[v3 01/10] dt-bindings: mediatek: mmsys: Add support for mfd

[Matthias Brugger]

On 30/04/18 12:30, Lee Jones wrote:
> On Fri, 27 Apr 2018, matthias.bgg at kernel.org wrote:
> 
>> From: Matthias Brugger <mbrugger at suse.com>
>>
>> Add binding description for the mmsys mfd for some Mediatek
>> devices. mmsys has some registers to control clock gates (which is
>> used in the clk driver) and some registers to set the routing and enable
>> the differnet blocks of the display subsystem.
>>
>> Signed-off-by: Matthias Brugger <mbrugger at suse.com>
>> ---
>>  .../bindings/arm/mediatek/mediatek,mmsys.txt       |  2 --
>>  .../bindings/display/mediatek/mediatek,disp.txt    |  2 +-
>>  .../devicetree/bindings/mfd/mediatek,mmsys.txt     | 27 ++++++++++++++++++++++
>>  3 files changed, 28 insertions(+), 3 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/mfd/mediatek,mmsys.txt
>>
>> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
>> index 4eb8bbe15c01..4468345f8b1a 100644
>> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
>> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
>> @@ -6,10 +6,8 @@ The Mediatek mmsys controller provides various clocks to the system.
>>  Required Properties:
>>  
>>  - compatible: Should be one of:
>> -	- "mediatek,mt2701-mmsys", "syscon"
>>  	- "mediatek,mt2712-mmsys", "syscon"
>>  	- "mediatek,mt6797-mmsys", "syscon"
>> -	- "mediatek,mt8173-mmsys", "syscon"
>>  - #clock-cells: Must be 1
>>  
>>  The mmsys controller uses the common clk binding from
>> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
>> index 383183a89164..85a3b4ec06cd 100644
>> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
>> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
>> @@ -9,7 +9,7 @@ function block.
>>  
>>  All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node.
>>  For a description of the MMSYS_CONFIG binding, see
>> -Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt.
>> +Documentation/devicetree/bindings/mfd/mediatek,mmsys.txt
>>  
>>  DISP function blocks
>>  ====================
>> diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mmsys.txt b/Documentation/devicetree/bindings/mfd/mediatek,mmsys.txt
>> new file mode 100644
>> index 000000000000..2331ae16917e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/mediatek,mmsys.txt
>> @@ -0,0 +1,27 @@
>> +MediaTek MMSYS Multifunction Device Driver
> 
> What is "MMSYS"?
> 
> "Multi-Function Driver"s are specific to Linux.
> 
> What actually is the device?
> 

It's includes all the DRM parts of the SoC together with the clocks for the
device. MMSYS IMHO stands for Multi-Media-System.

Regards,
Matthias

>> +MMSYS is a multifunction device with the following sub modules:
>> +- clocks for the multi-media subsystem
>> +- central node for the DRM subsystem.
>> +
>> +This document describes the binding for MFD device. The MFD takes care to initailize
>> +the clock driver and the DRM driver. More info see
>> +Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
>> +
>> +Required properties:
>> +- compatible: Should be one of:
>> +	- "mediatek,mt2701-mmsys", "syscon"
>> +	- "mediatek,mt8173-mmsys", "syscon"
>> +- #clock-cells: Must be 1
>> +
>> +Optional properties:
>> +- power-domains: list of powerdomains needed for the subsystem to work
>> +
>> +Example:
>> +
>> +mmsys: clock-controller at 14000000 {
>> +	compatible = "mediatek,mt8173-mmsys", "syscon";
>> +	reg = <0 0x14000000 0 0x1000>;
>> +	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>> +	#clock-cells = <1>;
>> +};
>