[PATCH 1/1] drm: Add dirty_rects atomic blob property for drm_plane
Daniel Vetter
daniel at ffwll.ch
Mon Mar 5 08:37:36 UTC 2018
On Wed, Feb 28, 2018 at 09:10:46PM +0000, Deepak Singh Rawat wrote:
>
>
> > -----Original Message-----
> > From: dri-devel [mailto:dri-devel-bounces at lists.freedesktop.org] On Behalf
> > Of Daniel Vetter
> > Sent: Thursday, December 21, 2017 5:11 AM
> > To: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Cc: airlied at linux.ie; daniel.vetter at intel.com; dri-
> > devel at lists.freedesktop.org; Lukasz Spintzyk
> > <lukasz.spintzyk at displaylink.com>
> > Subject: Re: [PATCH 1/1] drm: Add dirty_rects atomic blob property for
> > drm_plane
> >
> > On Thu, Dec 21, 2017 at 02:46:55PM +0200, Ville Syrjälä wrote:
> > > On Thu, Dec 21, 2017 at 12:10:08PM +0100, Lukasz Spintzyk wrote:
> > > > Change-Id: I63dce004f8d3c5dc6a7c71070f1fab0707286ea5
> > > > Signed-off-by: Lukasz Spintzyk <lukasz.spintzyk at displaylink.com>
> > > > ---
> > > > drivers/gpu/drm/drm_atomic.c | 10 ++++++++++
> > > > drivers/gpu/drm/drm_mode_config.c | 6 ++++++
> > > > drivers/gpu/drm/drm_plane.c | 1 +
> > > > include/drm/drm_mode_config.h | 5 +++++
> > > > include/drm/drm_plane.h | 3 +++
> > > > 5 files changed, 25 insertions(+)
> > > >
> > > > diff --git a/drivers/gpu/drm/drm_atomic.c
> > b/drivers/gpu/drm/drm_atomic.c
> > > > index b76d49218cf1..cd3b4ed7b04c 100644
> > > > --- a/drivers/gpu/drm/drm_atomic.c
> > > > +++ b/drivers/gpu/drm/drm_atomic.c
> > > > @@ -759,6 +759,14 @@ static int drm_atomic_plane_set_property(struct
> > drm_plane *plane,
> > > > state->rotation = val;
> > > > } else if (property == plane->zpos_property) {
> > > > state->zpos = val;
> > > > + } else if (property == config->dirty_rects_property) {
> > > > + bool replaced = false;
> > > > + int ret = drm_atomic_replace_property_blob_from_id(dev,
> > > > + &state->dirty_blob,
> > > > + val,
> > > > + -1,
> > > > + &replaced);
> > > > + return ret;
> > > > } else if (plane->funcs->atomic_set_property) {
> > > > return plane->funcs->atomic_set_property(plane, state,
> > > > property, val);
> > > > @@ -818,6 +826,8 @@ drm_atomic_plane_get_property(struct
> > drm_plane *plane,
> > > > *val = state->rotation;
> > > > } else if (property == plane->zpos_property) {
> > > > *val = state->zpos;
> > > > + } else if (property == config->dirty_rects_property) {
> > > > + *val = (state->dirty_blob) ? state->dirty_blob->base.id : 0;
> > > > } else if (plane->funcs->atomic_get_property) {
> > > > return plane->funcs->atomic_get_property(plane, state,
> > property, val);
> > > > } else {
> > > > diff --git a/drivers/gpu/drm/drm_mode_config.c
> > b/drivers/gpu/drm/drm_mode_config.c
> > > > index bc5c46306b3d..d5f1021c6ece 100644
> > > > --- a/drivers/gpu/drm/drm_mode_config.c
> > > > +++ b/drivers/gpu/drm/drm_mode_config.c
> > > > @@ -293,6 +293,12 @@ static int
> > drm_mode_create_standard_properties(struct drm_device *dev)
> > > > return -ENOMEM;
> > > > dev->mode_config.prop_crtc_id = prop;
> > > >
> > > > + prop = drm_property_create(dev, DRM_MODE_PROP_BLOB,
> > > > + "DIRTY_RECTS", 0);
> > > > + if (!prop)
> > > > + return -ENOMEM;
> > > > + dev->mode_config.dirty_rects_property = prop;
> > > > +
> > > > prop = drm_property_create_bool(dev,
> > DRM_MODE_PROP_ATOMIC,
> > > > "ACTIVE");
> > > > if (!prop)
> > > > diff --git a/drivers/gpu/drm/drm_plane.c
> > b/drivers/gpu/drm/drm_plane.c
> > > > index 37a93cdffb4a..add110f025e5 100644
> > > > --- a/drivers/gpu/drm/drm_plane.c
> > > > +++ b/drivers/gpu/drm/drm_plane.c
> > > > @@ -258,6 +258,7 @@ int drm_universal_plane_init(struct drm_device
> > *dev, struct drm_plane *plane,
> > > > drm_object_attach_property(&plane->base, config-
> > >prop_src_y, 0);
> > > > drm_object_attach_property(&plane->base, config-
> > >prop_src_w, 0);
> > > > drm_object_attach_property(&plane->base, config-
> > >prop_src_h, 0);
> > > > + drm_object_attach_property(&plane->base, config-
> > >dirty_rects_property, 0);
> > > > }
> > > >
> > > > if (config->allow_fb_modifiers)
> > > > diff --git a/include/drm/drm_mode_config.h
> > b/include/drm/drm_mode_config.h
> > > > index e5f3b43014e1..65f64eb04c0c 100644
> > > > --- a/include/drm/drm_mode_config.h
> > > > +++ b/include/drm/drm_mode_config.h
> > > > @@ -599,6 +599,11 @@ struct drm_mode_config {
> > > > * &drm_crtc.
> > > > */
> > > > struct drm_property *prop_crtc_id;
> > > > + /**
> > > > + * @dirty_rects_property: Optional plane property to mark damaged
> > > > + * regions on the plane framebuffer.
> > >
> > > What exactly would the blob contain?
> > >
> > > The comment seems to be implying these are in fb coordiantes as
> > > opposed to plane crtc coordinates? Not sure which would be more
> > > convenient. At least if they're fb coordinates then you probably
> > > want some helpers to translate/rotate/scale those rects to the
> > > crtc coordinates. Actual use depends on the driver/hw I suppose.
> >
> > Yeah I think we also should add a decoded state to the drm_plane_state,
> > which has the full structure and all the details.
>
> Hi Daniel,
>
> I am working on this functionality to implement the helper functions to
> convert dirty clips from framebuffer coordinates to planes coordinates
> and finally to crtc coordinates.
>
> Is there a reason we should have decoded dirty clips in plane_state ?
> I was thinking to have the clips remain in blob property and decode
> them when needed with the helper function which accept plane state and
> similarly another helper for crtc coordinates. So driver call these helper
> only if there is a need for dirty clips and otherwise can ignore.
Immediately decoding the state blobs is simply best practices, to avoid
duplicated code and subtle differences in driver behaviour. If there's a
good reason for completely different behaviour (like crtc vs plane
coordinate based damage tracking), then decoding using a helper,
on-demand, seems sensible.
I'd still think we should store the resulting derived state in
drm_crtc/plane_state, like we do for the plane clipping helpers (at least
after Ville's latest patch series has landed).
-Daniel
>
> Thanks,
> Deepak
>
>
> >
> > And when we discussed this iirc we've identified a clear need for at least
> > some drivers to deal in crtc dirty rectangles. I think the initial core
> > support should include a helper which takes an atomic update for a given
> > crtc, and converts all the plane dirty rectangles into crtc rectangles.
> > Including any full-plane or full-crtc upgrades needed due to e.g.
> > reposition, changed gamma, changed blendign/zpos or anything else really
> > that would affect the entire plane respectively crtc. That would also
> > provide a really good model for what damage actually means.
> >
> > Plus ofc we need userspace for this, preferrably as a patch to something
> > generic like weston or xfree86-video-modesetting. And an example kernel
> > implementation.
> >
> > Cheers, Daniel
> >
> > >
> > > > + */
> > > > + struct drm_property *dirty_rects_property;
> > > > /**
> > > > * @prop_active: Default atomic CRTC property to control the active
> > > > * state, which is the simplified implementation for DPMS in atomic
> > > > diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
> > > > index 8185e3468a23..7d45b164ccce 100644
> > > > --- a/include/drm/drm_plane.h
> > > > +++ b/include/drm/drm_plane.h
> > > > @@ -131,6 +131,9 @@ struct drm_plane_state {
> > > > */
> > > > struct drm_crtc_commit *commit;
> > > >
> > > > + /* Optional blob property with damaged regions. */
> > > > + struct drm_property_blob *dirty_blob;
> > > > +
> > > > struct drm_atomic_state *state;
> > > > };
> > > >
> > > > --
> > > > 2.15.1
> > > >
> > > > _______________________________________________
> > > > dri-devel mailing list
> > > > dri-devel at lists.freedesktop.org
> > > > https://urldefense.proofpoint.com/v2/url?u=https-
> > 3A__lists.freedesktop.org_mailman_listinfo_dri-
> > 2Ddevel&d=DwIGaQ&c=uilaK90D4TOVoH58JNXRgQ&r=zOOG28inJK0762SxAf
> > -cyZdStnd2NQpRu98lJP2iYGw&m=04r8F-
> > 0I9tzWCGiUJfjTdf0EjFqdU75F7Ya45iF184Q&s=-
> > PsVynoB9beTmqss0WTxKi0L3nmOe_lcFKabpb55jaE&e=
> > >
> > > --
> > > Ville Syrjälä
> > > Intel OTC
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel at lists.freedesktop.org
> > > https://urldefense.proofpoint.com/v2/url?u=https-
> > 3A__lists.freedesktop.org_mailman_listinfo_dri-
> > 2Ddevel&d=DwIGaQ&c=uilaK90D4TOVoH58JNXRgQ&r=zOOG28inJK0762SxAf
> > -cyZdStnd2NQpRu98lJP2iYGw&m=04r8F-
> > 0I9tzWCGiUJfjTdf0EjFqdU75F7Ya45iF184Q&s=-
> > PsVynoB9beTmqss0WTxKi0L3nmOe_lcFKabpb55jaE&e=
> >
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > https://urldefense.proofpoint.com/v2/url?u=http-
> > 3A__blog.ffwll.ch&d=DwIGaQ&c=uilaK90D4TOVoH58JNXRgQ&r=zOOG28inJK
> > 0762SxAf-cyZdStnd2NQpRu98lJP2iYGw&m=04r8F-
> > 0I9tzWCGiUJfjTdf0EjFqdU75F7Ya45iF184Q&s=YOIl9T_34ABdrpqBnf2-
> > IBYMRBEEBmnUTRTo7czA810&e=
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > https://urldefense.proofpoint.com/v2/url?u=https-
> > 3A__lists.freedesktop.org_mailman_listinfo_dri-
> > 2Ddevel&d=DwIGaQ&c=uilaK90D4TOVoH58JNXRgQ&r=zOOG28inJK0762SxAf
> > -cyZdStnd2NQpRu98lJP2iYGw&m=04r8F-
> > 0I9tzWCGiUJfjTdf0EjFqdU75F7Ya45iF184Q&s=-
> > PsVynoB9beTmqss0WTxKi0L3nmOe_lcFKabpb55jaE&e=
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list