[PATCH v3 12/24] drm/sun4i: Don't check for panel or bridge on TV TCONs

[Jernej Skrabec]

TV TCONs are always connected to TV or HDMI encoder, so it doesn't make
sense to check if panel or bridge is connected to them.

Check if TCON has channel 0 and only then check for connected panel or
bridges.

Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 761687ebacba..a41c7bb0d557 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -1178,13 +1178,19 @@ static const struct component_ops sun4i_tcon_ops = {
 static int sun4i_tcon_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
+	const struct sun4i_tcon_quirks *quirks;
 	struct drm_bridge *bridge;
 	struct drm_panel *panel;
 	int ret;
 
-	ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge);
-	if (ret == -EPROBE_DEFER)
-		return ret;
+	quirks = of_device_get_match_data(&pdev->dev);
+
+	/* panels and bridges are present only on TCONs with channel 0 */
+	if (quirks->has_channel_0) {
+		ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge);
+		if (ret == -EPROBE_DEFER)
+			return ret;
+	}
 
 	return component_add(&pdev->dev, &sun4i_tcon_ops);
 }
-- 
2.18.0