[PATCH 18/28] drm/mediatek: add connection from RDMA2 to DPI0

CK Hu ck.hu at mediatek.com
Wed Jun 13 07:07:38 UTC 2018


Hi, Stu:

On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote:
> This patch add the connection from RDMA2 to DPI0
> 
> Signed-off-by: Stu Hsieh <stu.hsieh at mediatek.com>

Reviewed-by: CK Hu <ck.hu at mediatek.com>

> ---
>  drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> index a5cee4b7f908..31a0832ef9ec 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> @@ -31,6 +31,7 @@
>  #define DISP_REG_CONFIG_DSIE_SEL_IN		0x0a4
>  #define DISP_REG_CONFIG_DSIO_SEL_IN		0x0a8
>  #define DISP_REG_CONFIG_DPI_SEL_IN		0x0ac
> +#define DISP_REG_CONFIG_DISP_RDMA2_SOUT		0x0b8
>  #define DISP_REG_CONFIG_DISP_RDMA0_MOUT_EN	0x0c4
>  #define DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN	0x0c8
>  #define DISP_REG_CONFIG_MMSYS_CG_CON0		0x100
> @@ -91,7 +92,9 @@
>  #define RDMA1_MOUT_DSI3			0x5
>  #define RDMA1_MOUT_DPI0			0x2
>  #define RDMA1_MOUT_DPI1			0x3
> +#define RDMA2_MOUT_DPI0			0x2
>  #define DPI0_SEL_IN_RDMA1		0x1
> +#define DPI0_SEL_IN_RDMA2		0x3
>  #define DPI1_SEL_IN_RDMA1		(0x1 << 8)
>  #define DSI1_SEL_IN_RDMA1		0x1
>  #define DSI2_SEL_IN_RDMA1		(0x1 << 16)
> @@ -193,6 +196,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
>  	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
>  		*addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
>  		value = RDMA1_MOUT_DPI1;
> +	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) {
> +		*addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
> +		value = RDMA2_MOUT_DPI0;
>  	} else {
>  		value = 0;
>  	}
> @@ -224,6 +230,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
>  	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI3) {
>  		*addr = DISP_REG_CONFIG_DSIO_SEL_IN;
>  		value = DSI3_SEL_IN_RDMA1;
> +	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) {
> +		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
> +		value = DPI0_SEL_IN_RDMA2;
>  	} else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
>  		*addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
>  		value = COLOR1_SEL_IN_OVL1;




More information about the dri-devel mailing list