[PATCH 19/28] drm/mediatek: add connection from RDMA2 to DPI1

Stu Hsieh stu.hsieh at mediatek.com
Wed Jun 13 08:01:02 UTC 2018


Hi, CK:


On Wed, 2018-06-13 at 15:13 +0800, CK Hu wrote:
> Hi, Stu:
> 
> On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote:
> > This patch add the connection from RDMA2 to DPI1
> > 
> > Signed-off-by: Stu Hsieh <stu.hsieh at mediatek.com>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > index 31a0832ef9ec..2d883815d79c 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > @@ -93,9 +93,11 @@
> >  #define RDMA1_MOUT_DPI0			0x2
> >  #define RDMA1_MOUT_DPI1			0x3
> >  #define RDMA2_MOUT_DPI0			0x2
> > +#define RDMA2_MOUT_DPI1			0x3
> 
> Usually, each bit of a mout register represent a output enable. Is this
> value 0x3 a correct value?
> 
> Regards,
> CK
> 
In HW CONFIG SPEC or MT2712_E2_MMSYS_Change_note show as following:

Bit(s)	Name			Description
2:0	DISP_RDMA2_SOUT_SEL_IN	0: output to dsi0
				1: outptu to dsi1
				2: output to dpi0
				3: output to dpi1
				4: output to dsi2
				5: output to dsi3

So, 0x3 is correct value.

Regard,
Stu

> >  #define DPI0_SEL_IN_RDMA1		0x1
> >  #define DPI0_SEL_IN_RDMA2		0x3
> >  #define DPI1_SEL_IN_RDMA1		(0x1 << 8)
> > +#define DPI1_SEL_IN_RDMA2		(0x3 << 8)
> >  #define DSI1_SEL_IN_RDMA1		0x1
> >  #define DSI2_SEL_IN_RDMA1		(0x1 << 16)
> >  #define DSI3_SEL_IN_RDMA1		(0x1 << 16)
> > @@ -199,6 +201,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
> >  	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) {
> >  		*addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
> >  		value = RDMA2_MOUT_DPI0;
> > +	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) {
> > +		*addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
> > +		value = RDMA2_MOUT_DPI1;
> >  	} else {
> >  		value = 0;
> >  	}
> > @@ -233,6 +238,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
> >  	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) {
> >  		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
> >  		value = DPI0_SEL_IN_RDMA2;
> > +	} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) {
> > +		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > +		value = DPI1_SEL_IN_RDMA2;
> >  	} else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
> >  		*addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
> >  		value = COLOR1_SEL_IN_OVL1;
> 
> 




More information about the dri-devel mailing list