[PATCH 06/21] drm/omap: encoder-tfp410: Convert to the GPIO descriptors API

Sebastian Reichel sre at kernel.org
Mon Jun 11 14:10:36 UTC 2018


Hi,

On Wed, Jun 06, 2018 at 12:36:35PM +0300, Laurent Pinchart wrote:
> The GPIO descriptor API is favoured over the plain GPIO API for consumer
> drivers. Using it simplifies the driver code.
> 
> As the descriptor API handles the active-low flag internally we need to
> invert the polarity of all GPIO operations in the driver.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> ---

Reviewed-by: Sebastian Reichel <sebastian.reichel at collabora.co.uk>

-- Sebastian

>  drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c | 51 ++++++-----------------
>  1 file changed, 13 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c b/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
> index c7398428228f..b91e45c0bfdd 100644
> --- a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
> +++ b/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
> @@ -13,14 +13,13 @@
>  #include <linux/module.h>
>  #include <linux/platform_device.h>
>  #include <linux/slab.h>
> -#include <linux/of_gpio.h>
>  
>  #include "../dss/omapdss.h"
>  
>  struct panel_drv_data {
>  	struct omap_dss_device dssdev;
>  
> -	int pd_gpio;
> +	struct gpio_desc *pd_gpio;
>  
>  	struct videomode vm;
>  };
> @@ -57,8 +56,8 @@ static int tfp410_enable(struct omap_dss_device *dssdev)
>  	if (r)
>  		return r;
>  
> -	if (gpio_is_valid(ddata->pd_gpio))
> -		gpio_set_value_cansleep(ddata->pd_gpio, 1);
> +	if (ddata->pd_gpio)
> +		gpiod_set_value_cansleep(ddata->pd_gpio, 0);
>  
>  	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
>  
> @@ -73,8 +72,8 @@ static void tfp410_disable(struct omap_dss_device *dssdev)
>  	if (!omapdss_device_is_enabled(dssdev))
>  		return;
>  
> -	if (gpio_is_valid(ddata->pd_gpio))
> -		gpio_set_value_cansleep(ddata->pd_gpio, 0);
> +	if (ddata->pd_gpio)
> +		gpiod_set_value_cansleep(ddata->pd_gpio, 0);
>  
>  	src->ops->disable(src);
>  
> @@ -119,30 +118,11 @@ static const struct omap_dss_device_ops tfp410_ops = {
>  	.set_timings	= tfp410_set_timings,
>  };
>  
> -static int tfp410_probe_of(struct platform_device *pdev)
> -{
> -	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
> -	struct device_node *node = pdev->dev.of_node;
> -	int gpio;
> -
> -	gpio = of_get_named_gpio(node, "powerdown-gpios", 0);
> -
> -	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
> -		ddata->pd_gpio = gpio;
> -	} else {
> -		if (gpio != -EPROBE_DEFER)
> -			dev_err(&pdev->dev, "failed to parse PD gpio\n");
> -		return gpio;
> -	}
> -
> -	return 0;
> -}
> -
>  static int tfp410_probe(struct platform_device *pdev)
>  {
>  	struct panel_drv_data *ddata;
>  	struct omap_dss_device *dssdev;
> -	int r;
> +	struct gpio_desc *gpio;
>  
>  	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
>  	if (!ddata)
> @@ -150,20 +130,15 @@ static int tfp410_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, ddata);
>  
> -	r = tfp410_probe_of(pdev);
> -	if (r)
> -		return r;
> -
> -	if (gpio_is_valid(ddata->pd_gpio)) {
> -		r = devm_gpio_request_one(&pdev->dev, ddata->pd_gpio,
> -				GPIOF_OUT_INIT_LOW, "tfp410 PD");
> -		if (r) {
> -			dev_err(&pdev->dev, "Failed to request PD GPIO %d\n",
> -					ddata->pd_gpio);
> -			return r;
> -		}
> +	/* Powerdown GPIO */
> +	gpio = devm_gpiod_get_optional(&pdev->dev, "powerdown", GPIOD_OUT_HIGH);
> +	if (IS_ERR(gpio)) {
> +		dev_err(&pdev->dev, "failed to parse powerdown gpio\n");
> +		return PTR_ERR(gpio);
>  	}
>  
> +	ddata->pd_gpio = gpio;
> +
>  	dssdev = &ddata->dssdev;
>  	dssdev->ops = &tfp410_ops;
>  	dssdev->dev = &pdev->dev;
> -- 
> Regards,
> 
> Laurent Pinchart
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20180611/a98e9163/attachment-0001.sig>


More information about the dri-devel mailing list