[PATCH 3/8] drm: Add drm_for_each_connector_encoder_ids()
Daniel Vetter
daniel at ffwll.ch
Wed Jun 27 09:08:48 UTC 2018
On Tue, Jun 26, 2018 at 08:47:09PM +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Add a convenience macro for iterating connector->encoder_ids[].
> Isolates the users from the implementation details.
>
> Also use ARRAY_SIZE() when populating the array to avoid spreading
> knowledge about the array size all over.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/drm_connector.c | 22 ++++++++++------------
> drivers/gpu/drm/drm_fb_helper.c | 6 +++---
> drivers/gpu/drm/drm_probe_helper.c | 9 +++++----
> include/drm/drm_connector.h | 11 +++++++++++
> 4 files changed, 29 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 2f9ebddd178e..c43646cb8145 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -321,7 +321,7 @@ int drm_mode_connector_attach_encoder(struct drm_connector *connector,
> if (WARN_ON(connector->encoder))
> return -EINVAL;
>
> - for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
> + for (i = 0; i < ARRAY_SIZE(connector->encoder_ids); i++) {
> if (connector->encoder_ids[i] == 0) {
> connector->encoder_ids[i] = encoder->base.id;
> return 0;
> @@ -1693,6 +1693,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data,
> int encoders_count = 0;
> int ret = 0;
> int copied = 0;
> + u32 encoder_id;
> int i;
> struct drm_mode_modeinfo u_mode;
> struct drm_mode_modeinfo __user *mode_ptr;
> @@ -1708,22 +1709,19 @@ int drm_mode_getconnector(struct drm_device *dev, void *data,
> if (!connector)
> return -ENOENT;
>
> - for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++)
> - if (connector->encoder_ids[i] != 0)
> - encoders_count++;
> + drm_for_each_connector_encoder_ids(connector, encoder_id, i)
> + encoders_count++;
>
> if ((out_resp->count_encoders >= encoders_count) && encoders_count) {
> copied = 0;
> encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr);
> - for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
> - if (connector->encoder_ids[i] != 0) {
> - if (put_user(connector->encoder_ids[i],
> - encoder_ptr + copied)) {
> - ret = -EFAULT;
> - goto out;
> - }
> - copied++;
> +
> + drm_for_each_connector_encoder_ids(connector, encoder_id, i) {
> + if (put_user(encoder_id, encoder_ptr + copied)) {
> + ret = -EFAULT;
> + goto out;
> }
> + copied++;
> }
> }
> out_resp->count_encoders = encoders_count;
> diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
> index 61c39cd75a27..e086b08748f4 100644
> --- a/drivers/gpu/drm/drm_fb_helper.c
> +++ b/drivers/gpu/drm/drm_fb_helper.c
> @@ -2326,12 +2326,12 @@ static bool drm_target_preferred(struct drm_fb_helper *fb_helper,
> static bool connector_crtc_ok(struct drm_connector *connector,
> struct drm_crtc *crtc)
> {
> + u32 encoder_id;
> int i;
>
> - for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
> + drm_for_each_connector_encoder_ids(connector, encoder_id, i) {
> struct drm_encoder *encoder =
> - drm_encoder_find(connector->dev, NULL,
> - connector->encoder_ids[i]);
> + drm_encoder_find(connector->dev, NULL, encoder_id);
>
> if (encoder->possible_crtcs & drm_crtc_mask(crtc))
> return true;
> diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> index 527743394150..0239f76c52fb 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -88,9 +88,9 @@ drm_mode_validate_pipeline(struct drm_display_mode *mode,
> struct drm_connector *connector)
> {
> struct drm_device *dev = connector->dev;
> - uint32_t *ids = connector->encoder_ids;
> enum drm_mode_status ret = MODE_OK;
> - unsigned int i;
> + u32 encoder_id;
> + int i;
>
> /* Step 1: Validate against connector */
> ret = drm_connector_mode_valid(connector, mode);
> @@ -98,8 +98,9 @@ drm_mode_validate_pipeline(struct drm_display_mode *mode,
> return ret;
>
> /* Step 2: Validate against encoders and crtcs */
> - for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
> - struct drm_encoder *encoder = drm_encoder_find(dev, NULL, ids[i]);
> + drm_for_each_connector_encoder_ids(connector, encoder_id, i) {
> + struct drm_encoder *encoder =
> + drm_encoder_find(dev, NULL, encoder_id);
> struct drm_crtc *crtc;
>
> if (!encoder)
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 14ab58ade87f..4a0363f7dd8c 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -1193,4 +1193,15 @@ void drm_connector_list_iter_end(struct drm_connector_list_iter *iter);
> #define drm_for_each_connector_iter(connector, iter) \
> while ((connector = drm_connector_list_iter_next(iter)))
>
> +/**
> + * drm_for_each_connector_encoder_ids - iterate connector encoder_ids[]
&drm_connector.encoder_ids would give you a (fairly direct) link. Just a
nitpick.
Wrt the api: I think including the drm_encoder_find would be useful here -
it's what 2/3 users want anyway, and the ioctl can easily look up the id
again by following encoder->base.id. And then maybe call the function a
bit differently, I think usually we go with
$parent_object_for_each_$iterated_thing, so
drm_connector_for_each_encoder(). There's also the
for_each_$thing_in_$parent_object pattern (used for atomic states), but I
think that's less fitting here.
Apologies for the interface bikeshedding ...
-Daniel
> + * @connector: &struct drm_connector pointer used as cursor
> + * @encoder_id: the encoder ID
> + * @__i: int iteration cursor, for macro-internal use
> + */
> +#define drm_for_each_connector_encoder_ids(connector, encoder_id, __i) \
> + for ((__i) = 0; (__i) < ARRAY_SIZE((connector)->encoder_ids) && \
> + (connector)->encoder_ids[(__i)] != 0; (__i)++) \
> + for_each_if((encoder_id) = (connector)->encoder_ids[(__i)])
> +
> #endif
> --
> 2.16.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list