[PATCH v3 18/24] drm/sun4i: DW HDMI PHY: Add support for second PLL
Jernej Skrabec
jernej.skrabec at siol.net
Mon Jun 25 12:02:58 UTC 2018
Some DW HDMI PHYs, like those found in A64 and R40 SoCs, can select
between two clock parents.
Add code which reads second PLL from DT.
Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
---
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 2 ++
drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 20 +++++++++++++++-----
2 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index 3ba71aff92fc..46a3aa6a53a9 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -147,6 +147,7 @@ struct sun8i_hdmi_phy;
struct sun8i_hdmi_phy_variant {
bool has_phy_clk;
+ bool has_second_pll;
void (*phy_init)(struct sun8i_hdmi_phy *phy);
void (*phy_disable)(struct dw_hdmi *hdmi,
struct sun8i_hdmi_phy *phy);
@@ -160,6 +161,7 @@ struct sun8i_hdmi_phy {
struct clk *clk_mod;
struct clk *clk_phy;
struct clk *clk_pll0;
+ struct clk *clk_pll1;
unsigned int rcal;
struct regmap *regs;
struct reset_control *rst_phy;
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index e56b9e5b1c42..f0877b3f67e7 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -482,10 +482,19 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
goto err_put_clk_mod;
}
+ if (phy->variant->has_second_pll) {
+ phy->clk_pll1 = of_clk_get_by_name(node, "pll-1");
+ if (IS_ERR(phy->clk_pll1)) {
+ dev_err(dev, "Could not get pll-1 clock\n");
+ ret = PTR_ERR(phy->clk_pll1);
+ goto err_put_clk_pll0;
+ }
+ }
+
ret = sun8i_phy_clk_create(phy, dev);
if (ret) {
dev_err(dev, "Couldn't create the PHY clock\n");
- goto err_put_clk_pll0;
+ goto err_put_clk_pll1;
}
clk_prepare_enable(phy->clk_phy);
@@ -528,9 +537,10 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
reset_control_put(phy->rst_phy);
err_disable_clk_phy:
clk_disable_unprepare(phy->clk_phy);
+err_put_clk_pll1:
+ clk_put(phy->clk_pll1);
err_put_clk_pll0:
- if (phy->variant->has_phy_clk)
- clk_put(phy->clk_pll0);
+ clk_put(phy->clk_pll0);
err_put_clk_mod:
clk_put(phy->clk_mod);
err_put_clk_bus:
@@ -551,8 +561,8 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi)
reset_control_put(phy->rst_phy);
- if (phy->variant->has_phy_clk)
- clk_put(phy->clk_pll0);
+ clk_put(phy->clk_pll0);
+ clk_put(phy->clk_pll1);
clk_put(phy->clk_mod);
clk_put(phy->clk_bus);
}
--
2.18.0
More information about the dri-devel
mailing list