[PATCH v2 1/7] PCI: Restore config space on runtime resume despite being unbound

[Lukas Wunner]

From: Rafael J. Wysocki <rjw at rjwysocki.net>

We leave PCI devices not bound to a driver in D0 during runtime suspend.
But they may have a parent which is bound and can be transitioned to
D3cold at runtime.  Once the parent goes to D3cold, the unbound child
may go to D3cold as well.  When the child comes out of D3cold, its BARs
are uninitialized and thus inaccessible when a driver tries to probe.
Moreover configuration done during enumeration, e.g. ASPM and MPS, will
be lost.

One example are recent hybrid graphics laptops which cut power to the
discrete GPU when the root port above it goes to ACPI power state D3.
Users may provoke this by unbinding the GPU driver and allowing runtime
PM on the GPU via sysfs:  The PM core will then treat the GPU as
"suspended", which in turn allows the root port to runtime suspend,
causing the power resources listed in its _PR3 object to be powered off.
The GPU's BARs will be uninitialized when a driver later probes it.

Another example are hybrid graphics laptops where the GPU itself (rather
than the root port) is capable of runtime suspending to D3cold.  If the
GPU's integrated HDA controller is not bound and the GPU's driver
decides to runtime suspend to D3cold, the HDA controller's BARs will be
uninitialized when a driver later probes it.

Fix by saving and restoring config space over a runtime suspend cycle
even if the device is not bound.

Cc: Bjorn Helgaas <bhelgaas at google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
[lukas: add commit message, bikeshed code comments for clarity]
Signed-off-by: Lukas Wunner <lukas at wunner.de>
---
Changes since v1:
- Replace patch to use pci_save_state() / pci_restore_state()
  for consistency between runtime PM code path of bound and unbound
  devices. (Rafael, Bjorn)

 drivers/pci/pci-driver.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 3bed6beda051..6a67cdbd0e6a 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -1224,11 +1224,14 @@ static int pci_pm_runtime_suspend(struct device *dev)
 	int error;
 
 	/*
-	 * If pci_dev->driver is not set (unbound), the device should
-	 * always remain in D0 regardless of the runtime PM status
+	 * If pci_dev->driver is not set (unbound), we leave the device in D0,
+	 * but it may go to D3cold when the bridge above it runtime suspends.
+	 * Save its config space in case that happens.
 	 */
-	if (!pci_dev->driver)
+	if (!pci_dev->driver) {
+		pci_save_state(pci_dev);
 		return 0;
+	}
 
 	if (!pm || !pm->runtime_suspend)
 		return -ENOSYS;
@@ -1276,16 +1279,18 @@ static int pci_pm_runtime_resume(struct device *dev)
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
 	/*
-	 * If pci_dev->driver is not set (unbound), the device should
-	 * always remain in D0 regardless of the runtime PM status
+	 * Restoring config space is necessary even if the device is not bound
+	 * to a driver because although we left it in D0, it may have gone to
+	 * D3cold when the bridge above it runtime suspended.
 	 */
+	pci_restore_standard_config(pci_dev);
+
 	if (!pci_dev->driver)
 		return 0;
 
 	if (!pm || !pm->runtime_resume)
 		return -ENOSYS;
 
-	pci_restore_standard_config(pci_dev);
 	pci_fixup_device(pci_fixup_resume_early, pci_dev);
 	pci_enable_wake(pci_dev, PCI_D0, false);
 	pci_fixup_device(pci_fixup_resume, pci_dev);
-- 
2.15.1