[PATCH 14/28] drm/mediatek: add connection from RDMA1 to DPI1

[Stu Hsieh]

Hi, CK:

On Wed, 2018-06-13 at 14:13 +0800, CK Hu wrote:
> Hi, Stu:
> 
> On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote:
> > This patch add the connection from RDMA1 to DPI1
> > 
> > Signed-off-by: Stu Hsieh <stu.hsieh at mediatek.com>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > index fed1b5704355..4abd5dabeccf 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > @@ -85,7 +85,9 @@
> >  #define RDMA0_MOUT_DSI2			0x4
> >  #define RDMA0_MOUT_DSI3			0x5
> >  #define RDMA1_MOUT_DPI0			0x2
> > +#define RDMA1_MOUT_DPI1			0x3
> 
> Usually, each bit of a mout register represent a output enable. Is this
> value 0x3 a correct value?
> 
> Regards,
> CK
> 
In HW CONFIG SPEC show as following

Bit(s)	Name			Description
2:0	DISP_PATH1_SOUT_SEL_IN	0 : Output to DSI0
				1:  Ooutput to DSI1
				2:  Ooutput to DPI
				3:  Ooutput to DPI1
				4:  Ooutput to DSI2
				5:  Ooutput to DSI3
				6 : reserved
				7:  Ooutput to DISP_UFOE

So, 0x3 is correct value

Regard,
Stu


> >  #define DPI0_SEL_IN_RDMA1		0x1
> > +#define DPI1_SEL_IN_RDMA1		(0x1 << 8)
> >  #define COLOR1_SEL_IN_OVL1		0x1
> >  
> >  #define OVL_MOUT_EN_RDMA		0x1
> > @@ -171,6 +173,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
> >  	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> >  		*addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> >  		value = RDMA1_MOUT_DPI0;
> > +	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
> > +		*addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> > +		value = RDMA1_MOUT_DPI1;
> >  	} else {
> >  		value = 0;
> >  	}
> > @@ -190,6 +195,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
> >  	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> >  		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
> >  		value = DPI0_SEL_IN_RDMA1;
> > +	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
> > +		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > +		value = DPI1_SEL_IN_RDMA1;
> >  	} else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
> >  		*addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
> >  		value = COLOR1_SEL_IN_OVL1;
> 
>