priv);
-
if (dev->of_node)
crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
@@ -1879,35 +1865,53 @@ static int tda998x_bind(struct device *dev, struct device *master, void *data)
priv->encoder.possible_crtcs = crtcs;
- ret = tda998x_create(client, priv);
- if (ret)
- return ret;
-
- drm_encoder_helper_add(&priv->encoder, &tda998x_encoder_helper_funcs);
ret = drm_encoder_init(drm, &priv->encoder, &tda998x_encoder_funcs,
DRM_MODE_ENCODER_TMDS, NULL);
if (ret)
goto err_encoder;
- ret = tda998x_connector_init(priv, drm);
+ ret = drm_bridge_attach(&priv->encoder, &priv->bridge, NULL);
if (ret)
- goto err_connector;
+ goto err_bridge;
return 0;
-err_connector:
+err_bridge:
drm_encoder_cleanup(&priv->encoder);
err_encoder:
- tda998x_destroy(priv);
return ret;
}
+static int tda998x_bind(struct device *dev, struct device *master, void *data)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct drm_device *drm = data;
+ struct tda998x_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+
+ ret = tda998x_create(client, priv);
+ if (ret)
+ return ret;
+
+ ret = tda998x_encoder_init(dev, drm);
+ if (ret) {
+ tda998x_destroy(priv);
+ return ret;
+ }
+ return 0;
+}
+
static void tda998x_unbind(struct device *dev, struct device *master,
void *data)
{
struct tda998x_priv *priv = dev_get_drvdata(dev);
- drm_connector_cleanup(&priv->connector);
drm_encoder_cleanup(&priv->encoder);
tda998x_destroy(priv);
}
--
2.7.4
More information about the dri-devel
mailing list