[PATCH v3 3/9] drm/exynos: enable out_bridge in exynos_dsi_enable()
Maciej Purski
m.purski at samsung.com
Tue Jun 19 08:19:24 UTC 2018
As the out bridge will not be enabled directly by the framework,
it should be enabled by DSI. Exynos_dsi_enable() should handle a case,
when there is an out_bridge connected as a DSI peripheral.
Signed-off-by: Maciej Purski <m.purski at samsung.com>
---
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 34 +++++++++++++++++++++------------
1 file changed, 22 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index c0408c0..8aa7ace 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1386,25 +1386,33 @@ static void exynos_dsi_enable(struct drm_encoder *encoder)
dsi->state |= DSIM_STATE_ENABLED;
- ret = drm_panel_prepare(dsi->panel);
- if (ret < 0) {
- dsi->state &= ~DSIM_STATE_ENABLED;
- pm_runtime_put_sync(dsi->dev);
- return;
+ if (dsi->panel) {
+ ret = drm_panel_prepare(dsi->panel);
+ if (ret < 0) {
+ dsi->state &= ~DSIM_STATE_ENABLED;
+ return;
+ }
}
+ if (dsi->out_bridge)
+ drm_bridge_pre_enable(dsi->out_bridge);
+
exynos_dsi_set_display_mode(dsi);
exynos_dsi_set_display_enable(dsi, true);
- ret = drm_panel_enable(dsi->panel);
- if (ret < 0) {
- dsi->state &= ~DSIM_STATE_ENABLED;
- exynos_dsi_set_display_enable(dsi, false);
- drm_panel_unprepare(dsi->panel);
- pm_runtime_put_sync(dsi->dev);
- return;
+ if (dsi->panel) {
+ ret = drm_panel_enable(dsi->panel);
+ if (ret < 0) {
+ dsi->state &= ~DSIM_STATE_ENABLED;
+ exynos_dsi_set_display_enable(dsi, false);
+ drm_panel_unprepare(dsi->panel);
+ return;
+ }
}
+ if (dsi->out_bridge)
+ drm_bridge_enable(dsi->out_bridge);
+
dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE;
}
@@ -1418,8 +1426,10 @@ static void exynos_dsi_disable(struct drm_encoder *encoder)
dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE;
drm_panel_disable(dsi->panel);
+ drm_bridge_disable(dsi->out_bridge);
exynos_dsi_set_display_enable(dsi, false);
drm_panel_unprepare(dsi->panel);
+ drm_bridge_post_disable(dsi->out_bridge);
dsi->state &= ~DSIM_STATE_ENABLED;
--
2.7.4
More information about the dri-devel
mailing list