[RFC 2/2] ARM: dts: imx6sl: Convert gpc to new bindings

[Leonard Crestez]

With old bindings imx_gpc_onecell_data always sets num_domains to 2 so
the DISPMIX domain can't actually be referenced. The pd is still defined
and pm core shuts it down as "unused" so display can't work.

Converting to new gpc bindings by adding pgc nodes, also reference
referencing the newly-defined &pu_disp domain from &lcdif.

Signed-off-by: Leonard Crestez <leonard.crestez at nxp.com>
---
 arch/arm/boot/dts/imx6sl.dtsi | 35 ++++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)

There are erratas regarding dispmix on 6sl so this might be wrong

diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index ab6a7e2e7e8f..9982874fa39e 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -694,14 +694,42 @@
 				reg = <0x020dc000 0x4000>;
 				interrupt-controller;
 				#interrupt-cells = <3>;
 				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&intc>;
-				pu-supply = <&reg_pu>;
-				clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
-					 <&clks IMX6SL_CLK_GPU2D_PODF>;
+				clocks = <&clks IMX6SL_CLK_IPG>;
+				clock-names = "ipg";
 				#power-domain-cells = <1>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain at 0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_pu: power-domain at 1 {
+						reg = <1>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_pu>;
+						clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
+						         <&clks IMX6SL_CLK_GPU2D_PODF>;
+					};
+
+					pd_disp: power-domain at 2 {
+						reg = <2>;
+						#power-domain-cells = <0>;
+						clocks = <&clks IMX6SL_CLK_IPG>,
+							 <&clks IMX6SL_CLK_LCDIF_AXI>,
+							 <&clks IMX6SL_CLK_LCDIF_PIX>,
+							 <&clks IMX6SL_CLK_EPDC_AXI>,
+							 <&clks IMX6SL_CLK_EPDC_PIX>,
+							 <&clks IMX6SL_CLK_PXP_AXI>;
+					};
+				};
 			};
 
 			gpr: iomuxc-gpr at 20e0000 {
 				compatible = "fsl,imx6sl-iomuxc-gpr",
 					     "fsl,imx6q-iomuxc-gpr", "syscon";
@@ -752,10 +780,11 @@
 				clocks = <&clks IMX6SL_CLK_LCDIF_PIX>,
 					 <&clks IMX6SL_CLK_LCDIF_AXI>,
 					 <&clks IMX6SL_CLK_DUMMY>;
 				clock-names = "pix", "axi", "disp_axi";
 				status = "disabled";
+				power-domains = <&pd_disp>;
 			};
 
 			dcp: dcp at 20fc000 {
 				compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
 				reg = <0x020fc000 0x4000>;
-- 
2.17.0