[PATCH v2 20/27] drm/sun4i: Don't change clock bits in DW HDMI PHY driver

[Jernej Skrabec]

DW HDMI PHY driver and PHY clock driver share same registers. Make sure
that DW HDMI PHY setup code doesn't change any clock related bits and
set them to 0 during initialization.

Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
---
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h  |  2 +-
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 12 +++++++++++-
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index 79154f0f674a..3ba71aff92fc 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -98,7 +98,7 @@
 #define SUN8I_HDMI_PHY_PLL_CFG1_LDO2_EN		BIT(29)
 #define SUN8I_HDMI_PHY_PLL_CFG1_LDO1_EN		BIT(28)
 #define SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33	BIT(27)
-#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL	BIT(26)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK	BIT(26)
 #define SUN8I_HDMI_PHY_PLL_CFG1_PLLEN		BIT(25)
 #define SUN8I_HDMI_PHY_PLL_CFG1_LDO_VSET(x)	((x) << 22)
 #define SUN8I_HDMI_PHY_PLL_CFG1_UNKNOWN(x)	((x) << 20)
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 966688f04741..cd07ceb71601 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -183,7 +183,13 @@ static int sun8i_hdmi_phy_config_h3(struct dw_hdmi *hdmi,
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
 			   SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK, 0);
 
-	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, pll_cfg1_init);
+	/*
+	 * NOTE: We have to be careful not to overwrite PHY parent
+	 * clock selection bit and clock divider.
+	 */
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
+			   (u32)~SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK,
+			   pll_cfg1_init);
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG,
 			   (u32)~SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK,
 			   pll_cfg2_init);
@@ -352,6 +358,10 @@ static void sun8i_hdmi_phy_init_h3(struct sun8i_hdmi_phy *phy)
 			   SUN8I_HDMI_PHY_ANA_CFG3_SCLEN |
 			   SUN8I_HDMI_PHY_ANA_CFG3_SDAEN);
 
+	/* reset PLL clock configuration */
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, 0);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG, 0);
+
 	/* set HW control of CEC pins */
 	regmap_write(phy->regs, SUN8I_HDMI_PHY_CEC_REG, 0);
 
-- 
2.17.1