[PATCH v7 00/29] Add support for mediatek SOC MT2712

Daniel Vetter daniel at ffwll.ch
Mon Jun 25 08:47:40 UTC 2018


On Wed, Jun 20, 2018 at 04:19:02PM +0800, Stu Hsieh wrote:
> This patch add support for the Mediatek MT2712 DISP subsystem.
> MT2712 is base on MT8173, there are some difference as following:
> MT2712 support three disp output(two ovl and one rdma)
> 
> Change in v6:
> - Update commit message for the patch
>   "drm/mediatek: Update the definition of connection from RDMA1 to DPI0"

Just a drive-by comment on the mediatek driver:

As far as I can see mtk_drm_gem.c reimplements the cma helpers as a
copypaste job. Any reasons why you're not using the normal cma helpers?

Thanks, Daniel
> 
> Stu Hsieh (29):
>   drm/mediatek: update dt-bindings for mt2712
>   drm/mediatek: support maximum 64 mutex mod
>   drm/mediatek: add ddp component AAL1
>   drm/mediatek: add ddp component OD1
>   drm/mediatek: add ddp component PWM1
>   drm/mediatek: add ddp component PWM2
>   drm/mediatek: add component DPI1
>   drm/mediatek: add component DSI2
>   drm/mediatek: add component DSI3
>   drm/mediatek: add the DSI1 for component init condition
>   drm/mediatek: add connection from OD1 to RDMA1
>   drm/mediatek: Update the definition of connection from RDMA1 to DPI0
>   drm/mediatek: add connection from RDMA0 to DPI0
>   drm/mediatek: add connection from RDMA0 to DSI2
>   drm/mediatek: add connection from RDMA0 to DSI3
>   drm/mediatek: add connection from RDMA1 to DPI1
>   drm/mediatek: add connection from RDMA1 to DSI1
>   drm/mediatek: add connection from RDMA1 to DSI2
>   drm/mediatek: add connection from RDMA1 to DSI3
>   drm/mediatek: add connection from RDMA2 to DPI0
>   drm/mediatek: add connection from RDMA2 to DPI1
>   drm/mediatek: add connection from RDMA2 to DSI1
>   drm/mediatek: add connection from RDMA2 to DSI2
>   drm/mediatek: add connection from RDMA2 to DSI3
>   drm/mediatek: add DPI1 support for mutex
>   drm/mediatek: add DSI2 support for mutex
>   drm/mediatek: add DSI3 support for mutex
>   drm/mediatek: add third ddp path
>   drm/mediatek: Add support for mediatek SOC MT2712
> 
>  .../bindings/display/mediatek/mediatek,disp.txt    |   2 +-
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c            |   3 +
>  drivers/gpu/drm/mediatek/mtk_drm_ddp.c             | 235 ++++++++++++++++++---
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c        |  15 +-
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h        |  10 +-
>  drivers/gpu/drm/mediatek/mtk_drm_drv.c             |  47 ++++-
>  drivers/gpu/drm/mediatek/mtk_drm_drv.h             |   5 +-
>  7 files changed, 274 insertions(+), 43 deletions(-)
> 
> -- 
> 2.12.5
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch


More information about the dri-devel mailing list