[PATCH 13/28] drm/mediatek: add connection from RDMA0 to DSI3
CK Hu
ck.hu at mediatek.com
Wed Jun 13 05:45:51 UTC 2018
Hi, Stu:
Two inline comment.
On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote:
> This patch add the connection from RDMA0 to DSI3
>
> Signed-off-by: Stu Hsieh <stu.hsieh at mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 4 ++++
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +-
> 2 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> index c08aed8dae44..fed1b5704355 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> @@ -83,6 +83,7 @@
> #define GAMMA_MOUT_EN_RDMA1 0x1
> #define RDMA0_MOUT_DPI0 0x2
> #define RDMA0_MOUT_DSI2 0x4
> +#define RDMA0_MOUT_DSI3 0x5
Usually, each bit of a mout register represent a output enable. Is this
value 0x5 is a correct value?
> #define RDMA1_MOUT_DPI0 0x2
> #define DPI0_SEL_IN_RDMA1 0x1
> #define COLOR1_SEL_IN_OVL1 0x1
> @@ -164,6 +165,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
> } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI2) {
> *addr = DISP_REG_CONFIG_DISP_RDMA0_MOUT_EN;
> value = RDMA0_MOUT_DSI2;
> + } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI3) {
> + *addr = DISP_REG_CONFIG_DISP_RDMA0_MOUT_EN;
> + value = RDMA0_MOUT_DSI3;
> } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> value = RDMA1_MOUT_DPI0;
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index fe6fdc021fc7..22f4c72fa785 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -228,7 +228,7 @@ static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
> [DDP_COMPONENT_DSI0] = { MTK_DSI, 0, NULL },
> [DDP_COMPONENT_DSI1] = { MTK_DSI, 1, NULL },
> [DDP_COMPONENT_DSI2] = { MTK_DSI, 2, NULL },
> - [DDP_COMPONENT_DSI2] = { MTK_DSI, 3, NULL },
> + [DDP_COMPONENT_DSI3] = { MTK_DSI, 3, NULL },
I think this is not related to this patch.
Regards,
CK
> [DDP_COMPONENT_GAMMA] = { MTK_DISP_GAMMA, 0, &ddp_gamma },
> [DDP_COMPONENT_OD0] = { MTK_DISP_OD, 0, &ddp_od },
> [DDP_COMPONENT_OD1] = { MTK_DISP_OD, 1, &ddp_od },
More information about the dri-devel
mailing list