[PATCH 2/4] drm/pl111: Use max memory bandwidth for resolution

[Eric Anholt]

Linus Walleij <linus.walleij at linaro.org> writes:

> We were previously selecting 1024x768 and 32BPP as the default
> set-up for the PL111 consumers.
>
> This does not work on elder systems: the device tree bindings
> support a property "max-memory-bandwidth" in bytes/second that
> states that if you exceed this the memory bus will saturate.
> The result is flickering and unstable images.
>
> Parse the "max-memory-bandwidth" and respect it when
> intializing the driver. On the RealView PB11MP, Versatile and
> Integrator/CP we get a nice console as default with this code.
>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> ---
> ChangeLog v2->v3:
> - Account for the case where there is no bandwidth limitation
>   so priv->memory_bw is zero. Then just accept any modes.
> ChangeLog v1->v2:
> - Exploit the new .mode_valid() callback we added to the
>   simple KMS helper.
> - Use the hardcoded bits per pixel per variant instead of
>   trying to be heuristic about this setting for now.
> ---
>  drivers/gpu/drm/pl111/pl111_display.c | 36 +++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/pl111/pl111_drm.h     |  1 +
>  drivers/gpu/drm/pl111/pl111_drv.c     |  6 ++++++
>  3 files changed, 43 insertions(+)
>
> diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
> index d75923896609..577e61950e16 100644
> --- a/drivers/gpu/drm/pl111/pl111_display.c
> +++ b/drivers/gpu/drm/pl111/pl111_display.c
> @@ -50,6 +50,41 @@ irqreturn_t pl111_irq(int irq, void *data)
>  	return status;
>  }
>  
> +static enum drm_mode_status
> +pl111_mode_valid(struct drm_crtc *crtc,
> +		 const struct drm_display_mode *mode)
> +{
> +	struct drm_device *drm = crtc->dev;
> +	struct pl111_drm_dev_private *priv = drm->dev_private;
> +	u32 cpp = priv->variant->fb_bpp / 8;
> +	u64 bw;
> +
> +	/*
> +	 * We use the pixelclock to also account for interlaced modes, the
> +	 * resulting bandwidth is in bytes per second.
> +	 */
> +	bw = mode->clock * 1000; /* In Hz */
> +	bw = bw * mode->hdisplay * mode->vdisplay * cpp;
> +	bw = div_u64(bw, mode->htotal * mode->vtotal);
> +
> +	/*
> +	 * If no bandwidth constraints, anything goes, else
> +	 * check if we are too fast.
> +	 */
> +	if (priv->memory_bw && (bw > priv->memory_bw)) {
> +		DRM_INFO("%d x %d @ %d Hz, %d cpp, bw %llu too fast\n",
> +			 mode->hdisplay, mode->vdisplay,
> +			 mode->clock * 1000, cpp, bw);
> +
> +		return MODE_BAD;
> +	}
> +	DRM_INFO("%d x %d @ %d Hz, %d cpp, bw %llu bytes/s OK\n",
> +		 mode->hdisplay, mode->vdisplay,
> +		 mode->clock * 1000, cpp, bw);

I think the DRM_INFO should be DRM_DEBUG_KMS.  With that,

Reviewed-by: Eric Anholt <eric at anholt.net>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20180305/4992f0a0/attachment.sig>